50
MDX
SPECIFICATIONS
Pneumatic Tire Lift Trucks
LPG, GAS and DIESEL
15,400 – 18,000 LB CAPACITIES
MDX50 PNEUMATIC TIRE LIFT TRUCK SPECIFICATIONS
GENERAL
Power Type
D70-8
Diesel
G70-8
Gasoline
Sit-Down
D80-8
Diesel
1
2
3
Sit-Down
Sit-Down
Operation Type
Rated Capacity*
(Capacity 600 mm 24 inch Load center)
15,400 (7000)
15,400 (7000)
18,000 (8000)
lbs. (kg)
23.0 (585)
23.0 (585)
26.6 (675)
4
5
Load Distance (From Center of Front Axle)
in. (mm)
in. (mm)
90.5 (2300)
90.5 (2300)
98.4 (2500)
Wheelbase
WEIGHT
Service Weight
20,380 (9245)
31,590 (14330)
4,220 (1915)
8,210 (3725)
11,510 (5220)
19,950 (9050)
31,490 (14289)
3,890 (1765)
8,110 (3680)
11,840 (5370)
24,240 (10995)
37,520 (17020)
4,350 (1975)
6
7
lbs. (kg)
lbs. (kg)
lbs. (kg)
lbs. (kg)
lbs. (kg)
Loaded
Front
Rear
Front
Rear
Axle Loading
10,680 (4845)
13,560 (6150)
Unloaded
TIRE
Tire Type
Pneumatic
8.25-15-14PR (I)
8.25-15-14PR (I)
4x/2
Pneumatic
8.25-15-14PR (I)
8.25-15-14PR (I)
4x/2
Pneumatic
9.00-20-12PR (I)
9.00-20-12PR (I)
4x/2
8
9
Tire Size
Front
Rear
10 Number of Wheel - Front/Rear (x=driven)
57.1 (1450)
64.6 (1640)
57.1 (1450)
64.6 (1640)
60.6 (1540)
66.9 (1700)
Front
Rear
in. (mm)
in. (mm)
Tread,
(center of tires)
11
DIMENSIONS
6/12
6/12
6/12
12 Tilting Angle (Forward/Backward)
13 Mast Height, Lowered with Std. Mast
14 Std. Free Lift with Std. Mast from Ground
15 Max. Fork Height**
degree
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
101.8 (2585)
8.7 (220)
101.8 (2585)
8.7 (220)
106.7(2710)
8.7 (220)
118 (3000)
171.2 (4350)
96.1 (2440)
140.3 (3565)
77.2 (1960)
118 (3000)
171.2 (4350)
96.1 (2440)
140.3 (3565)
77.2 (1960)
118 (3000)
171.2 (4350)
102.7 (2610)
152.5 (3875)
83.5 (2120)
16 Mast Height, Extended with Std. Mast
17 Height, Overhead Guard
18 Length, to fork face
19 Width, at tire
2.5 x 5.9 x 48.0
(65 x 150 x 1220)
2.5 x 5.9 x 48.0
(65 x 150 x 1220)
2.5 x 6.7 x 48.0
(65 x 170 x 1220)
20 Forks (Thickness x Width x Length)
66.9/11.8 (1700/300)
8.8 (225)
66.9/11.8 (1700/300)
8.8 (225)
70.9/13.4 (1800/340)
9.8 (250)
21 Width, Fork Carriage (Max./Min.)
in. (mm)
in. (mm)
22 Ground
Under the Mast
Clearance
11.2 (285)
11.2 (285)
13.2 (335)
at the center of wheelbase in. (mm)
210.8 (5355)
131.9 (3350)
210.8 (5355)
131.9 (3350)
224.2 (5695)
141.7 (3600)
23 Right Angle Stacking Aisle †
24 Turning Radius
in. (mm)
in. (mm)
PERFORMANCE
6.8 (11.0)/18.6 (30.0)
7.5 (12.0)/19.9 (32.0)
89/98 (450/500)
108/98 (550/500)
10,350 (46.1)
6.8 (11.0)/17.4 (28.0)
7.5 (12.0)/19.9 (32.0)
72/77 (365/390)
108/108 (550/550)
9,470 (42.1)
7.5 (12.0)/19.3 (31.0)
7.8 (12.5)/20.5 (33.0)
90/98 (455/500)
98/89 (500/450)
12,950 (57.6)
25 Travel Speed
Loaded, 1st/2nd
mph (km/h)
mph (km/h)
fpm (mm/s)
fpm (mm/s)
(FWD)
Unloaded, 1st/2nd
26 Lifting Speed (Loaded/Unloaded)
27 Lowering Speed (Loaded/Unloaded)
28 Max. Drawbar Pull (Loaded 1.5km/h, 3min rating) lbs. (kN)
29.8
24.2
32.7
29 Max. Gradeability (Loaded 1.5km/h, 3min rating)
%
Hydraulic, Powered
Mechanical
Hydraulic, Powered
Mechanical
Hydraulic, Powered
Mechanical
30 Service Brake
31 Parking Brake
32 Steering
Power Steering
Power Steering
Power Steering
DRIVE
33 Make/Model
KOMATSU S6D102E
103 (77)@2250
289 (392)@1000
6/359 (5880)
NISSAN TB45E
95 (70)@2400
203 (276)@1600
6/273 (4478)
KOMATSU SA6D102E
129 (96)@2250
34 Rated Output/Speed, SAE gross
35 Max.Torque/Speed, SAE gross
36 Number of Cylinder/Displacement
HP (kW) @rpm
lb. - ft. (N-m) @ min-1
cu.in (cm3)
344 (466)@1600
6/359 (5880)
OTHER
37 (140)
2,630 (181)
18 (70)
37 (140)
2,630 (181)
18 (70)
37 (140)
2,630 (181)
18 (70)
37 Fuel Tank Capacity
38 Relief Pressure for Attachment
39 Hydraulic Tank Capacity
40 Clutch
US gal (Ltr)
psi (bar)
US gal (Ltr)
Torque Converter
TORQFLOW
24/52
Torque Converter
TORQFLOW
12/48
Torque Converter
TORQFLOW
24/52
41 Transmission
42 Battery (Voltage/Capacity at 5-hour rating)
V/Ah
NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those
shown. The performance of machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area.
If these specifications are critical or if your needs exceed the specifications shown here, discuss the proposed application with your authorized dealer.
*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.
†Add load distance and clearance. Contact your authorized dealer.
MDX50 TRUCK DATA AND FEATURES
Maximum
Fork
Height
in. (mm)
Overall Height
*Load
Capacity
lbs. (kg)
Back
Tilt
Restriction
Lowered
in. (mm)
Extended
in. (mm)
Free Lift
in. (mm)
D70-8 / G70 -8 2-STAGE VIEW MAST**
D70-8/G70-8
7,000
LOAD CENTER (in.)
24 30
40
50
60
70
118 (3000)
138 (3500)
157 (4000)
177 (4500)
197 (5000)
217 (5500)
236 (6000)
101.8 (2585)
111.6 (2835)
121.4 (3085)
135.2 (3435)
149.0 (3785)
162.8 (4135)
172.6 (4385)
171.3 (4350)
190.9 (4850)
210.6 (5350)
230.3 (5850)
250.0 (6350)
269.7 (6850)
289.4 (7350)
15,000
14,000
6,000
5,000
4,000
12,000
15,400 (7000)
10,000
9,000
8,000
8.7 (220)
12°
3,000
14,770 (6700)
14,330 (6500)
600 800
1600
2000
1200
LOAD CENTER (mm)
D70-8 / G70-8 2-STAGE FULL FREE VIEW MAST***
Note: Capacities shown are for trucks equipped with
2-stage view mast up through 197in. (5000mm) maxi-
mum fork height, 66.9in. (1700mm) carriage,
48in. (1220mm) forks.
Contact your distributor or dealer for capacity
information with other equipment.
118 (3000)
130 (3300)
138 (3500)
157 (4000)
101.8 (2585)
107.7 (3735)
111.6 (2835)
121.5 (3085)
165.7 (4210)
177.6 (4510)
185.4 (4710)
205.1 (5210)
57.3 (1455)
63.2 (1605)
67.1 (1705)
77.0 (1955)
14,550 (6600)
10°
D70-8 / G70-8 3-STAGE FULL FREE VIEW MAST***
157 (4000)
169 (4300)
177 (4500)
197 (5000)
217 (5500)
236 (6000)
94.5 (2400)
98.4 (2500)
100.4 (2550)
108.3 (2750)
116.1 (2950)
124.0 (3150)
201.0 (5105)
212.8 (5405)
220.5 (5600)
240.2 (6100)
259.8 (6600)
279.5 (7100)
55.3 (1405)
59.3 (1505)
61.4 (1560)
69.3 (1760)
77.2 (1960)
85.0 (2160)
14,110 (6400)
6°
13,890 (6300)
13,450 (6100)
12,130 (5500)
Note: Standard mast is shown in broad frame.
*Load capacity at 24in. (600mm) load center.
**50.4 in. (1280mm) height load backrest.
***Free lift and Overall height (Extended)
shown are for truck without load backrest.
Maximum
Fork
Height
in. (mm)
Overall Height
*Load
Capacity
lbs. (kg)
Back
Tilt
Restriction
Lowered
in. (mm)
Extended
in. (mm)
Free Lift
in. (mm)
D80-8 2-STAGE VIEW MAST**
D80-8
LOAD CENTER (in.)
24 30
40
50
60
70
118 (3000)
138 (3500)
157 (4000)
177 (4500)
197 (5000)
217 (5500)
236 (6000)
106.7 (2710)
116.5 (2960)
126.4 (3210)
140.2 (3560)
153.9 (3910)
167.7 (4260)
177.6 (4510)
171.3 (4350)
190.9 (4850)
210.6 (5350)
230.3 (5850)
250.0 (6350)
269.7 (6850)
289.4 (7350)
8,000
18,000
16,000
7,000
14,000
12,000
10,000
17,640 (8000)
6,000
5,000
4,000
3,000
8.7 (220)
12°
8,000
16,980 (7700)
16,530 (7500)
600 800
1200
1600
2000
LOAD CENTER (mm)
D80-8 2-STAGE FULL FREE VIEW MAST***
Note: Capacities shown are for trucks equipped with
2-stage view mast up through 197in. (5000mm) maxi-
mum fork height, 66.9in. (1700mm) carriage,
48in. (1220mm) forks.
Contact your distributor or dealer for capacity
information with other equipment.
118 (3000)
130 (3300)
138 (3500)
157 (4000)
106.5 (2705)
112.4 (2855)
116.3 (2955)
126.2 (3205)
164.6 (4180)
176.4 (4480)
184.3 (4680)
203.9 (5180)
63.1 (1605)
69.1 (1755)
73.0 (1855)
82.9 (2105)
17,420 (7900)
10°
D80-8 3-STAGE FULL FREE VIEW MAST***
157 (4000)
169 (4300)
177 (4500)
197 (5000)
217 (5500)
236 (6000)
102.6 (2605)
106.5 (2705)
108.5 (2755)
116.3 (2955)
124.2 (3155)
132.1(3355)
209.3 (5315)
221.1 (5615)
228.9 (5815)
248.6 (6315)
268.3 (6815)
288.0 (7315)
55.1 (1400)
59.1 (1500)
61.0 (1550)
68.9 (1750)
76.8 (1950)
84.6 (2150)
15,870 (7200)
6°
15,400 (7000)
14,330 (6500)
13,010 (5900)
Note: Standard mast is shown in broad frame.
*Load capacity at 24in. (600mm) load center.
**50.4 in. (1280mm) height load backrest.
***Free lift and Overall height (Extended)
shown are for truck without load backrest.
FEATURES AND EQUIPMENT
SPECIAL FEATURES
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
• Warning Devices – Audible
• Warning Devices – Visual
• Rear View Mirrors
•
The NissanTB45E LPG/Gas and Komatsu
S6D102E diesel industrial engines deliver
exceptional power, emission control, and
reliable operation for enhanced productivity
and fuel efficiency.
• Dash Display – Fuel, Water Temperature,
Torque Converter oil temperature and
Hour Meter Gauges
• Drawbar Pin
• Additional Length Forks
• Attachments
• Electronic Ignition; Anti-Restart
Ignition Switch
•
•
Full floating operator compartment (HSC)
greatly reduces operator fatigue by isolating
the compartment from engine and traveling
vibrations.
• Auxiliary Hydraulic Valve
• Internal Hydraulic Hosing
• Engine Oil Pressure and Charge
Warning Lamps
• Fully Hydrostatic Power Steering
• Headlights – OHG Mounted
• High Air Intake in OHG
• Horn
Swing up engine cover, lift out floor plate
and radiator cover provide quick access
for daily checks and maintenance.
• Wide slip resistant steps and assist hand
grip makes entry and exit easier.
• Deluxe full suspension vinyl seat and
Operator Restraint System with Lap Belts
• Dash display provides easy to read
information to the operator and
maintenance personnel.
• Load Backrest
• Overhead Guard
• Sedimeter warning light (Diesel Units)
• Tilting Steering Column
• Torque Converter Oil Cooler
• Turn Signal, Back-up, Stop and Tail Lights
TECHNICAL DATA
FUEL SYSTEM
FRAME
ENGINE
Gasoline, LPG, or dual-fuel system. Integral
fuel (gasoline or diesel) tank.
All welded assembly of heavy gauge steel
with integral hydraulic and fuel tanks.
TB45E 6 cylinder in-line, 4.5 liter with ECCS
(Engine Concentrated Control System)
engine to meet the next generation of low
emission standards. This new low RPM high
torque industrial engine offers a higher
level of engineering excellence through
exceptional emission controls, acceleration,
performance, reliability, and serviceability.
• Liquid propane gasoline (LPG) fuel is
available with (optional) 33 lb. or 43 lb. tank.
• Flange type drive axle mounting and heavy
duty engine mounts improve product
reliability.
COOLING SYSTEM
BRAKES
Large capacity, highly efficient aluminum
radiator
• Easy access reservoir tank for checking or
adding coolant.
Hydraulic assisted service brakes with master
cylinder booster are self-adjusting and self-
centering.
• Three choices: gasoline with multi-port
fuel injection, or LPG with single-port
(throttle body) fuel injection, or a dual-
fuel operation easily switching between
fuels with the flip of a switch. All trucks are
equipped with a 3-way catalytic converter.
• Plastic bladed cooling fan with unequal
pitched blades for additional noise reduction
and efficiency.
• High friction, large diameter brake linings
are housed in the drive axle.
• Enlarged brake covers prevent dirt and
water from entering the linings.
• All engines utilize an ECCS that
continuously monitors engine component
data from the accelerator pedal, throttle
position, mass-air-flow, water temperature,
fuel pressure, and heated oxygen
sensor, for increased sensitivity, reliable
cold starts, and smooth performance
throughout the operating range. An
electronic governor is used for rev-limit
protection.
ELECTRICAL SYSTEM
• Mechanical parking brake is actuated from
adjustable toggle handle on dash allowing
for more legroom in the operator’s
compartment.
Standard operator conveniences that are
optional on most, such as a complete light
package, horn and hour meter, are standard
on Hamech.
• 12-volt electrical system.
STEER AXLE
• Alternator with built in I.C. regulator.
Standard on demand, Fully Hydrostatic
Power Steering.
• Key-lock, anti-restart ignition switch
(Gas/LPG only).
MAST, CARRIAGE, LBR & FORKS
• Temperature sensor prevents overheating
during high temperature operation by
automatically limiting engine speed until
the coolant temperature returns to within
normal operating range, if the coolant
temperature exceeds a specific
temperature, the engine will shut down
automatically. When the engine exceeds
normal operating temperature a dash
displayed warning light is also illuminated.
• Dash displayed fuel level and water
temperature gauges.
High-visibility mast assembly with 4 or 6-roller
carriage available in 2-Stage Free-View and
2-Stage or 3-Stage Full Free-View type.
• Warning lights for engine oil pressure,
battery charging, brake fluid level, ECCS
monitor and operation fault indicator.
• Sealed bearings for reduced maintenance
with standard side thrust rollers on carriage.
• ECCS – SST (Service Support Tool)
connector interface for rapid engine
diagnostics.
• Equipped with ITA Class IV carriage bars for
mounting forks or a variety off load handling
attachments.
• Electrically controlled forward-reverse lever
operates at the touch of a finger.
• 48-inch load backrest is standard for
increased load control and operator safety.
• Aluminum-alloy head for efficient cooling.
• Additionally, the low noise level provides
comfort to the operator while driving the
truck. S6D102E diesel 6 cylinder in-line,
5.9 liter 4 stroke cycle turbo-charged direct
injection timed engine that produces high
performance and excellent fuel economy.
The Komatsu S6D102E diesel engine
delivers the power and efficiency to get
the job done quickly and cost-effectively
while meeting emission requirements.
HYDRAULIC SYSTEM
• Single and double function internal hosing is
available for operating attachments.
The hydraulic system features an integral
reservoir, rebuildable direct drive gear pump,
and fully filtered system.
• Large capacity reservoir and radiator cooling
keeps the hydraulic fluid at an efficient
operating temperature.
• Load sensing valve in the hydraulic circuit
halts the flow of oil to the power steering
system when steering wheel is idle.
• The starting system of quick glow spark
(QGS) ensures a quicker and reliable start
in all climate conditions.
TECHNICAL DATA
OPERATOR COMPARTMENT
• Separate inching and braking pedals
provide positive control while reducing wear
on the drive train.
COMPLIANCE & APPROVALS
A unique full-floating operator compartment
(HSC) designed to isolate the operator from
fatigue producing vibration.
Meets or exceeds American National
Standards Institute, ASME B56.1 – Part III
Safety Standards for Powered Industrial Trucks.
• Trucks come standard with an integral
headlight/turn indicator control. Turn
indicator has automatic return to neutral.
• Deluxe full suspension seat with retractable
seat belt, lateral restraint system, and
adjustable seat travel and reclining is
standard.
Compliant with UL 558 for the appropriate
truck type. Contact your authorized dealer for
application specifics. Meets or Exceeds EPA
emissions standards
• The overhead guard is full width and offers
excellent visibility for stacking high loads.
• Hydraulic control levers have easy-to-read
international symbols on the contoured
grips and are within easy reach of the
operator.
SERVICEABILITY
Excellent access to engine compartment,
transmission, and radiator areas can be
achieved without tools. Making daily checks
and maintenance easier.
• Tilting steering console positions instrument
panel in full view of operator at all times.
• The gas cylinder-assisted, one-piece all
metal engine compartment cover lifts easily
and is insulated to reduce noise and heat.
• Floor mounted automotive-type pedals with
large ribbed pads for comfort and safe
operation.
• Cover also features a single latch for locking
down and an open cover catch to prevent
cover from coming down while in open
position.
• Full width floor mat provides large non-slip
surface, reduces noise, vibration, and heat.
• Large open steps and convenient assist
handgrip provides easy entry and exit for
the operator.
• Bottom corner of cover is angled to allow
more access into engine compartment for
scheduled maintenance and service.
Expect solid
support nationwide
In addition, you can count
on Hamech for operator and
service technician training,
flexible maintenance programs,
fleet management and
financial services. Hamech’s
association with Crown also
assures you of access to
industry-leading electric lift
trucks for complete
Hamech, a brand of Crown
Equipment Corporation,
offers a comprehensive
service support network for
Hamech LPG, gas or diesel
lift trucks.
You can expect ongoing
value with the comprehensive
services available from your
Hamech dealer. See it for
yourself in state-of-the-art
facilities stocked with
application flexibility.
Visit hamech.com for more
information on the full line of
Hamech IC lift trucks.
products and parts
inventories, advanced
processes, equipment and
tools. It’s also apparent in
the professionally trained
service technicians and
well-stocked service vans.
Hamech Lift Trucks
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Hamech is a brand of Crown Equipment Corporation.
Because Hamech is continually improving its
products, specifications are subject to change
without notice.
Fax 419-629-3796
Hamech and the Hamech logo are trademarks
of Crown Equipment Corporation.
Copyright 2008 Crown Equipment Corporation
SF14900 03/08
Printed in U.S.A.
|