EarthQuake Stereo Equalizer EQ4000PXI User Manual

EARTHQUAKE SOUND  
EQPXI Series Equalizers  
Owners Manual  
MODELS:  
EQ4000PXi  
EQ7000PXi  
The Sound That Will Move You.  
The Sound That Will Move You.  
Earthquake Sound reserves the right to amend details of the specifications without notice.  
Copyright © Earthquake Sound Corporation  
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545  
Phone: 510-732-1000 Fax: 510-732-1095  
 
All specifications are subject to change without notice.  
4
5
 
All specifications are subject to change without notice.  
6
7
 
EQ4000PXi Specifications  
EQ7000PXi Specifications  
Operating Voltage: 10.5---16VDC  
Operating Voltage: 10.5---16VDC  
Idle: 280 mA  
Idle: 170 mA  
Recommended fuse size: 1 Ampere  
Recommended fuse size: 1 Ampere  
Input sources: 2 stereo RCA sources, 1 Phono source  
Input sensitivity: Adjustable from 100mVrms up to 14 Vrms  
Input impedance: Variable from 8 kOhm up to 10.2 Kohm  
Output Impedance:  
Input sources: 2 stereo RCA sources, 1 Phono source  
Input sensitivity: Adjustable from 100mVrms up to 14 Vrms  
Input impedance: Variable from 3.8 Kohm up to 10.2 Kohm  
Output Impedance:  
Sub channel: 510 Ohm  
Sub channel: 510 Ohm  
Front & Rear channels: 2.2 Kohm  
Front & Rear channels: 2.2 Kohm  
Output Level:  
Output Level:  
Subwoofer channel: 5 Vrms @ 0.1% THD  
Front & Rear channels: 4 Vrms @ 0.1% THD  
T H D @ 3 Volts output: 0.05%  
Subwoofer channel: 11 Vrms @ 0.1% THD  
Front & Rear channels: 7 Vrms @ 0.1% THD  
T H D @ 3 Volts output: 0.003%  
Frequency response: 15 - 34000Hz @ -3dB  
Subwoofer frequency control range: 35 to 100Hz (@ -3db, 18dB/oct.)  
Subwoofer upper cut off frequency: 100Hz  
Channel separations: 68dB  
Frequency response: 15 - 34000Hz @ -3dB  
Subwoofer frequency control range: 60 to 160Hz (@ -3db, 18dB/oct.)  
Subwoofer upper cut off frequency: 160Hz  
Channel separations: 68dB  
Signal to noise ratio: 92dB  
Signal to noise ratio: 96dB  
Center frequencies (in Hz): 50, 250, 275, 2200, 16000  
Control Range: 30~40dB (12 O'clock is the Bypass position)  
Dimensions(H x W x D): 1" x 7" x 4-1/4" (With Out Face Plate)  
Center frequencies (in Hz): 45, 120, 275, 700, 2000, 5000, 14000  
Control Range: 18dB (12 O'clock is the Bypass position)  
Dimensions(H x W x D): 1" x 7" x 4-1/4" (With Out Face Plate)  
EQ4000PXi Features  
EQ7000PXi Features  
* 4-band Graphic Equalizer  
* 7-band Graphic Equalizer  
* 6-channel RCA Outputs (front/rear/subwoofer)  
* Adjustable Master Volume Level Control  
* Adjustable Subwoofer Level Control  
* 3 Input Sources  
* 6-channel RCA Outputs (front/rear/subwoofer)  
* Adjustable Master Volume Level Control  
* Adjustable Subwoofer Level Control  
* 3 Input Sources  
* Input Gain (it Sets The Maximum Volume Level Achievable By The Front Controls)  
* Gold Plated RCAs  
* Input Gain (it Sets The Maximum Volume Level Achievable By The Front Controls)  
* Gold Plated RCAs  
* Easy Snap On Connector  
* Easy Snap On Connector  
* Red Led Background Display  
* Bypass Position Notches On All 7-bands  
* Blue Background LEDs  
All specifications are subject to change without notice.  
8
9
 
Care and Maintenance  
Your Earthquake Stereo 7-Band Graphic Equalizer is an example of superior design and  
craftsmanship. The following advisories will help you care for your equalizer so you can  
enjoy it for years to come.  
Keep the graphic equalizer dry. If it gets wet, wipe it dry immediately.  
Liquids contain minerals that can corrode electronic circuits. Additionally  
liquids can cause severe electrical shock.  
Use and store the graphic equalizer only in normal temperature  
environments. Temperature extremes can shorten the life of electronic  
devices and warp or melt plastic parts.  
Handle the graphic equalizer gently and carefully. Dropping it can  
damage the circuits or cause components to break or become loose.  
These kind of actions can cause the units to work poorly or improperly.  
Keep the graphic equalizer away from dust and dirt, which can cause  
premature wear of parts.  
Earthquake products are capable of generating high sound pressure levels. You  
CAUTION:  
should exercise caution when operating these products. Long term exposures to  
high levels of sound pressure will cause permanent damage to your hearing.  
Sound pressure levels exceeding 85dB can be dangerous with constant exposure. Set your audio  
system to a comfortable loudness level. Earthquake Sound Corporation does not assume liability  
for damages resulting from the direct use of Earthquake amplifiers or other Earthquake products ,  
and urges users toplay their music at moderate listening levels.  
SOUND LEVEL  
DURATION IN HOURS  
The Chart (on The Side) Shows The  
Elements.u.s. Governments Occupational  
Safety And Health Administration (osha)  
Regulations Which Were In Effect At The  
Time Of This Publication For Permissible  
Noise Exposure, Per 29cfr1910.95, Table  
G-16.  
90  
92  
95  
8
6
4
3
2
97  
100  
102  
1 - 1 1/2  
1
1/2  
105  
110  
115  
1/4 or less  
All specifications are subject to change without notice.  
10  
11  
 

Compaq Server AA RHGWC TE User Manual
CompuSTAR Automobile Alarm Model P1BAMR User Manual
Cornelius Beverage Dispenser 414384 XXX User Manual
CP TECHNOLOGIES Security Camera FCS 6010 User Manual
Craftsman Blower 79939 User Manual
Crock Pot Slow Cooker 4 7QT User Manual
Dacor Oven ECD ECS User Manual
Everpure Water System EV9100 07 User Manual
GE Monogram Gas Grill Gas Grill User Manual
GE Ventilation Hood ZV1050SF User Manual