RE200
Cardioid, True Condenser
Instrument Microphone
KeyFeatures:
•
Continuous Presence Rise Enhances Sound
Quality
•
•
•
•
True Condenser Design
Transformerless Output
Small, Unobtrusive Profile
Includes Stand Clamp, Windscreen, and
Zippered Vinyl Pouch
GeneralDescription:
Technical Specifications:
The Electro-Voice® RE200 is a cardioid, true condenser
instrument microphone designed for the exacting acoustic
reproduction of choirs, strings, percussion and brass
instruments in live performance and sound recordings. The
RE200 is designed to be used in professional remote
recordings, sound reinforcement systems, sound studios and
motion picture/TV scoring stages.
Generating Element: True condenser (externally biased)
Frequency Response: 50 - 18,000 Hz
Polar Pattern: Cardioid
Sensitivity, Open Circuit 10 mV/pascal
Voltage, 1 kHz:
Clipping Level (1% THD): 130 dB SPL
Equivalent Noise: 21 dB SPL, A weighted (0 dB = 20
micropascals)
The RE200’s frequency response has a continuous presence
rise to enhance the sound quality. The excellent transient
response and smooth frequency response is gently lifted
above 1,000 Hz, lending an open, transparent detail to the
recorded sound.
Dynamic Range: 109 dB
Output Impedance(1 kHz): 200 ohms
Power Requirements: 12-52 Vdc phantom supply
The RE200’s transducer is a true, external biased condenser
element based on the RE2000 transducer design. (Most
studio recording microphones are true condensers because
they have greater sensitivity and stability than an electret
element). The diaphragm is ultrathin, goldlaminated,
environmentally stabilized and ultralow in mass. The electrode
is a precision-cut, singlepiece, ceramic disc layered with gold.
The transducer is biased by an internal dc-to-dc converter to
ensure that its sensitivity and performance is not dependent
on phantom voltage. The RE200 transducer is cradled in an
AcoustiDYMTM shock-mount system for mechanical isolation.
The RE200’s electronics are designed to operate from 12 to
52 Vdc phantom power.
Polarity: Pin 2 positive, referenced to pin 3, with
positive pressure on the diaphragm
Finish: Semigloss “camera” black
Environmental Conditions:
Relative Humidity 0-50%: -20 to 165 °F (-29 to 74 °C)
Relative Humidity 0-95°/a: -20 to 135 °F (-29 to 57 °C)
Dimensions (Mic Only):
Width At Transducer: 1.1 in. (27.9 mm)
Width At Handle: 0.8 in. (20.3 mm)
Length: 5.4 in. (137.2 mm)
Net Weight, Microphone: 6.5 oz (185 g)
Shipping Weight: 16.1 oz (456 g)
The RE200 is small, light and rugged, making it ideal for a
variety of applications without being obtrusive.
Accessories Included: 311 stand clamp
Zippered vinyl carrying pouch
Wind Tech™ 5700-12 black external
foam windscreen1
The RE200 is supplied with the model 311 microphone stand
clamp, a zippered vinyl carrying pouch and a Wind Tech™
5700-12 black external foam windscreen.1
1. Wind Tech™ is a trademark of Olsen Audio Group, Inc. The 5700 windscreen
can be purchased separately from Wind Tech at 480/998-7140.
|