Fortinet Switch 124dpoe User Manual

FortiSwitch 124D-POE  
QuickStart Guide  
 
Register for Support  
Register your Fortinet product to receive:  
Technical Support  
• New product features  
• Protection from new threats  
Vous devez enregistrer le produit pour recevoir:  
• Support technique  
• Nouvelles fonctionnalitées du produit  
• Protection contre de nouvelles menaces  
La reistrazione ti permette di usufruire di:  
• Supporto Tecnico  
• Nuove funzionalita  
• Proteezione dalle ultime minaccce  
Debe registrar el producto para recibir:  
• Apoyo técnico  
• Nuevas funcionalidades del producto  
• Protección contra ataques  
登録のお願い  
本日ィネ製品の登録してくさい。  
登録すると次のメがあります。  
テクニカルサポト • 機能の追加 • しい脅威への防御  
请马上注册  
您的飞塔产品  
您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护  
Toll free: 1 866 648 4638  
Phone: 1 408 486 7899  
Fax: 1 408 235 7737  
 
Box Includes  
FortiSwitch 124D-POE  
QuickStart Guide  
FortiSwitch 124D-POE  
QuickStart Guide  
Power Cable  
Console Cable  
8 Bracket Screws  
2 Rack-Mount Brackets  
4 Rubber Feet  
4
 
Before You Begin  
Write down details that you may need from your network administrator or ISP.  
DSL PPPoE  
Username  
Password  
Cable Modem DHCP  
It is normal to not require a hostname, but your ISP may require it.  
Hostname  
Static IP address  
IP Address  
Subnet Mask  
Default Gateway  
Primary/Secondary DNS  
QuickStart Guide Video  
5
 
1
Basic Connections  
Internet  
Ethernet Port  
Power Connection  
Connect your device to a power outlet and an Internet connection. This is usually a  
modem, but could also be another device on your network.  
6
 
2
Setup Options  
A
Web Browser with Ethernet cable  
MGMT Port  
To Connect to the GUI  
1. Connect an Ethernet cable.  
2. Configure the management computer to be on the same subnet as the internal  
interface as the FortiSwitch unit:  
IP address: 192.168.1.XXX  
Netmask: 255.255.255.0  
3. Visit https://192.168.1.99 in your web browser.  
4. Login using username “admin” and no password.  
5. Configure your device and save your settings.  
6. Register your device from the dashboard page.  
7
 
   
B
Terminal Emulation with Console  
Cable  
Serial Port  
Console Port  
To Connect to the CLI  
1. Connect the devices console port to the management computer using the provided  
console cable.  
2. Start a terminal emulation program on the management computer, select the  
COM port, and use the following settings:  
Baud Rate: 115200  
Data bits: 8  
Parity: None  
Stop bits: 1  
Flow Control: None  
3. Press Enter on your keyboard to connect to the CLI.  
4. Login using username “admin” and no password. You can now proceed with  
configuring your device.  
Get started by typing “?” for a list of available commands.  
Begin typing a command then type “?” for a list of available ways to complete.  
For example “config ?” will show the lowest level of configuration options.  
8
 
   
9
 
3
Installation  
The FortiSwitch unit can be placed on any flat surface, or mounted in any standard  
19 inch rack unit with the provided rack-mount brackets and screws.  
Please read the Cautions and Warnings section prior to installing your device.  
To install the FortiSwitch unit into a rack  
Caution:  
Electrostatic  
discharge (ESD)  
can damage  
your Fortinet  
1. Ensure that the FortiSwitch unit is placed on a stable  
surface prior to rack-mount installation.  
2. Attach the provided rack-mount brackets to the sides of  
the unit using the provided bracket screws.  
equipment.  
Do not place  
heavy objects on  
the unit.  
To avoid personal  
injury or damage  
to the unit, it is  
recommended  
that two or more  
people install the  
unit into the rack.  
3. Position the FortiSwitch unit in the rack. Ensure there is  
Note: If the unit  
has a redundant  
power supply,  
each power  
enough room around the unit to allow for sufficient air  
flow.  
cable should be  
connected to a  
different power  
source. In this  
way, if one power  
source fails, the  
other may still be  
operational and  
the unit will not  
lose power.  
10  
 
4. Line up the rack-mount bracket holes to the holes on the rack and ensure that the  
FortiSwitch unit is level.  
5. Finger tighten four rack-mount screws to attach the unit to the rack.  
6. Verify that the spacing around the FortiSwitch unit conforms to requirements and that  
the unit is level, then tighten the rack-mount screws with an appropriate screwdriver.  
7. Using the provided power cable, plug the cable into the rear of the unit, and then into  
a grounded electrical outlet or a separate power source such as an uninterruptible  
power supply (UPS) or a power distribution unit (PDU).  
To install the unit on a flat surface  
1. Ensure that the surface onto which the FortiSwitch unit to be installed is clean, level,  
and stable and that there is at least 1.5in (3.8cm) of clearance on all sides to allow  
for adequate airflow.  
2. Attach the provided rubber feet to the bottom of the FortiSwitch unit.  
3. Place the unit in the designated location.  
4. Verify that the spacing around the FortiSwitch unit conforms to requirements and that  
the unit is level.  
1.5in  
1.5in  
5. Using the provided power cable, plug the cable into the rear of the unit, and then into  
a grounded electrical outlet or a separate power source such as an uninterruptible  
power supply (UPS) or a power distribution unit (PDU).  
11  
 
SFP Transceivers  
Transmit Optical Bore  
SFP Cage Sockets  
Caution: SFP  
transceivers are  
static sensitive  
devices. Use  
an ESD wrist  
strap or similar  
grounding device  
when handling  
transceivers.  
Receive Optical Bore  
Extraction Lever  
Socket Latch  
Do not install  
To install the SFP transceivers  
or remove SFP  
transceivers while  
fiber-optic cables  
are still attached.  
This can cause  
damage to the  
cables, cable  
1. Ensure that you are properly grounded.  
2. Remove the caps from the SFP cage sockets on the  
front panel of the unit.  
3. Position the SFP transceiver in front of the cage socket  
opening and ensure that the transceiver is correctly  
oriented. When the transceiver is correctly oriented, the  
extraction lever will be level with the socket latch.  
Note: SFP cage socket orientation may vary. Ensure that  
the SFP transceiver module is correctly oriented each  
time that you are inserting a transceiver.  
connectors,  
and the optical  
interfaces. It may  
also prevent the  
transceiver from  
latching correctly  
into the socket  
connector.  
4. Hold the sides of the SFP transceiver and slide it into the  
cage socket until it clicks into place.  
Note: Installing  
and removing  
SFP transceivers  
can shorten their  
useful life. Do not  
install or remove  
transceivers more  
than is necessary.  
12  
 
5. Press the transceiver firmly into the cage socket with  
your thumb.  
6. Verify that the transceiver is latched correctly by grasping  
the sides of the transceiver and trying to pull it out  
without lowering the extraction lever.  
Caution: Do not  
force the SFP  
transceivers into  
the cage slots.  
If the transceiver  
does not easily  
slide in and click  
into place, it may  
not be aligned  
correctly or may  
be upside down.  
If this happens,  
remove the SFP  
transceiver, realign  
it or rotate it and  
slide it in again.  
If the transceiver cannot be removed, it is installed and  
latched correctly.  
If the transceiver can be removed, reinsert it and press  
harder with your thumb.  
If necessary, repeat this process until the transceiver is  
securely latched into the cage socket.  
To remove the SFP transceivers  
1. Ensure that you are properly grounded.  
2. If applicable, disconnect the fiber-optic cable from the  
transceiver connector and install a clean dust plug in the  
transceivers optical bores.  
Note: Follow  
proper fiber-  
optic handling  
procedures when  
installing and  
removing  
3. Pull the extraction lever out and down to eject the  
transceiver. If you are unable to use your finger to open  
the lever, use a small flat-head screwdriver or other  
similar tool to open the lever.  
SFP transceivers  
to ensure the  
devices remain  
clean and are not  
damaged.  
4. Hold the sides of the transceiver and carefully pull it away  
from the cage socket.  
5. Replace the cap on the SFP cage socket and place the  
removed SFP transceiver into an antistatic bag.  
13  
 
PoE Ports Link/Activity  
Green: Connected  
Flashing Green: Transmitting & receiving data  
Off: No link established  
PoE Ports Power  
Amber: Providing power  
Off: Not providing power  
MGMT  
Power  
Green: The unit is on  
Off: The unit is off  
Alarm  
Amber: The unit has a fault  
Off: No faults detected  
PoE MAX  
Amber: Maximum output power budget reached  
Off: Power available for new PD  
RPS  
Green: Power on and the RPS DC input is normal  
Amber: RPS failure  
Off: Power off, no connection  
MGMT  
Green: Connected  
Flashing Green: Transmitting & receiving data  
Off: No link established  
14  
 
Device Guide  
Ethernet Ports Link/Activity  
Green: Connected  
Flashing Green: Transmitting & receiving data  
Off: No link established  
Ethernet Ports Speed  
Green: Connected at 1Gbps  
Amber: Connected at 100Mbps  
Off: Connected at 10Mbps or not in use  
SFP Ports  
Green: Connected at 1Gbps  
Flashing Green: Transmitting & receiving data  
Off: No link established  
15  
 
Ethernet Ports (RJ-45)  
Gigabit Ethernet ports with smart Power over Ethernet  
(PoE) providing up to a maximum of 100W for all ports  
MGMT  
MGMT (RJ-45)  
Client ports for management  
Default IP address of MGMT 1 is 192.168.1.99  
RPS  
Optional connection for redundant power  
12V DC, 14A and -54V DC, 7.8A  
Console (RJ-45)  
Optional connection to the  
management computer  
Provides access to the CLI  
+12V 14A  
AND  
-54V  
7.8A  
CONSOLE  
DC INPUT FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL  
16  
 
Device Guide  
Ethernet Ports 13 to 24 (RJ-45)  
Gigabit Ethernet ports for connection  
to your network and the Internet  
SFP Ports 25 and 26 (SFP)  
1 Gbps small form-factor pluggable  
transceiver ports  
Power  
100-240V AC, 50-60Hz, 2.5A Max  
AC INPUT  
100-240Vac  
50-60Hz, 2.5A Max  
17  
 
Cautions and Warnings  
Environmental Specifications  
Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions:  
Instructions de montage en rack - Les instructions de montage en rack suivantes ou similaires sont incluses avec les instructions d’installation:  
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be  
greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient  
temperature (Tma) specified by the manufacturer.  
Température ambiante élevée – S’il est installé dans un rack fermé ou à unités multiples, la température ambiante de fonctionnement de l’environnement du  
rack peut être supérieure à la température ambiante de la pièce. Par conséquent, il est important d’installer le matériel dans un environnement respectant la  
température ambiante maximale (Tma) stipulée par le fabricant.  
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not  
compromised.  
Ventilation réduite – Installation de l’équipement dans un rack doit être telle que la quantité de flux d’air nécessaire au bon fonctionnement de l’équipement  
n’est pas compromise.  
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.  
Chargement Mécanique – Montage de l’équipement dans le rack doit être telle qu’une situation dangereuse n’est pas lié à un chargement mécanique inégal.  
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits  
might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this  
concern.  
Surtension – Il convient de prendre l’ensemble des précautions nécessaires lors du branchement de l’équipement au circuit d’alimentation et être  
particulièrement attentif aux effets de la suralimentation sur le dispositif assurant une protection contre les courts-circuits et le câblage. Ainsi, il est  
recommandé de tenir compte du numéro d’identification de l’équipement.  
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than  
direct connections to the branch circuit (e.g. use of power strips).  
Fiabilité de la mise à la terre– Fiabilité de la mise à la terre de l’équipement monté en rack doit être maintenue. Une attention particulière devrait être accordée  
aux connexions d’alimentation autres que les connexions directes au circuit de dérivation (par exemple de l’utilisation de bandes de puissance).  
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude).  
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité  
et l’altitude).  
Safety  
Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries  
according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.  
Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées  
conformément aux réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de SR814.013 s’appliquent aux batteries.  
警告  
本電池如果更換不正確會有爆炸的危險  
請依製造商  
說明書處理用過之電池  
Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without routing to the  
outside plant.  
Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce produit est uniquement connecté aux réseaux PoE sans  
installation externe de routage.  
The RPS connection is intended to be connected to the power source from Fortinet IEC certified/UL Listed equipment. The power rating of the product must  
be less than or equal to the output rating of the power source.  
La connexion de RPS est destiné à être relié à la source de Fortinet CEI de matériel homologué / Listé UL puissance. La puissance nominale du produit doit  
être inférieure ou égale à la puissance nominale de sortie de la source d’alimentation.  
 
Regulatory Compliance  
Federal Communication Commission (FCC) – USA  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received; including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment  
generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful  
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be  
required to correct the interference at his own expense.  
WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the users authority to  
operate the equipment  
Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada  
CAN ICES-3 (A) / NMB-3 (A)  
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regula¬tions of the  
Canadian Department of Communications.  
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le  
Règlement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.  
European Conformity (CE) - EU  
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate  
measures.  
Voluntary Control Council for Interference (VCCI) – Japan  
この装置はラスA情  
報技術装置での装置を 家庭環境で使用す波妨害を引き起こすの場合には使用が適切な対を講ず  
るよう求されることがありますCCI-A  
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan  
甲類的資訊產品,在居住的環境中使用時,可能會造成射頻干擾,在這種情況下,使用者會被求採取某些適當的對策。  
China  
此为A级产品,在生活环境中,该产品可能会造成无线电干扰。这种情况下,可能需要  
用户对其采取切实可行的措施。  
 
Fortinet Product License Agreement / EULA and Warranty Terms  
Trademarks and Copyright Statement  
Fortinet®, FortiGate®, and FortiGuard® are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be trademarks, registered or otherwise, of Fortinet. All  
other product or company names may be trademarks of their respective owners. Copyright © 2014 Fortinet, Inc., All Rights reserved. Contents and terms are subject to change by For-  
tinet without prior notice. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation  
without permission from Fortinet, Inc., as stipulated by the United States Copyright Act of 1976.  
Product License Agreement  
The parties to this agreement are you, the end customer, and either (i) where you have purchased your Product within the Americas, Fortinet, Inc., or (ii) where you have purchased  
your Product outside of the Americas, Fortinet Singapore Private Limited (each referred to herein as “Fortinet”) .CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT (THE OR THIS  
“AGREEMENT” OR “EULA”). USE OF FORTINET PRODUCT(S) AND ANY UPDATES THERETO, INCLUDING HARDWARE APPLIANCE PRODUCTS, SOFTWARE AND FIRMWARE INCLUDED  
THEREIN BY FORTINET, AND STAND-ALONE SOFTWARE PRODUCTS SOLD BY FORTINET (TOGETHER, THE “PRODUCTS”) CONSTITUTES ACCEPTANCE BY YOU OF THE PROVISIONS IN  
THIS AGREEMENT. FORTINET SHALL NOT BE BOUND BY ANY ADDITIONAL AND/OR CONFLICTING PROVISIONS IN ANY ORDER, RELEASE, ACCEPTANCE OR OTHER WRITTEN CORRE-  
SPONDENCE OR OTHER WRITTEN OR VERBAL COMMUNICATION UNLESS EXPRESSLY AGREED TO IN A WRITING SIGNED BY THE GENERAL COUNSEL OF FORTINET. YOUR INSTALLATION  
OR USE OF ANY PRODUCT REPRESENTS AGREEMENT TO THE TERMS HEREIN, AS AMENDED OR UPDATED FROM TIME TO TIME IN FORTINET’S DISCRETION BY FORTINET PUBLISHING  
AN AMENDED OR UPDATED VERSION. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT START THE INSTALLATION PROCESS OR USE THE PRODUCTS. IF  
YOU DO NOT AGREE TO THE PROVISIONS OF THIS AGREEMENT, YOU SHOULD IMMEDIATELY, AND IN NO EVENT LATER THAN FIVE (5) CALENDAR DAYS AFTER YOUR RECEIPT OF THE  
PRODUCT RETURN THE PRODUCTS TO THE LOCATION WHERE YOU OBTAINED THEM FOR A FULL REFUND FROM THE PARTNER SELLING TO YOU.  
1. License Grant.  
This is a license, not a sales agreement, between you and Fortinet. The term “Software”, as used throughout this Agreement, includes all Fortinet and third party firmware and software  
provided to you with, or incorporated into, Fortinet appliances and any stand-alone software provided to you by Fortinet, with the exception of any open source software contained  
in Fortinet’s Products which is discussed in detail in section 15 below, and the term “Software” includes any accompanying documentation, any updates and enhancements of the  
software or firmware provided to you by Fortinet, at its option. Fortinet grants to you a non-transferable (except as provided in section 5 (“Transfer”) and section 15 (“Open Source  
Software”) below), non-exclusive, revocable (in the event of your failure to comply with these terms or in the event Fortinet is not properly paid for the applicable Product) license to  
use the Software solely for your internal business purposes (provided, if a substantial portion of your business is to provide managed service provider services to your end-customers,  
you may use the Software embedded in FortiGate and supporting hardware appliances to provide those services, subject to the other restrictions in this Agreement), in accordance  
with the terms set forth in this Agreement and subject to any further restrictions in Fortinet documentation, and solely on the Fortinet appliance, or, in the case of blades, CPUs or da-  
tabases, on the single blade, CPU or database on which Fortinet installed the Software or, for stand-alone Software, solely on a single computer running a validly licensed copy of the  
operating system for which the Software was designed, or, in the case of blades, CPUs or databases, on a single blade, CPU or database. For clarity, notwithstanding anything to the  
contrary, all licenses of Software to be installed on blades, CPUs or databases are licensed on a per single blade, solely for one blade and not for multiple blades that may be installed  
in a chassis, per single CPU or per single database basis, as applicable. The Software is “in use” on any Fortinet appliances when it is loaded into temporary memory (i.e. RAM). You  
agree that, except for the limited, specific license rights granted in this section 1, you receive no license rights to the Software.  
2. Limitation on Use.  
You may not attempt to, and, if you are a corporation, you are responsible to prevent your employees and contractors from attempting to, (a) modify, translate, reverse engineer,  
decompile, disassemble, create derivative works based on, sublicense, or distribute the Software; (b) rent or lease any rights in the Software in any form to any third party or make the  
Software available or accessible to third parties in any other manner; (c) except as provided in section 5, transfer assign or sublicense right to any other person or entity, or (d) remove  
any proprietary notice, labels, or marks on the Software, Products, and containers.  
3. Proprietary Rights.  
All rights, title, interest, and all copyrights to the Software and any copy made thereof by you and to any Product remain with Fortinet. You acknowledge that no title to the intellectual  
property in the Software or other Products is transferred to you and you will not acquire any rights to the Software or other Products except for the specific license as expressly set  
forth in section 1 (“License Grant”) above.  
4. Term and Termination.  
Except for evaluation and beta licenses or other licenses where the term of the license is limited per the evaluation/beta or other agreement or in the ordering documents, the term of  
the license is for the duration of Fortinet’s copyright in the Software. Fortinet may terminate this Agreement, and the licenses and other rights herein, immediately without notice if you  
breach or fail to comply with any of the terms and conditions of this Agreement. You agree that, upon such termination, you will cease using the Software and any Product and either  
destroy all copies of the Fortinet documentation or return all materials to Fortinet. The provisions of this Agreement, other than the license granted in section 1 (“License Grant”), shall  
survive termination.  
5. Transfer.  
If you are a Fortinet contracted and authorized reseller or distributor of Products, you may transfer (not rent or lease unless specifically agreed to in writing by Fortinet) the Software  
to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a copy of this Agreement, is bound by its terms and conditions,  
and, by selling the Product or Software, you hereby agree to enforce the terms in this Agreement against such end user, (ii) you at all times comply with all applicable United States  
export control laws and regulations, and (iii) you agree to refund any fees paid to you by an end user who purchased Product(s) from you but does not agree to the terms contained  
in this Agreement and therefore wishes to return the Product(s) as provided for in this Agreement. Further, if you are a non-authorized reseller of Products, you are not authorized to  
sell Product(s) or Software, but, regardless, by selling Product(s) or Software, you hereby agree you are bound by the restrictions and obligations herein and are bound to: (i) ensure  
that your customer and the end user receive a copy of this Agreement and are bound in full by all restrictions and obligations herein (ii) enforce the restrictions and obligations in this  
Agreement against such customer and/or end user, (iii) comply with all applicable United States export control laws and regulations and all other applicable laws, and (iv) refund any  
fees paid to you by a customer and/or end user who purchased Product(s) from you but does not agree to the restrictions and obligations contained in this Agreement and therefore  
wishes to return the Product(s) as provided for in this Agreement. Notwithstanding anything to the contrary, distributors, resellers and other Fortinet partners (a) are not agents of  
Fortinet and (b) are not authorized to bind Fortinet in any way.  
6. Limited Warranty.  
Fortinet provides this limited warranty for its product only to the single end-user person or entity that originally purchased the Product from Fortinet or its authorized reseller or distrib-  
utor and paid for such Product. The warranty is only valid for Products which are registered on Fortinet’s Support Website: https://support.fortinet.com; or on the TalkSwitch support  
website: http://global.talkswitch.com; or such other website as provided by Fortinet. For the below software warranty to start, registration must take place within three hundred  
sixty-five (365) days from the date the Product was originally shipped from Fortinet’s facilities or the warranty is null and void and will not be honored. For the hardware warranty, such  
warranty starts on the earlier of the date of Product registration on Fortinet’s Support Website or ninety (90) days from the date that the Product was originally shipped from Fortinet’s  
facilities. It is the Fortinet distributor’s and reseller’s responsibility to make clear to the end user the date the product was originally shipped from Fortinet, and it is the end user’s  
responsibility to understand the original ship date from the party from which the end user purchased the product. All warranty claims must be submitted in writing to Fortinet before  
the expiration of the warranty term or such claims are waived in full, i.e. ninety (90) days from the earlier of registration or the automatically started term for hardware and spare parts  
claims and three hundred sixty-five (365) days from registration within three hundred sixty-five (365) days from shipment for software claims. Fortinet provides no warranty for any  
beta, donation or evaluation Products, for any spare parts not purchased directly from Fortinet by the end-user, for any accessories, or for any stand-alone software.  
Fortinet warrants that the hardware portion of the Products, including spare parts unless noted otherwise (“Hardware”) will be free from material defects in workmanship as compared  
to the functional specifications for the period set forth as follows and applicable to the Product type (“Hardware Warranty Period”): a three hundred sixty-five (365) day limited  
warranty for the Hardware excluding spare parts, , power supplies, and accessories (provided, solely with respect to FortiAP indoor Wi-Fi access point Hardware appliance products  
and FortiSwitch Hardware appliance products other than the FortiSwitch-5000 series (for both excluding spare parts, power supplies, and accessories), the warranty herein shall last  
from the start of the warranty period as discussed above until five (5) years following the product announced end-of-life date), and, for spare parts, power supplies, and accessories,  
solely a ninety (90) days limited warranty. Fortinet’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. This obligation is exclusive of  
transport fees, labor or installation costs, and any other cost which are not directly associated to the Product. Such repair or replacement will be rendered by Fortinet at an authorized  
Fortinet service facility as determined by Fortinet. The replacement Hardware need not be new or of an identical make, model, or part; Fortinet may, in its discretion, replace the defec-  
tive Hardware (or any part thereof) with any reconditioned Product that Fortinet reasonably determines is substantially equivalent (or superior) in all material respects to the defective  
Hardware. The Hardware Warranty Period for the repaired or replacement Hardware shall be for the greater of the remaining Hardware Warranty Period or ninety days from the delivery  
of the repaired or replacement Hardware. If Fortinet determines in its reasonable discretion that a material defect is incapable of correction or that it is not practical to repair or replace  
defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by Fortinet upon return to Fortinet of the defective Hardware. All Hardware (or  
part thereof) that is replaced by Fortinet, or for which the purchase price is refunded, shall become the property of Fortinet upon replacement or refund.  
Fortinet warrants that the software portion of Hardware Products will substantially conform to Fortinet’s then current functional specifications for the Software, as set forth in the  
applicable documentation for a period of ninety (90) days (“Software Warranty Period”), if the Software is properly installed on approved Hardware and operated as contemplated in  
its documentation. Fortinet’s sole obligation shall be to repair or replace the non-conforming Software with software that substantially conforms to Fortinet’s functional specifications.  
Except as otherwise agreed by Fortinet in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted  
by Fortinet for the Software. The Software Warranty Period shall extend for an additional ninety (90) days after any replacement software is delivered. If Fortinet determines in its rea-  
sonable discretion that a material non-conformance is incapable of correction or that it is not practical to repair or replace the non-conforming Software, the price paid by the original  
licensee for the non-conforming Software will be refunded by Fortinet; provided that the non-conforming Software (and all copies thereof) is first returned to Fortinet. The license  
granted respecting any Software for which a refund is given automatically terminates immediately upon refund. For purpose of the above hardware and software warranties, the term  
“functional specifications” means solely those specifications authorized and published by Fortinet that expressly state in such specifications that they are the functional specifications  
referred to in this section 6 of this Agreement, and, in the event no such specifications are provided to you with the Software or Hardware, there shall be no warranty on such Software.  
7. Disclaimer of Other Warranties and Restrictions.  
 
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6 ABOVE, THE PRODUCT AND SOFTWARE ARE PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING,  
WITHOUT LIMITATION, ANY IMPLIED WARRANTY, IMPLIED OR EXPRESS WARRANTY OF MERCHANTABILITY, OR WARRANTY FOR FITNESS FOR A PARTICULAR PURPOSE AND NON-IN-  
FRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED  
TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL SHIPMENT FROM FORTINET. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE  
RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. NOTWITHSTANDING ANYTHING TO THE CONTRARY, THE  
HARDWARE WARRANTY PERIOD DISCUSSED ABOVE DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTIFONE WHICH HAS A NINETY (90) DAY LIMITED WARRANTY  
AND FORTITOKEN WHICH HAS A 365 DAY WARRANTY FROM THE DATE OF SHIPMENT FROM FORTINET’S FACILITIES, AND THE SOFTWARE WARRANTY DOES NOT APPLY TO CERTAIN  
FORTINET PRODUCTS, INCLUDING FORTIGATE-ONE AND VDOM SOFTWARE.  
The warranty in Section 6 above does not apply if the Software, Product or any other equipment upon which the Software is authorized to be used (a) has been altered, except by  
Fortinet or its authorized representative, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Fortinet, (c) has been subjected to  
abnormal physical or electrical stress, misuse, negligence, or accident; (d) is licensed for beta, evaluation, donation, testing or demonstration purposes or for which Fortinet does not  
charge a purchase price or license fee. In the case of beta, testing, evaluation, donation or free Software or Product, the end user acknowledges and agrees that such Software or  
Product may contain bugs or errors and could cause system failures, data loss and other issues, and the end user agrees that such Software or Product is provided “as-is” without any  
warranty whatsoever, and Fortinet disclaims any warranty or liability whatsoever. An end user’s use of evaluation or beta Software or Product is limited to thirty (30) days from original  
shipment unless otherwise agreed in writing by Fortinet.  
8. Governing Law.  
Any disputes arising out of this Agreement or Fortinet’s limited warranty shall be governed by the laws of the state of California, without regard to the conflict of laws principles. In the  
event of any disputes arising out of this Agreement or Fortinet’s limited warranty, the parties submit to the jurisdiction of the federal and state courts located in Santa Clara County,  
California, as applicable.  
9. Limitation of Liability.  
TO THE MAXIMUM EXTENT PERMITTED BY LAW AND NOTWITHSTANDING ANYTHING TO THE CONTRARY, FORTINET IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, TORT, STRICT  
LIABILITY, INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT OR SERVICE OR ANY DAMAGES OF ANY KIND WHATSOEVER, WHETHER  
DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF PROFIT, LOSS OF OPPORTUNITY, LOSS OR DAM-  
AGE RELATED TO USE OF THE PRODUCT OR SERVICE IN CONNECTION WITH HIGH RISK ACTIVITIES, DAMAGE TO PERSONAL OR REAL PROPERTY, WORK STOPPAGE, COMPUTER FAILURE  
OR MALFUNCTION, COMPUTER SECURITY BREACH, COMPUTER VIRUS INFECTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT  
INCLUDING ANY PRODUCT RETURNED TO FORTINET FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF  
ANY BREACH OF THE LIMITED WARRANTY IN SECTION 6 ABOVE, EVEN IF FORTINET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH  
OF THE LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT AS SPECIFICALLY STATED IN SECTION 6 ABOVE.  
10. Import / Export Requirements; FCPA Compliance.  
You are advised that the Products may be subject to the United States Export Administration Regulations and other import and export laws; diversion contrary to United States law and  
regulation is prohibited. You agree to comply with all applicable international and national laws that apply to the Products as well as end user, end-use, and destination restrictions  
issued by U.S. and other governments. For additional information on U.S. export controls see www.bis.doc.gov. Fortinet assumes no responsibility or liability for your failure to obtain  
any necessary import and export approvals. You represent that neither the United States Bureau of Industry and Security nor any other governmental agency has issued sanctions  
against you or otherwise suspended, revoked or denied your export privileges. You agree not to use or transfer the Products for any use relating to nuclear, chemical or biological  
weapons, or missile technology, unless authorized by the United States Government by regulation or specific written license. Additionally, you agree not to directly or indirectly export,  
import or transmit the Products contrary to the laws or regulations of any other governmental entity that has jurisdiction over such export, import, transmission or use. Furthermore,  
you represent that you understand, and you hereby agree to comply with, all requirements of the U.S. Foreign Corrupt Practices Act and all other applicable laws. For beta, testing,  
evaluation, donation or free Products and/or related services, you hereby agree, represent and warrant to Fortinet that (a) receipt of the Products and/or services comply with all  
policies and you have obtained all necessary approvals for such Products and/or services, (b) the Products and/or services are not provided in exchange for Fortinet maintaining  
current business or for new business opportunities, and (c) the Products and/or services are not being received for the benefit of, and are not being transferred to, any government  
entity, representative or affiliate.  
11. U.S. Government End Users.  
The Software and accompanying documentation are deemed to be “commercial computer software” and “commercial computer software documentation,” respectively, pursuant to  
DFAR Section 227.7202 and FAR Section 12.212, as applicable. Any use, modification, reproduction, release, performance, display or disclosure of the Software and accompanying  
documentation by the United States Government shall be governed solely by the terms of this Agreement and shall be prohibited except to the extent expressly permitted by the terms  
of this Agreement and its successors.  
12. Tax Liability.  
You agree to be responsible for payment of any sales or use taxes imposed at any time on this transaction.  
13. General Provisions.  
Except as specifically permitted and required in section 5 (“Transfer”) above, you agree not to assign this Agreement or transfer any of the rights or obligations under this Agreement  
without the prior written consent of Fortinet. This Agreement shall be binding upon, and inure to the benefit of, the successors and permitted assigns of the parties. The United Nations  
Convention on Contracts for the International Sales of Goods is expressly excluded. This Agreement and other Fortinet agreements may be amended or supplemented only by a writing  
that refers explicitly to the agreement signed on behalf of both parties, or, for this Agreement, as otherwise expressly provided in the lead-in above Section 1 above, provided, notwith-  
standing anything to the contrary and except for this Agreement which may be amended or updated as expressly provided in the lead-in above Section 1 above, for any amendment  
or other agreement to be binding on Fortinet, such amendment or other agreement must be signed by Fortinet’s General Counsel. No waiver will be implied from conduct or failure to  
enforce rights nor effective unless in a writing signed on behalf of the party against whom the waiver is asserted. If any part of this Agreement is found unenforceable, that part will be  
enforced to the maximum extent permitted and the remainder shall continue in full force and effect. You acknowledge that you have read this Agreement, understand it, and agree to  
be bound by its terms and conditions.  
14. Privacy.  
By entering into this Agreement, you agree and consent that Fortinet may collect, retain and use personal information supplied, including name, address, and e-mail address of individ-  
uals and payment details and other information. Personal information will be used primarily to provide services and product functionality to end users. Fortinet may also use personal  
information for additional communication, subject to an opt-out notice provided by you in writing per below. Fortinet may engage other companies and individuals to perform functions  
on its behalf, such as payment processing, order fulfillment, marketing programs and customer service. Fortinet may share personal information with such subcontractors in order to  
perform these and other functions, but such subcontractors may not use your personal information for other purposes, unless you agree. By entering into this Agreement, you agree  
and consent to the transfer the supplied personal information to Fortinet’s offices in the United States and elsewhere, for the purposes stated above. For more detailed information  
on the collection, use and transfer of your personal information, and for information on how to opt out of or unsubscribe from the communications described above, please read the  
Fortinet privacy policy on the Fortinet web site (www.Fortinet.com).  
15. Open Source Software.  
Fortinet’s products may include software modules that are licensed (or sublicensed) to the user under the GNU General Public License, Version 2, of June 1991 (“GPL) or GNU Lesser  
General Public License, Version 2.1, of February 1999 (“LGPL) or other open source software licenses which, among other rights, permit the user touse, copy, modify and redistribute  
modules, or portions thereof, and may also require attribution disclosures and access to the source code (“Open Source Software”). The GPL requires that for any Open Source  
Software covered under the GPL, which is distributed to someone in an executable binary format, that the source code also be made available to those users. For any Open Source  
Software covered under the GPL, the source code is made available on this CD or download package. If any Open Source Software licenses require that Fortinet provide rights to use,  
copy or modify a Open Source Software program that are broader than the rights granted in this agreement, then such rights shall take precedence over the rights and restrictions  
herein. Fortinet will provide, for a charge reflecting our standard distribution costs, the complete machine-readable copy of the modified software modules. To obtain a complete  
machine-readable copy, please send your written request, along with a check in the amount of US $25.00, to General Public License Source Code Request, Fortinet, Inc., 899 Kifer Rd,  
Sunnyvale, CA 94086 USA. In order to receive the modified software modules, you must also include the following information: (a) Name, (b) Address, (c) Telephone number, (d) E-mail  
Address, (e) Product purchased (if applicable), (f) Product Serial Number (if applicable). All open source software modules are licensed free of charge. There is no warranty for these  
modules, to the extent permitted by applicable law. The copyright holders provide these software modules “AS-IS” without warranty of any kind, either expressed or implied. In no  
event will the copyright holder for the open source software be liable to you for damages, including any special, incidental or consequential damages arising out of the use or inability  
to use the software modules, even if such holder has been advised of the possibility of such damages. A full copy of this license, including additional open source software license  
disclosures and third party license disclosures applicable to certain Fortinet products, may obtained by contacting Fortinet’s Legal Department at [email protected].  
GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.  
The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say,  
a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in  
the term “modification”.) Each licensee is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output  
from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on  
what the Program does.  
 
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each  
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients  
of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the  
terms of Section 1 above, provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to  
all third parties under the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or  
display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute  
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an  
announcement, your work based on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections  
as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire  
whole, and thus to each and every part regardless of who wrote it.. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,  
the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the  
Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you  
also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections1 and 2 above on a medium customarily used  
for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if  
you received the program in object code or executable form with such an offer, in accord with Subsection b above.)  
Source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules  
it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source  
code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating  
system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a  
designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled  
to copy the source along with the object code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the  
Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their  
licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works.  
These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your  
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify  
the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for  
enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent  
license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended  
to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of  
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through  
any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program  
under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In  
such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present  
version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License  
which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software  
Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which  
is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE  
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE  
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR  
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distribut-  
ed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.  
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to  
form executables.  
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any  
derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another  
language. (Hereinafter, translation is included without limitation in the term “modification”.)  
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it  
contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted,  
and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true  
depends on what the Library does and what the program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on  
each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of  
this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms  
 
of Section 1 above, provided that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the  
facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs  
whatever part of its purpose remains meaningful.  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections  
as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire  
whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather,  
the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the  
Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer  
to this License, so that they refer to the ordinary GNU General Public License, version 2 instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public  
License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from  
that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that  
you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily  
used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the  
requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the  
Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.  
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a  
“work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.  
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the  
source code is not.  
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of  
the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under  
Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and  
distribute that work under terms of your choice, provided that the terms permit modification of the work for your own use and reverse engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this  
License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy  
of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed  
under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or  
source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the  
contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s  
computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the  
modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of  
performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a  
special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel,  
and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the  
license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together  
in an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute  
such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do  
these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the  
Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the  
same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link  
with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License  
will not have their licenses terminated so long as such parties remain in full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works.  
These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your accep-  
tance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or  
modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible  
for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license  
would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License  
would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended  
to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of  
protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of  
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through  
any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library  
under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In  
such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the  
present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of  
this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free  
Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For  
software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two  
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.  
15. The warranty disclaimer contained in Sections 11 and 12 of the preceding GPL License is incorporated herein.  
 
Fortinet Customer Service & Support  
Create a support account, register and manage your products,  
download updates, firmware images and release notes, and  
create technical support tickets.  
Fortinet Document Library  
Up-to-date versions of Fortinet publications for the entire family  
of Fortinet products.  
Training Services  
Course descriptions, availability, schedules, and location of  
training programs in your area.  
Technical Discussion Forums  
Communicate with other customers and Fortinet partners about  
Fortinet products, services, and configuration issues.  
FortiGuard Threat Research and Response  
Up-to-date information on vulnerabilities and threats, includes a  
virus scanner, IP signature look-up, and web filtering tools.  
 

Contec Universal Remote RT U27A iPG User Manual
Crane Humidifier EE 0865 User Manual
Cuisinart Mixer HM 90S User Manual
Desa Ventilation Hood VDVC36BH User Manual
Dukane Projector 8039B User Manual
Edimax Technology Switch Rackmount Fast Ethernet Switch User Manual
Edirol Home Theater Server PR 1000HD User Manual
Fisher Price Automobile 73520 User Manual
Frigidaire Cooktop A01704501 User Manual
Furman Sound Power Supply IT 20 II User Manual