MD-CN & MD-CE Water Filters
Part No. 255348 & 255350
Premium quality water filtration created
for use in Marine Applications.
MD Single Head
P/N 169110 (1 Pack)
Replaces P/N EV927401
Designed for use with
MD-CN & MD-CE filter
cartridges.
MD Dual Head Assembly*
P/N 169111 (1 Pack)
Replaces P/N EV927402
Designed for use with
MD-CN & MD-CE filter cartridges.
MD Triple Head Assembly*
P/N 169112 (1 Pack)
Replaces P/N EV927403
Designed for use with
MD-CN Cartridge
P/N 255348 (6 pack)
Replaces P/N EV960123
MD-CE Cartridge
P/N 255350 (6 pack)
Replaces P/N EV961210
MD-CN & MD-CE filter cartridges.
BENEFITS
OPERATION TIPS
• Reduces chlorine taste and odor, bromine* and other off
tastes and odors that can spoil food and beverages
• Change cartridges:
- on a regular 6 month preventative maintenance basis
• Reduces dirt larger than one-half micron in size
- when the pressure gauge indicates a pressure less
than 10 psi when the system is operating
• Exclusive 1/2 micron precoat filtration removes >99% of
asbestos fibers, and >99.95% of cysts such as Cryptospo-
ridium, Giardia, Toxoplasma and Entamoeba
Always flush the filter cartridges after changing.
QUICK-CHANGE MD HEADS
• Cartridge heads are extremely durable and have
corrosion-resistant exterior finishes to withstand severe
marine environments.
INSTALLATION TIPS
• Choose a mounting location which is suitable to support
the full weight of the system when operating
• Use a 3/8" water line for the MD single head
• Use a 3/4" water line for the MD dual and triple heads
• Do not braze/solder fittings into head
• Each quick-change head or head assembly has its own
built-in water shut-off valve and steel mounting bracket.
• Multiple heads are now molded as one piece to minimize
leak points and improve strength.
• Never use a saddle valve for connection
• Do not exceed service flow rate (refer to other side)
• Flush filter cartridges by running water to drain at full
flow through the flushing valve for 5 minutes
* As tested by Everpure
|