Fortinet Network Card FortiDB 1000B User Manual

LED  
State  
Green  
Description  
QuickStart Guide  
The correct cable is connected to the copper  
10/100/1000 interface and the connected equip-  
ment has power.  
Ports 1 to 4 Left LED  
FortiDB-1000B  
Flashing  
Green  
Network activity at this interface.  
Ports 1 to 4 Right LED  
The interface is connected at 1000 Mbps.  
The interface is connected at 100 Mbps.  
Yellow  
R
Visit these links for more information and documentation for your Fortinet product.  
Technical Documentation - http://docs.forticare.com  
• Fortinet Knowledge Center - http://kc.forticare.com  
• Fortinet Technical Support - http://support.fortinet.com  
© Copyright 2008 Fortinet Incorporated. All rights reserved.  
Products mentioned in this document are trademarks or registered trademarks  
of their respective holders.  
Regulatory Compliance  
FCC Class B Part 15 CSA/CUS  
30 September 2008  
15-31000-78779-20080930  
Package Contents  
Connector  
Type  
Speed  
Protocol  
Description  
Copper gigabit connection to 10/100/1000 copper networks.  
Ports 1 to 4  
RJ-45  
10/100/1000  
Base-T  
Ethernet  
CONSOLE  
DB-9  
USB  
9600 8/N/1  
RS-232 serial Optional connection to the management computer. Provides access to  
the command line interface (CLI).  
USB  
USB  
Optional connection to a USB key for firmware backup and installation.  
R
Ethernet ports  
Power supply  
Ethernet  
ports  
For future  
use  
Console  
USB  
connection  
QuickStart Guide  
2 Mounting Slide Rails  
R
Copyright 2008 Fortinet Incor
Trademarks  
Products mentioned in this do
Welcome  
|
Bienvenue  
|
Willkommen | ?迎  
| 歓  
|
Bienvenido  
|
Benvenuto  
Power Cable  
Straight-through  
Ethernet cable  
Null-Modem Cable  
(RS-232)  
Connecting  
Connect the following to the FortiDB unit. Ensure the FortiDB unit is placed on a stable surface or install in a standard 19 inch rack.  
See the FortiDB-1000B Rack Installation Guide for details.  
Insert one end of a an Ethernet cable into port 1.  
Connect the other end of the Ethernet cable to the network hub or switch.  
Connect the AC Power cable to the Power Supply on the back of the  
FortiDB unit.  
Ethernet cables connect to  
the internal network and to  
the Internet (public switch  
or router)  
Connect the other end of the Power cable to a surge protected  
power bar or power supply.  
Null modem  
Ethernet cables connect to  
the internal network and to  
the Internet (public switch  
or router)  
Power cable  
connects to  
power supply  
cable connects to serial  
port on management  
computer  
Configuration Tools  
Command Line Interface (CLI)  
Web-based manager  
The CLI is a full-featured management tool. Use it to configure the administrator password,  
the interface addresses, the default gateway address, and the DNS server addresses. To  
configure advanced settings, see the Tools and Documentation CD included with the  
FortiDB unit.  
The FortiDB web-based manager is an easy-to-use management tool.  
Use it to configure the administrator password, the interface and default gateway addresses,  
and configure reports.  
Requirements:  
Requirements:  
An Ethernet connection between the FortiDB unit and management computer.  
A web browser such as FireFox or Internet Explorer on the management computer.  
The DB9 serial connection between the FortiDB unit and management  
computer.  
A terminal-emulation application such as HyperTerminal for Windows, on the manage-  
ment computer.  
 

Craftsman Air Compressor 9197255 User Manual
Craftsman Chipper 79585 User Manual
Crate Amplifiers Stereo Amplifier G40C User Manual
Creative Labs Computer Hardware PN 03SB150600000 User Manual
Curtis Handheld TV RT700 User Manual
Cypress Computer Hardware CY8C24094 User Manual
DigiTech Guitar CM 2 User Manual
Dynamic Distributors Stud Sensor 122A21 User Manual
GE Monogram Video Games ZDBC240NBS User Manual
Global Machinery Company Paper Shredder SHS2400 User Manual