COMBINATION INSTALLATIONS
PLANNING
GUIDE
Microwave/Warming Oven
Revised
08/26/08
1/1
All tolerances: +1/16”, -0, (+1.6mm, -0) unless otherwise stated
7/8“ (22mm) Min.
120V
Microwave
Receptacle
16 3/4"
(425mm)
29"
“A”
(737mm)
Overall
Stacked
Height
1
1
1 1/2"
(38mm)
Min.
“B”
120V Warming
9 1/8"
(232mm)
Oven Receptacle
3/4"
(19mm)
Min.
3/4“ (19mm) Min.
“A”
19 1/8"
(486mm)
CUTOUT DIMENSIONS
DMT2420 ShOWN
120V
Microwave
Receptacle
31 1/8"
(791mm)
Overall
Stacked
Height
1
1
1 3/8"
(35mm)
Min.
“B”
120V Warming
9 1/8"
(232mm)
Oven Receptacle
3/4"
(19mm)
Min.
NOTE:
1. 3/4” (19mm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors
shown is minimum required to allow for ventilation
and prevent scraping. Additional space may need
to be added for appearance.
CUTOUT DIMENSIONS
DCM24 ShOWN
Microwave
Warming
Model No.
“A” Cutout Width
24 3/8” (619mm)
25 1/4” (641mm)
28 1/4” (718mm)
25” (635mm)
Oven
Models
“B” Cutout Width
25 1/2” (648mm)
28 1/2” (724mm)
34 3/8” (873mm)
DMT2420 w/Trim Kit
DCM24 w/ACTK27
DCM24 w/ACTK30
DCM24 w/ACTK36
27”
30”
36”
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
CI.26
|