Installation Instructions
Sheet 1 of 3
Large, OUTDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault
C-Scroll
Roundel
These installation instructions are valid with the above Ametrix styles.
Securing pendant to ceiling
Exploded view and part call-out
1
3/8" fasteners
(by others)
J-box
(by others)
Canopy
#8-32 x3/8"
Set screw
(2x)
1/4-20 x4"
Hex bolt
(2x)
#8-32 x3/8"
Set screw
(2x)
Cover plate
(2x)
Canopy
Cover plate
1/4-20 x4
Hex bolts
(2x)
Fixture head
assembly
1. Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2. Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J-box into pendant, ensure there is enough
wire to reach cover plate.
4. Using appropriate fasteners, secure fixture to ceiling. Use
additional bracing if necessary.
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
5. Replace canopy and secure using both set screws.
2
Wiring the fixture
Sealing the fixture
3
1/4-20 x4
Hex bolts
(2x)
#8-32 x1/2"
Socket cap screws
(2x)
Cover plate
Cover plate
gasket
(2x)
#8-32 x5/8"
Socket cap screws
(3x)
Wire seal
1. To seal fixture, ensure door is secured with provided socket
cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.
2. Secure #6-32 x5/8" socket cap screws into bottom of door.
3. Refer to supplementary sheets for torque specs and aiming
instructions.
1. Slide fixture assembly onto pendant and secure with both
1/4-20 x4 hex bolts.
2. Attach appropriate wires and ensure all connections are
properly matched
3. Secure cover plate
ADY071474 REV A(ECN070347)
Installation Instructions
Sheet 3 of 3
Large, OUTDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Warning: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Vault w/ visor
C-Scroll w/ visor
Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Lamping Size Chart
(lamps provided by others)
FIXTURE SIZE
# OF
Lamp
(inches/ mm) WATTAGE LAMPS LAMP TYPE LAMP DESCRIPTION (not to scale)
16
16
16
/ 419.1
/ 419.1
/ 419.1
32 W
42 W
57 W
1
1
1
T4
T4
T4
Compact Flourescent
Compact Flourescent
Compact Flourescent
1/2
1/2
1/2
16
16
16
/ 419.1
/ 419.1
/ 419.1
100 W
150 W
175 W
1
1
1
ED17
T6
Ceramic Metal Halide
Ceramic Metal Halide
Ceramic Metal Halide
1/2
1/2
1/2
ED17
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
22
22
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
32 W
42 W
2
2
T4
T4
Compact Flourescent
Compact Flourescent
1/2
1/2
22
22
22
/571.5 mm
/571.5 mm
/571.5 mm
250 W
400 W
150 W
1
1
2
ET18
ET18
T6
Metal Halide
Metal Halide
1/2
1/2
1/2
Ceramic Metal Halide
22
22
/571.5 mm
/571.5 mm
350 W
500 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
1
1
1
1
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
30
30
30
30
30
/ 774.7
/ 774.7
/ 774.7
/ 774.7
36 W
40 W
50 W
55 W
2
2
2
2
T5
T5
T5
T5
Twin Tube
Twin Tube
Twin Tube
Twin Tube
1/2
1/2
1/2
1/2
30
30
/ 774.7
/ 774.7
250 W
400 W
2
2
ET18
ET18
Metal Halide
Metal Halide
1/2
1/2
30
30
/ 774.7
/ 774.7
900 W
1
1
T3
T3
Halogen(Double Ended)
Halogen(Double Ended)
1/2
1/2
1000 W
ADY071474 REV A(ECN070347)
|