Gefen Stereo Receiver EXT HDMI13IR FO 141 User Manual

.3 Over  
with IR  
EXT-HDMI1.3IR-FO-141  
User Manual  
 
TABLE OF CONTENTS  
1
2
3
4
5
6
7
8
9
Introduction / Operation Notes  
Features / Package Includes  
Sender Panel Descriptions  
Receiver Panel Descriptions  
Connecting and Operating the HDMI 1.3 Over Fiber with IR  
HDMI 1.3 Over Fiber with IR Conguration  
RS-232 Serial Interface  
Network Cable Wiring Diagram  
Specications  
10 Warranty  
 
INTRODUCTION  
Congratulations on your purchase of the HDMI 1.3 Over Fiber with IR. Your  
complete satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
HDMI 1.3 Over Fiber with IR  
The Gefen HDMI 1.3 Over Fiber with IR system extends Full 1080p HD deep  
color with multichannel digital audio over a single small strand of ber optic  
cable that can easily be hidden in a wall or above a ceiling. Great distances of  
extension can be obtained thanks to the use of ber optic cable.  
1080p Full HD deep color is displayed at the destination with no signal delays  
and no EMI (electromagnetic interference) disturbances such as cut-outs and  
pixilation, phenomena that can happen often with copper cables, especially at  
long distances. Multichannel digital audio with Dolby TrueHD & DTS Master  
Audio helps to deliver a full HD audio/video home theater experience wherever  
it is needed. The IR back channel is carried on the CAT5 cable, providing  
convenient, local control of video source devices.  
How It Works  
Install the Sender near your High Denition source and the Receiver at the  
Display side. Connect HDMI cables from the Sender to your source and from  
Display to Receiver. Run a single strand of SC ber optic cable from Sender to  
Receiver for AV signals, then run a single CAT5 cable from Sender to Receiver  
for the IR back channel. Plug in the power supplies on the Sender and Receiver,  
and crisp vibrant HDMI 1.3 video will appear on the Display. IR commands  
from the remote control to video source equipment are sent across the IR back  
channel via the CAT5 cable which connects the Sender and Receiver at their  
RJ45 jacks.  
1
 
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE HDMI 1.3 OVER FIBER WITH IR  
Use one SC terminated multi-mode ber optic cable and one industry  
standard CAT-5, CAT-5e or CAT-6 cables to operate the HDMI 1.3 Over  
Fiber with IR. Gefen recommends CAT-6 cabling for maximum performance.  
For 1080p video, maximum extension is 1000 feet (330 meters).  
IR repeater functionality is only from the receiving unit to the sending unit. IR  
data cannot be transmitted from the sending unit to the receiving unit.  
 
FEATURES  
Features  
Immune to electro-magnetic interference (EMI)  
Transmits HDMI 1.3 audio/video at full bandwidth  
1000-foot (330m) extension distance, maximum  
Delivers highest quality signal of any HDMI extension method  
Supports video resolutions up to 1080p, 2K, and 1920 x 1200  
Uses inexpensive and widely available single-strand multimode SC ber  
optic cable  
HDCP Compliant  
HDMI 1.3 Features  
340 MHz (up to 16 bit YUV 444 supported @ 1080p)  
Deep Color Supported (XV Color Supported)  
Dolby TrueHD & DTS Master Supported  
Lip-Sync Pass Through  
CEC Protocol Pass Through  
Package Includes  
(1) HDMI 1.3 Over Fiber with IR - Sender  
(1) HDMI 1.3 Over Fiber with IR - Receiver  
(1) 6 Foot HDMI Cable (M-M)  
(2) 5V DC Power Supply  
(1) User’s Manual  
2
 
SENDER PANEL DESCRIPTIONS  
Front Panel  
HDMI Input  
RS-232  
Input  
IR Blaster  
Output Port  
Power LED  
Indicator  
Back Panel  
SC Fiber  
Optic Port  
RJ-45 Port  
5V DC Power Input  
3
 
RECEIVER PANEL DESCRIPTIONS  
Front Panel  
HDMI  
IR Receiver  
Output  
RS-232  
Output  
Power LED  
Indicator  
Back Panel  
SC Fiber  
Optic Port  
5V DC Power Input  
RJ-45 Port  
4
 
CONNECTING AND OPERATING THE HDMI 1.3 Over Fiber with IR  
1. Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s  
HDMI input port using the supplied HDMI cable.  
2. Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s  
RS-232 input port using the supplied DB-9 serial cable.  
3. For IR repeater functionality, please connect the IR emitter’s mini-jack (sold  
separately, part # EXT-2IREMIT) into the HDMI 1.3 Over Fiber with IR  
sending unit. Place the IR emitter directly on or above the IR receiver of the  
desired source device.  
4. Connect the HDMI 1.3 Over Fiber with IR sending and receiving units  
together using one user supplied SC terminated multi-mode ber optic cable  
and one CAT-5, CAT-5e or CAT-6 cable.  
NOTE: If eld terminating network cable, please adhere to the TIA/EIA568B  
specication. Please see page 7 for more information.  
5. Connect the display to the HDMI output port of the HDMI 1.3 Over Fiber with  
IR receiving unit using a user supplied HDMI cable.  
6. Connect the RS-232 device to the RS-232 output port of the HDMI 1.3 Over  
Fiber with IR receiving unit using a user supplied DB-9 serial cable.  
7. Plug the included 5V DC power supplies into the HDMI 1.3 Over Fiber with  
IR sending and receiving units.  
8. Power on the display rst and the source second.  
5
 
NETWORK CABLE WIRING DIAGRAM  
Gefen has specically engineered their products to work with the TIA/EIA-568-B  
specication. Please adhere to the table below when eld terminating cable for  
use with Gefen products. Failure to do so may produce unexpected results and  
reduced performance.  
Pin  
1
Color  
Orange / White  
Orange  
2
3
Green / White  
Blue  
4
5
6
7
8
Blue / White  
Green  
Brown / White  
Brown  
1 2 3 4 5 6 7 8  
CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.  
Gefen recommends using solid core cabling. CAT-6 cable is also recommended  
for best results.  
Each cable run must be one continuous run from one end to the other. No splices  
or use of punch down blocks.  
7
 
SPECIFICATIONS  
Video Amplier Bandwidth ........................................................................ 340 MHz  
HDMI Input/Output Connector ........................................................... type A, 19 pin  
Link Connector ................................................................................ SC Fiber Optic  
CAT5 Connector ............................................................................................. RJ45  
Input Video Signal .............................................................................. 1.2 Volts p-p  
Input DDC Signal .......................................................................... 5 Volts p-p (TTL)  
Power Supply ............................................................................................... 5V DC  
Dimensions ........................................................... 2.75”W x 4.5”H x 1.2”D (approx)  
Shipping Weight ............................................................................... 5 lbs. (approx)  
8
 

CompuSTAR Automobile Alarm CM4000 User Manual
Craftsman Air Compressor 92116642 User Manual
Craftsman Pressure Washer 919769020 User Manual
Curtis MP3 Player MP510 User Manual
Dual Marine RADAR AMB600W User Manual
Everpure Water System EV3112 User Manual
Extron electronic Stereo System DMP 64 User Manual
Fellowes Paper Shredder 4200CC User Manual
GBC Printer 4064WF 1 User Manual
Generac Power Systems Portable Generator 004988 1 User Manual