Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
UC4000 Series
Self-Contained Undercounter Refrigerator/Freezer
Models
•
UC4048 Undercounter refrigerator
Two section
•
UC4148 Undercounter freezer
Two section
Options &
Accessories
Standard Features
•
Features Delfield’s exclusive ABS interior.
ABS is extremely durable - it won’t dent,
•
•
•
•
Stainless steel back
chip or corrode and is backed by
limited lifetime warranty
a
Plastic laminate on front
Additional shelf
•
•
Stainless steel front, sides and top
3.5” (8.9cm) diameter casters
(recommended for under counter)
5” (12.7cm) diameter caster also
available
Environmentally
refrigerant
friendly
R404A
•
•
Foamed in place environmentally
friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential)
polyurethane cuts energy costs
Four epoxy coated wire shelves standard
installed per unit
•
•
Door lock
UC4048
220 volt, 50 Hertz electrical system
•
•
•
•
Black recessed quick grip handle
Rugged 6” high heavy duty metal legs
Door hinging available on either right or
left, right side is standard
•
7’ cord and plug supplied
Specifications
Exterior top shall be one-piece, 22-gauge stainless steel with
front edge turned down to form nosing and rear edge turned
down.
Evaporator coil and temperature control shall be mounted on
the interior rear wall of the cabinet. Refrigerant flow shall be
controlled by a capillary tube. Cabinet shall maintain 36°F to
40°F (2°C to 4°C) interior cabinet temperature.
Exterior bottom shall be one-piece, 14-gauge galvanized
metal. Exterior ends shall be 22-gauge stainless steel.
THE FOLLOWING APPLIES TO MODEL UC4148 (FREEZER)
ONLY:
Base interior shall be one-piece thermoformed ABS plastic
material, with integral shelf supports. ABS interior is backed
by a limited lifetime warranty. Cabinet shall have (4) epoxy-
coated wire shelves installed. Base shall be fully insulated with
high-density foamed-in-place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane.
Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/3 h.p., with condenser coil and hot
gas condensate evaporator mounted on the rear of cabinet.
Evaporator coil and temperature control shall be mounted on
the interior rear wall of the cabinet. Refrigerant flow shall be
controlled by a capillary tube. Cabinet shall maintain -5°F to
0°F (-21°C to -18°C) interior cabinet temperature.
Doors shall have
a
22-gauge stainless steel exterior, with
a
Electrical connections shall be 115 volt, 60 Hertz, single
thermoformed ABS plastic interior liner, and shall be fully
insulated with foamed-in-place polyurethane. Door handles
shall be black, recessed ABS.
phase. Unit shall have
a
7’ (2.1m) long electrical cord and
NEMA 5-15P plug. Cord and plug shall be located on rear of
cabinet, 16” (40.6cm) above floor, 12” from left side.
REFRIGERATION SYSTEM
Equipment is shipped with loose 6” (15.2cm) high metal legs
THE
FOLLOWING
APPLIES
TO
MODEL
UC4048
with black enamel finish unless mounting is
original sales order.
specified on
(REFRIGERATOR) ONLY:
Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/5 h.p., with condenser coil and hot
gas condensate evaporator mounted on rear of cabinet.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Fax: 800-669-0619
Phone: 800-733-8948 or 989-773-7981
|