Curtis DVD Player DVD1100 User Manual

DVD1100  
DVD1100  
User Manual  
Please read this User Manual carefully to ensure proper use of this  
product and keep this manual for future reference.  
 
Important Safety Instructions  
Introduction  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings, install in accordance with the instructions.  
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protected the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Unplug this apparatus during lighting storms or when unused for long periods of time.  
13) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been dropped.  
14) Mains plug is used as the disconnect device, the disconnect device shall remain  
readily operable.  
15) The ventilation should not be impeded by covering the ventilation openings with items,  
such as newspapers, table-cloth, curtains, etc.  
16) No naked flame sources, such as lighted candles, should be placed on the apparatus.  
17) Attention should be drawn to the environmental aspects of battery disposal.  
18) The use of apparatus in moderate climate.  
19)Portable Cart Warning  
A product and cart combination should be moved with care. Quick stop,  
excessive force, and uneven surface may cause the product and cart  
combination to overturn.  
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain  
or moisture.  
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or  
the like.  
The symbol indicates that dangerous voltages constituting a risk of electric shock  
are present within this unit.  
The symbol indicates that there are important operating and maintenance  
instructions in the literature accompanying this unit.  
This symbol indicates that this product incorporates double insulation between  
hazardous main voltage and user accessible parts. When servicing use only  
identical replacement parts.  
2
 
Please use theoriginal box andpacking materials forsafe transportation ofthis  
product.  
It is normalfor the coverand rear panelto become warmafter the playerhas been  
operation for anextended period oftime.  
Do not movethis product duringplayback. Doing somay cause damageto the  
pickup and thedisc.  
Press OPEN/CLOSE onthe front panelor remote toopen or closethe disc tray.  
Do not pushor touch thetray while itis opening orclosing.  
Introduction  
Features  
Disc formats supported by this player:  
32  
BD-ROM  
Subtitle choices  
Audio choices  
Dolby Digital  
8
DTS-HD  
DVD video  
Multi-angle  
Parental Lock  
R
RESTRICTED  
9
This product incorporates copyright protection technology that is protected by U.S. patents and  
other intellectual property rights. Use of this copyright protection technology must be authorized  
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise by  
Macrovision. Reverse engineering or disassembly is prohibited.  
Manufactured under licensefrom Dolby Laboratories. Dolby and thedouble-D symbol aretrade  
marks of DolbyLaboratories.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)  
this device may not cause harmful interference, and(2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Manufactured under licenseunder U.S. Patent# s: 5,451,942; 5,956,674;5,974,380; 5,978,762;  
6,487,535 & otherU.S. and worldwidepatents issued &pending. DTS isa registered trademark  
and the DTSlogos, Symbol, DTS-HDand DTS-HDAdvanced Digital Outare trademarks ofDTS,  
Inc. c 1996-2008 DTS, Inc. AllRights Reserved.  
5
3
 
Front panel  
10  
1
2
3
4
5
6
7
8
9
9
1
5
6
SENSOR  
PREV BUTTON  
NEXT BUTTON  
POWER  
10  
CABIN DOOR  
OPEN/CLOSE BUTTON  
PLAY/PAUSE BUTTON  
STOP BUTTON  
2
3
4
BD LIGHT  
7
8
VFD SCREEN  
Rear panel(2CH Audio output)  
1
2
3
4
5
6
7
2 CH Audio output(L,R)  
COMPOSITE VIDEO output  
1
3
5
7
2
Component Video output(Y,Pb, Pr)  
Digital AudioCOAXIAL output  
HDMI output  
4
6
Digital Audio OPTICAL output  
SERVICE(upgrade only)  
4
 
Introduction  
Remote Control  
Remote Control  
OPEN/CLOSE  
STANDBY  
OPEN/CLOSE  
STANDBY  
20  
1
ANGLE  
SUBTITLE  
AUDIO  
AUDIO  
2
3
21  
ANGLE  
POP MENU/TITLE MENU  
RANDOM  
SUBTITLE  
RANDOM  
MENU  
22  
4
5
POP MENU/TITLE  
6
BONUS  
VIEW  
SECONDARY  
AUDIO  
SECONDARY  
SUBTITLE  
SECONDARY AUDIO  
7
8
23  
24  
MOVE(  
SETUP  
STEP  
REV  
)
COLOUR (RED,  
GREEN, YELLOW,BLUE)  
ENTER  
9
SECONDARY SUBTITLE  
BONUS VIEW  
SETUP  
DISPLAY  
25  
26  
STEP  
FWD  
SLOW  
10  
11  
REV  
PREV  
NEXT  
ENTER  
FWD  
27  
28  
12  
13  
MUTE  
STOP  
DISPLAY  
SLOW  
VOL+  
VOL-  
14  
15  
29  
30  
31  
+
VOL  
16  
17  
0-9 NUMBER KEY  
REPEAT  
NEXT  
PREV  
PLAY  
MUTE  
PAUSE  
STOP  
1
4
7
2
5
8
3
32  
33  
34  
6
9
A-B  
0
GOTO  
A-B  
RESOLUTION  
RETURN  
18  
19  
RETURN  
REPEAT  
32  
33  
34  
RESOLUTION  
GOTO  
Battery installation  
1.Open the cover  
2.Install batteries  
3.Close the cover  
Notes:  
Using the remote  
Point the remote control at the remote sensor.  
Point the remote control directly at the  
player's remote sensor.  
(The pictures below are for reference only.)  
Do not leave the remote control in an  
extremely hot or humid place.  
Do not spill water or put anything wet on  
the remote control.  
STANDBY  
ANGLE  
OPEN/CLOSE  
SUBTITLE  
AUDIO  
POP MENU/TITLE MENU  
RANDOM  
Inserting the 2AAA 1.5V batteries making  
sure the polarity (+ or -) of the batteries  
matches the polarity marks inside the unit.  
BONUS  
VIEW  
SECONDARY  
AUDIO  
SECONDARY  
SUBTITLE  
ENTER  
SETUP  
DISPLAY  
STEP  
FWD  
SLOW  
REV  
PREV  
NEXT  
MUTE  
STOP  
+
VOL  
1
4
7
0
2
5
3
6
8
9
GOTO  
RESOLUTION  
REPEAT  
A-B  
RETURN  
5
 
Connections  
HDMI  
Y
U
V
R
L
VIDEO  
AUDIO IN  
VIDEO IN  
YPbPr IN  
HDMI IN  
CONNECT BD PLAYER TO TV SET BYAVCABLE  
Connect the BD player s Land R jack to the audio input jack on the TV.  
Connect the BD player s video out jack to the video input jack of TV.  
CONNECT THE BD PLAYER TO TV SET USING THE Y/Pb/Pr JACKS  
Use the COMPONENTCable(not supplied) to connect BD player to your TV.  
Set the [Primary output] to [Component].  
Connect the BD player s Land R jack to the audio input jack on the TV.  
Notes: The BD player component output supports 1080i, 720P, 576P and 576i.  
You can press RESOLUTION key on the remote controller to set the BD player  
component output. If your TV does not accept your resolution setting, an  
abnormal picture appears on the screen. Please read TV s owner s manual then  
set the resolution that your TV can accept.  
CONNECT THE BDPLAYER TO TV SET USING THEHDMI OUTPUT  
Use the HDMIcable (not supplied)to connect BDplayer to yourTV.  
Notes: The player supports video resolutionup to 1080p60Hz on HDMIoutput. If  
the player isset to aresolution the TV cannot support, picture will becomeabnormal.  
Press the RESOLUTION button under STOP status to change theoutput resolution.  
The player canalso perform autodetection of supportedTV resolution via EDID in  
order to avoidthe setting ofunsupported resolution.  
6
 
Connections  
Connecting to an AV Amplifier with Digital Audio Input  
or  
Coaxial  
Optical  
Digital Amplifier  
Notes:  
1. Select the Coaxial or Optical digital audio output.  
2. Set the digital Amplifier to the AVinput connected to the BD player.  
7
 
FUNCTION OPERATION  
,
Function Buttons  
OPEN/CLOSE  
To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE  
again.  
AUDIO  
During BD, DVD playback, press AUDIO can select different audio language.  
During VCD playback, press AUDIO button to switch between LEFT/RIGHT/STEREO  
channels.  
SUBTITLE  
Press the button to choose different captions(Requires support from disc).  
RANDOM  
During CD playback, press RANDOM button for random sequence playing.  
MENU  
During BD, DVD playback, press MENU to display the disc menu of the current title.  
Note: This function is subject to the disc.  
During VCD playback, press MENU to control PBC ON/OFF.  
COLOUR( RED/GREEN/YELLOW/BLUE)  
Use the buttons as indicated by the video display during BD-ROM disc playback.  
(Requires disc support)  
DISPLAY  
Press the button to show the information of the current playing disc.  
A-B  
During playback, press A-B to select point A, press it again to select point B. The player will  
repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat and  
clear points A and B.(Requires disc support)  
Note: During CD/VCD playback, points A and B must be within the same track. During BD,  
DVD playback, points A and B can be selected from different chapters.  
ENTER  
Press the button to confirm your choice on screen.  
RETURN  
When VCD disk playing, press RETURN button to return to Main menu (PBC ON only).  
During BD/DVD playback, it acts like RESUME  
SLOW  
During BD, DVD, VCD or SVCD playback, press SLOW for slow motion playback. Once you  
press SLOW, the disc will play at different speed. Press PLAY to resume normal playback.  
8
 
FUNCTION OPERATION  
NEXT  
During BD, DVD,CD or VCD playback, press NEXT toplay the next chapter, title or track.  
PREV  
During BD, DVD, CD or VCD playback, press PREV to play the previous chapter, title or  
track.  
Play  
In pause state or stop state, press the button, the player will be in playing state.  
MUTE  
Press MUTE to turn off the audio, press MUTE again to resume normal sound.  
Pause  
In play state, press the button for the first time and the player will be in pause state.  
STOP  
Press the button once and the player will be in memory stop state. Continuously press  
this button twice and the player will be in complete stop state.  
RESOLUTION  
In the STOP/OPEN TRAY/NO DISC state, Press RESOLUTION key, you can select  
different output resolution for HDMI and component.  
GOTO  
During BD/DVD playback, press GOTO button to choose the desired title or chapter, and  
search the desired title time or chapter time.  
During VCD playback, press GOTO button to search the desired disk time or track time,  
and choose the desired track.(only valid on PBC off)  
During CD playback, press GOTO button to search desired track  
STANDBY  
Press the button to switch the power between normal work mode and standby mode.  
ANGLE  
Press ANGLE button to view the scene from different angles, this function is disc  
dependent.  
Bonus View  
Press Bonus View button to play the secondary video.  
(Picture in picture mode, this function is disc dependent).  
Secondary Subtitle  
Press Secondary Subtitle button to choose subtitle language of the secondary video (this  
function is disc dependent).  
Secondary Audio  
Press Secondary Audio button to choose audio language for the secondary audio (this  
function is disc dependent).  
9
 
FUNCTION OPERATION  
POP MENU/TITLE  
Press the button to enter the appointed title.(Requires disc support)  
During BD playback, press the button to display the disc s popup menu.  
REPEAT  
Each press of the REPEAT button will change the repeat mode.  
During VCD, CD playback, there are three modes: repeat Single, repeat ALL and Off.  
During BD, DVD playback, there are three modes: Repeat Chapter, Repeat Title and OFF.  
Note: During VCD playback, the PBC mode must be set to Off.  
Direction key(UP/DOWN/RIGHT/LEFT)  
Press the keys to move the highlighted bar or cursor on any menu to your selection.  
SETUP  
Press the button to enter the system setting menu. Press the button again to exit the menu.  
STEP  
Press STEP to step a single frame/ picture forward during playback. Press STEP several  
times to step several frames/ pictures forward. Press play to resume playback.  
REV:  
During BD, DVD, CD or VCD playback, press REV to scan in reverse. The player will review  
the disc at different times speed. Press PLAY/PAUSE to resume normal playback.  
FWD  
During BD, DVD, CD, or VCD playback, press  
to scan forward. The player will cue the  
FWD  
disc at different speed. Press PLAY/PAUSE to resume normal playback.  
VOLUME+/-  
Press VOL+ to increase volume and press VOL- to decrease volume.  
0-9 keys  
These keys are used to input the time, as well as title, chapter and track numbers. When a  
numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and  
press ENTER to confirm. When a VCD is playing(with PBC off), press the 0-9 keys to select  
a track directly.  
10  
 
SYSTEM SETUP  
BD Player Setup Menu  
Press SETUP button on remote controller under STOP or TRAY OPEN status to enter Main  
menu. In Main menu, press UP/DOWN button to select desired sub-menus and press  
ENTER button to switch to other sub-menus. In sub-menus, LEFT/RIGHT button are used  
to change options for desired item which was be highlighted.  
Language Menu  
Display Menu  
Audio Menu  
Parental Password Menu  
Diagnostic Menu  
EXIT  
ENTER: switch menuitem  
: make choice  
1. LANGUAGE SETUP  
Select Language in the setup menu, and display the Language submenu:  
Language Menu  
Audio Language  
Subtitle Language  
Menu Language  
OSD Language  
BACK  
English  
None  
English  
English  
To Index Menu  
ENTER: switch menuitem  
: make choice  
1.1 Audio Language : Select default audio language for BD/DVD  
1.2 Subtitle Language: Select default subtitle for BD/DVD.  
1.3 Menu Language:Select default menulanguage for BD/DVD.  
1.4 OSD Language:Select your languagefor player OSD.  
1.5 BACK: Return to mainsetup menu.  
11  
 
SYSTEM SETUP  
2. DISPLAY SETUP  
Select Video in the setupmenu, and displaythe Video submenu:  
Display  
TV Type  
Menu  
NTSC  
16:9  
1080P  
xvYCC  
off  
TV Aspect  
Resolution  
Color Space  
Film Mode  
BACK  
To Index Menu  
ENTER: switch menuitem  
: make choice  
2.1 TV Type: Select TV type.  
2.2 TV Aspect:: Select display configuration for disc.  
16:9: Content presented in 16:9 geometry for widescreen TVs.  
16:9PB: Content presented in 4:3 geometry or cropped content for widescreen TVs.  
4:3: Content presented in 4:3 geometry with horizontal black bars on top and bottom for  
conventional TVs.  
4:3 Pan and Scan: Content cropped to fit within 4:3 geometry for conventional Tvs.  
Note: Under HD(720P / 1080i / 1080P) mode, only 16:9 and 16:9PB are available.  
2.3 Resolution: Select desired resolution.  
2.4 Color Space  
User can select the best color space the TV supported for best color effect  
xvYCC: player implements a fallback algorithm in which the flow is xvYCC->YCC->RGB  
base on EDID information via HDMI  
YCC: player implements a fallback algorithm in which the flow is YCC->RGB base on EDID  
information via HDMI  
RGB: player will output video using RGB color space  
Note: Color space setting only affects HDMI video output. Choose correct option here if you  
know the color space feature of TV, choose xvYCC option to let player decide for you. For  
some special case, e.g. the TV has wrong EDID information, please change color space to  
RGB.  
2.5 Film Mode  
On: player will output disk content recorded at 24 frames per second directly  
Off: player will convert 24frams/sec content to 1080p 60Hz output  
Note: This item is only affect HDMI output, if no HDMI connect to player or TV do not support  
1080p24Hz, it will be locked to “Off” option.  
2.6 BACK: Return to main setup menu.  
12  
 
SYSTEM SETUP  
3. Audio setup menu  
Audio Menu  
Digital Output  
PCM  
PCM Downsampling  
Off  
Dynamic Range Control  
BACK  
Off  
To Index Menu  
ENTER: switch menuitem  
: make choice  
3.1Digital Output  
Choose preferred option for digital output base on receiver connected to player  
PCM: Output PCM audio data for receiver not support Dolby and DTS decoding (mixed  
primary audio, secondary audio and effect audio if available in disk)  
Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio  
only).  
Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p  
rimary audio, secondary audio and effect audio if available in disk)  
Note: Not setting this item properly may result in noise.  
Dolby Digital  
DTS and DTS HD  
3.2 PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as  
some SPDIF receivers do not support 192 kHz or even 96 kHz).  
48 kHz: Downsample audio with sample rates over 48 kHz.  
96 kHz: Downsample audio with sample rates over 96 kHz.  
Off : No downsampling on SPDIF output.  
3.3 Dynamic Range Control: Reduces loudness difference between soft and loud parts of  
the audio track.  
On: Enables dynamic range control for all codecs.  
Follow: Enables dynamic range control for all codecs. MLP streams use the  
DRC level embedded in the audio stream itself.  
Off: Turns off dynamic range control.  
3.4 BACK: Return to main setup menu.  
13  
 
SYSTEM SETUP  
4. Parental control menu:  
Please Input 4-Digit parental password  
ENTER: switch menu item  
: make choice  
Enter right password to enter parental control menu.  
Parental Menu  
Parental Country  
Parental Control  
Parental Level  
Parental Password  
BACK  
USA  
On  
8.Adult  
Default  
To Index Menu  
ENTER: switch menu item  
: make choice  
Note: Factory default password is 6666.  
4.1 Parental Country: Select the movie intended for your residential area.  
USA: Parental country set to USA.  
International: Parental country set to others  
4.2 Parental Control: Activate parental control.  
Off: Turn off parental control.  
On: Turn on parental control.  
4.3 Parental Level Select parental control level, disc cannot be played if preset level on  
disc exceeds the level user set.  
1.Kid Safe  
2.G  
3.PG  
4.PG-13  
5.PG-R  
6.R  
7.NC-17  
8.Adult  
14  
 
SYSTEM SETUP  
4.4 Parental Password: Set parental password.  
Default: Reset to default password  
User Define: Setup user define password  
User defined password setting for parental control.  
Please set 4-Digit Parental password: ----  
ENTER: switch menuitem  
: make choice  
4.5 BACK  
Select this item, then press ENTER to return to main setup menu.  
5. Diagnostic Menu  
Reload Default Setting? (Okay/Canel)  
Erase nonvolatile storage  
OKAY  
OKAY  
ENTER: switch menu item  
: make choice  
Use UP/DOWN to select item, than use LEFT/RIGHT key to change option (OKAY or Cancel).  
Reload Default Setting? (Okay/Canel)  
Loading factory default setting for all items in setup menu  
Erase nonvolatile storage  
Erase storage partition function base on BD-J requirement  
15  
 
SYSTEM SETUP  
6.File Disk Playback----- WMA/MP3/JPEG(WMJ) filesin disk  
After read outthe device withWMJ files, playerwill list alldirectories and filesin  
root directory asbelow picture shown. Press TITLE key to bringout help messages,  
press MENU keyto bring upa pop upmenu which guideyou for specialfeatures,  
press LEFT button to exitpop up menu, press NAVIGATION buttons on remote  
controller to selectdesired item forplayback or enternext level directory.  
16  
 
SYSTEM SETUP  
For music files, in pop upmenu, user canadd current fileinto playlist asfavorite songs,  
and set currentfile as backgroundmusic while JPEGslide show.  
Play  
Add Play List  
Set As BGM  
For Playlist operation, in pop upmenu, user canset play mode, audio mode, and  
remove songs whichhave been addedinto playlist.  
Play  
Set Play Mode  
Set Audio Mode  
Play list  
For JPEG files, in pop upmenu, user canchoose to playcurrent JPEG orslide show  
JPEG files  
Play  
Start Slide Show  
Properties  
For single JPEGfile playback, usercan change toslide show modewith different  
transition effects, rotate current pictureor choose Propertiesto see detailfile  
information.  
Start Slide Show  
Rotate  
Properties  
For JPEG slideshow operation, usercan set timeinterval or transitioneffects for  
JPEG slide showand enable backgroundmusic playback whileJPEG slide show.  
Start Slide Show  
Slide Show Duration  
Slide Show BGM  
Blend  
Film  
Shutter  
Fade  
Curtain  
None  
17  
 
Ensure you have entered the correct AV input for your TV.  
Ensure you have entered the correct AV input for your TV.  
18  
 
Specifications  
Power requirements: AC 100-240 Volt, 50/60Hz  
Power consumption: 35W  
Discs COMPATIBILITY:  
BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW.  
Video out  
Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1  
Audio out  
2 channel out: RCA pin jackx2  
Coaxial out: 0.5V(p-p)75 , RCA pin Jack x l  
Frequency response: 20Hz to 20kHz  
S/N ratio:>90dB  
Total harmonic distortion: <-65dB  
[Accessories]  
Video/ Audio cable x 1  
Remote Control x 1  
User s Manual x 1  
Battery x 2  
Specifications are subject to change without notice.  
Weight and dimensions are approximate.  
19  
 

Clarion CD Player DXZ448R User Manual
Compaq Switch 8 EL User Manual
Craftsman Portable Generator 58032727 User Manual
DigiPower Wheelchair iPT PLC User Manual
Dixon Lawn Mower Accessory 539 131305 User Manual
Dynex Digital Photo Frame DX DPF9 User Manual
Fluke Car Amplifier 5220A User Manual
Garmin All in One Printer 525 User Manual
GE Washer EWA2500 User Manual
Gitzo Camcorder Accessories GT2540LLVL User Manual