GE Monogram Ventilation Hood ZV48RSFSS User Manual

ZV48RSFSS – GE Monogram 48" Stainless Steel Professional Hood  
Dimensions and Specifications (in inches)  
Each hood is shipped with a stainless steel backguard and  
a warming shelf. Hoods may be installed with the shelf or  
backguard alone, or with both as shown.  
12"  
47-15/16"  
22-1/2"  
Warming  
Shelf  
Backguard  
47-15/16"  
25"  
Installation Clearances  
These vent hoods are designed to be installed onto a wall or beneath a  
Note: Clearances may vary due to type of cooking product and local  
codes. Check with local inspectors to be sure standard is applicable.  
soffit or cabinet.  
Installation with Warming Shelf  
Hoods must be installed 32" Min., 38" Max. over any type cooking  
surface when warming shelf is used.  
Installation without Warming Shelf  
Install these hoods 30" Min. to 36" Max. above the cooking surface  
when installed over any professional style cooktop or range.  
These hoods may be installed 24" min. above a gas or electric  
drop-in style cooktop.  
Soffit Installation  
Wall Mount Installation  
SOFFIT  
SOFFIT  
SOFFIT  
SOFFIT  
30" Min.  
36" Max.  
32" Min.  
38" Max.  
30" Min.  
36" Max.  
32" Min.  
38" Max.  
Install these hoods 30" Min. to  
36" Max. over a professional  
style cooktop or range.  
Allow 32" Min. and 38" Max.  
clearance above any cooking  
surface when installed with shelf.  
Install these hoods 30" Min. to  
36" Max. over a professional  
style cooktop or range.  
Allow 32" Min. and 38" Max.  
clearance above any cooking  
surface when installed with shelf.  
In this installation the ductwork running from the top of the hood will  
be concealed in the soffit or upper cabinetry.  
For this installation, a decorative duct cover is available to conceal the  
ductwork running from the top of the hood. Use of the duct cover requires  
special consideration to the installation height above the countertop.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
GE Answer Center service, 800.626.2000.  
Specification Created 10/02  
 
ZV48RSFSS GE Monogram 48" Stainless Steel Professional Hood  
Using Duct Cover Accessories  
To avoid unsightly gaps, plan the hood installation height for duct covers  
use. Use the following formula to calculate the need for one of more  
duct covers and to ensure a trouble free installation.  
We recommend that the vent hood and decorative duct cover (if used)  
be on site before final framing and wall finishing. This will help to  
accurately locate studs, ductwork and electrical service.  
Read these examples carefully to determine the need for one or more  
Ceiling Height  
B
6" or 12" duct covers.  
A = Countertop to ceiling height.  
B = Gap at the top of the hood to the ceiling.  
C = Hood installation height Plus 10" hood height.  
10" Hood  
Height  
A
C
NOTE: Dia. C should be between 40" and 46" (for a 30" to 36" installa-  
tion height). Raise or lower the hood installation height to allow use of  
one or more 6" and 12" duct covers.  
A - B = C  
INSTALLATION EXAMPLES  
24"  
12"  
42"  
38"  
32"  
32"  
8 ft. ceilings: When the hood is installed 32"  
above the cooking surface and there is no  
soffit or upper cabinetry, order one 12" and  
one 6" duct cover accessory.  
9 ft. ceilings: When the hood is installed 38"  
above the cooking surface, order two 12" duct  
cover accessories.  
10 ft. ceilings: When the hood is installed 36"  
above the cooking surface, order three 12" and  
one 6" duct cover accessories.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
Specification Created 10/02  
GE Answer Center service, 800.626.2000.  
 
ZV48RSFSS GE Monogram 48" Stainless Steel Professional Hood  
Features and Benefits  
1200 CFM Vertical Exhaust with Dual Blowers  
Variable Speed Fan Control  
3 Halogen Lamps with 4 Lighting Levels  
Infrared Warming Lamps  
Utensil Rod  
Removable Grease Trays  
Removable Stainless Steel Pattern Filters  
Model ZV48RSFSS Stainless steel  
Specification Created 10/02  
 

Craftsman Snow Blower 48624838 User Manual
DigiPower Battery Charger JS1 V9H User Manual
D Link Network Router DWL G810 User Manual
Earthquake Sound Speaker AWS 502 User Manual
Electro Voice Speaker S188E User Manual
Extron electronic Speaker System SI 3 Black User Manual
Extron electronic Stereo Amplifier DVI DA Plus Series User Manual
Fender Musical Instrument Amplifier 400 User Manual
Foster Refrigerator HR120 LR120 User Manual
Frigidaire Cooktop FGGC3045K S W B User Manual