POWERSHRED
®
OPERATING INSTRUCTIONS
NOTICE D'UTILISATION
MANUAL DEL PROPIETARIO
BETRIEBSANLEITUNG
320
380
320C
380C
320-2HS
1.710.999.101 – Edition 01/03
320
320C
380
Paper shredder
320-2HS 380C
Contents
Page
1.
2.
3.
4.
5.
6.
7.
8.
9.
Important Safety Instructions .................................................................................. 4
Parts Identification .................................................................................................. 4
Technical Specifications ......................................................................................... 5
Supplies .................................................................................................................. 6
Installation .............................................................................................................. 6
Caution ................................................................................................................... 6
Operation ................................................................................................................ 6
Checklist for Inoperative Machine .......................................................................... 7
Malfunctions ........................................................................................................... 7
10. Maintenance ........................................................................................................... 7
11. Warranty ................................................................................................................. 8
12. Contact for Service ................................................................................................. 8
Edition 01/03
3
320
320C
380
320-2HS
380C
Paper shredder
1. Important Safety Instructions
2. Parts Identification
1
1. Read all instructions before use.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on
the product.
2
3
4
POWERSHRED 320
ON
4. Unplug this product from the wall outlet before
cleaning. Clean with a damp cloth using a mild
soap and water solution. (Do not use abrasives
or petroleum based cleaners.)
5. Place this product as close as possible to
power source for quick and easy unplugging.
6. Do not use this product near water.
7. This product should never be placed near or
over a radiator or heat source.
8
7
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA
Model:
Serial #:
Voltage:
Current:
Motor:
Manufactured:
R
R
5
6
8. Operate from the type power source indicated
on the marking label. If you are not sure of the
type of power available, consult your dealer or
local electricity board.
320
320C
320-2HS
9. Do not allow anything to rest on the power
cord. Do not place this product where people
may walk on the cord.
10. If an extension cord is used with this product,
make sure that the total of the ampere ratings
on the products plugged into the extension cord
do not exceed the extension cord ampere
rating.
1. LED display
2. Rocker switch
3. Cover
5. Caution label
6. Cabinet
7. Cabinet access door
8. Paper feed opening
4. Serial label
11. Do not attempt to service this product yourself,
as opening or removing covers may expose
you to dangerous live parts or other risks.
12. Unplug this product and refer servicing to
qualified personnel under the following
conditions:
1
9
2
3
POWERSHRED 380
4
A) When the power cord or plug is damaged or
frayed.
8
7
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA
Model:
Serial #:
Voltage:
Current:
Motor:
Manufactured:
R
R
B) If liquid has been spilled on the product.
C) If the product has been exposed to rain.
D) If the product does not operate normally when
the operating instructions are followed.
E) If the product has been dropped or the casing
has been damaged.
O
N
5
6
13. Keep out of the reach of children.
14. This shredder should be operated only with an
operator in attendance.
15. Do not use flammable synthetic oil, petroleum-
based products, or aerosols of any kind on or
near shredder at any time.
380
380C
1. Rocker switch
2. LED display
3. Cover
4. Serial label
5. Caution label
6. Cabinet
7. Cabinet access door
8. Paper feed opening
9. Paper guide roller
4
Edition 01/03
320
320C
380
Paper shredder
320-2HS 380C
3. Technical Specifications
Model
320
Model
320C
Model
320-2HS
Model
380
Model
380C
Cutting Style
Strip Cut
Shred Size
High Security
Cross Cut
Cross Cut
Strip Cut
Cross Cut
5/32"
(3.9mm) (5.8mm)
7/32"
5/32" x 1 1/8"
(3.9 x 30mm)
1/25" x 1/5"
(1 x 5 mm)
5/32"
(3.9mm)
7/32"
(5.8mm)
5/32" x 1 1/8"
(3.9 x 30mm)
*Sheet capacity
U.S. (75 g/m2):
N/A
26 - 28
14 - 16
16 - 18
5
N/A
26 - 28
28 - 30
14 - 16
16 - 18
Europe (70 g/m2):
22 - 24 28 - 30
5 - 6
22 - 24
Speed
28 FPM
(140 mm/sec)
22 FPM
(110 mm/sec)
41 FPM
(210 mm/sec)
28 FPM
(140 mm/sec)
22 FPM
(110 mm/sec)
Entry width
10"
(255 mm)
15"
(386 mm)
Motor power
120 V 60 Hz 0.9 H.P.
230 V 50 Hz 0.67 kW
Voltage (Depending on country)
Dimensions (H x W x D)
120 V 60 Hz
230/240 V 50 Hz
30 3/4" x 17 1/2" x 13 5/8"
(781 x 446 x 345 mm)
34" x 21 1/4" x 16 5/8"
(864 x 540 x 422 mm)
Weight
66 lbs (30 kg)
71 lbs (32 kg)
75 lbs (34 kg)
86 lbs (39 kg)
Waste container volume
19 gallons (72 liters)
30.5 gallons (115 liters)
Noise level
In idle 56 dB
Under load 62 dB strip cuts and 70 dB cross cuts
Edition 01/03
5
320
320C
380
320-2HS
380C
Paper shredder
4. Supplies
7. Operation
–
Bags for cut material
(Packed in dispenser carton, 50 or 100 bags
Read operating instructions before
putting shredder into operation
to a roll depending on size. Contact Fellowes
or your local Fellowes dealer for the stock
number of the bag that fits your machine.)
Cutting block oil for cross-cut units
Stock # 35250
Insert plug in power outlet
–
Install waste bag for shredded material
5. Installation
– Open front door and completely remove
bag frame from cabinet
–
–
–
–
Operate this product only from the type of
power source indicated on the marking label
Install the paper shredder so that the plug is
easily accessible
Shredder must be operated only in upright
position
Set up paper shredder so that the ventilation
slots are unobstructed. To ensure sufficient
ventilation of the shredder a minimum distance
of 4" (10 cm) to the wall or to the furniture must
be maintained.
– Fold new bag around frame.
Allow bag to overhang frame by
approximately 7" (20 cm).
– Slide frame with bag back into cabinet
– Close cabinet door.
Switching equipment ON
1
– Press rocker switch to pos. 1
• Switch locks in "on" position
• Equipment is ready for operation
(stand by)
• Green LED lights
– Feed paper
6. Caution
• The shredding process is started by
photo–cells in the paper feed opening.
Insert paper and shredding begins
automatically.
• When the shredding is complete, the
cutting system automatically stops
after approx. 3 sec.
Never insert hand, fingers or any
foreign objects into the feed
opening.
Serious injury may result.
Keep all loose articles of
clothing, ties, jewelery, long hair
or other loose objects away from
feed opening.
Switching equipment OFF
Injury may result.
– Press rocker switch to pos. 3
• Switch resets to center position and the
machine is turned off.
3
Always turn off and unplug the
machine before moving,
servicing, cleaning or any other
conduct other than normal
operation.
Feeding continuous forms
(model 380/380C only)
Serious injury may result.
– Pass the leading edge of the form under
the paper guide roller (1) and into the
paper feed opening (2).
1
2
6
Edition 01/03
320
320C
380
Paper shredder
320-2HS 380C
Door contact ajar / bag full
Red LED lights
8. Checklist for Inoperative Machine
If the equipment does not work properly, please
check the following points first:
– Paper shredder switches off automatically.
2
• Press rocker switch to center position (2).
–
–
–
–
Is the plug inserted?
Is the switch turned on?
Is the cabinet door closed?
Is waste receptacle full?
Empty waste bag.
Is there a paper jam in the shredder?
Is the motor overheated?
Switch machine off and allow motor to
cool down for approximately 15–20 min.
• Make sure cabinet door is properly
closed and/or exchange cut material
bag.
1
–
–
• Return switch to "on" position (1) and
continue shredding
10. Maintenance
If none of the above applies and the equipment still
does not run, please contact our customer service
department.
(Cross cut unit only)
– When shredding capacity drops or the
noise increases.
9. Malfunctions
• Apply oil over full width of cutting
cylinders through the paper entry
(Fellowes Powershred Lubricant
# 35250).
CAUTION: Do not use flammable
synthetic oil, petroleum-based
products, or aerosol lubricants of any
kind.
Paper jam
• Press rocker switch to center position (2)
2
to stop the cutting system
• Press and hold down rocker switch in
pos. 3 to reverse the cutting system and
3
back out jammed material
(paper is pushed out)
• Run cutting system forward and back-
ward several times without feeding
paper.
1
3
Caution!
Do not attempt to force the jammed
material through the machine by
1
• Continue shredding.
3
alternating the cutting system between
forward and reverse
• Remove excess paper
• Return switch to pos. 1 and continue
1
shredding in smaller quantities so as not
to jam the machine further
Note:
The 320-2HS will not run forward again
unless the jammed material has been
completely removed from the throat
Edition 01/03
7
320
320C
380
320-2HS
380C
Paper shredder
11. Warranty
12. Contact for Service
Limited Warranty
Consumer Helpline
Fellowes, Inc. warrants the cutting cylinders of the
machine to be free from defects in material and
workmanship for 20 years from the date of purchase
by the original consumer in the case of models 320,
320C, 380, 380C, 420, 420C, 520 and 520C or 5
years from the date of purchase by the original
purchaser in the case of models 320-2HS, 420-2HS
and 480-2HS. Fellowes warrants all other parts of
the machine to be free of defects in material and
workmanship for 2 years from the date of purchase
by the original consumer (applies to all models
covered in this manual). If any part is found to be
defective during the warranty period, your sole and
exclusive remedy will be repair or replacement, at
Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse,
mishandling or unauthorized repair. ANY IMPLIED
WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED IN
DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. IN NO EVENT
SHALL FELLOWES BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES
ATTRIBUTABLE TO THIS PRODUCT. This warranty
gives you specific legal rights. You may have other
legal rights that vary from this warranty. The
duration, terms and conditions of this warranty are
valid worldwide, except where different limitations,
restrictions or conditions may be required by local
law. For more details or to obtain service under this
warranty, please see below.
Australia
Canada
1-800-33-11-77
1-800-665-4339
001-800-234-1185
1-800-955-0959
00 800 1810 1810
Mexico
United States
Europe
Fellowes Locations
Australia
Benelux
Canada
France
011-613 93303211
011-31-3473-77988
905-475-6320
+ 33 (0) 2-99-22-71-22
+ 39 (0) 5131-4977-0
+ 39 (0) 071-730041
011-81-3-5496-2401
82-2-3464-2884
Germany
Italy
Japan
Korea
Poland
+ 48-22-837-7356
65-6221-3811
Singapore
United Kingdom
+ 44 (0) 1302-836836
Fellowes offers toll free consumer service in the
following regions: United States, Canada, Mexico,
Australia, and Europe. Residents in these regions
should contact the appropriate Consumer Helpline
located on the back of this manual.
If you are unable to access the Consumer Helpline
from your calling area, call the nearest Fellowes
location, also listed on the back of this manual. You
may also contact your local dealer, contact us online
Fellowes, Inc.
ATTN: Customer Service
1789 Norwood Avenue
Itasca, IL 60143
USA
|