Clarion CD Player DXZ665MP User Manual

Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
DXZ665MP  
CD/MP3/WMA RECEIVER/CeNET CONTROL  
RÉCEPTEUR CD/MP3/WMA : COMMANDE CeNET  
RECEPTOR Y REPRODUCTOR DE CD/MP3/WMA/  
CONTROL DE CeNET  
 
Thank you for purchasing this Clarion product.  
Please read this owner’s manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
This manual includes the operating procedures of the iPod interface, CD changer, Satellite Radio  
Receiver and TV tuner connected via the CeNET cable. The iPod interface, CD changer and TV  
tuner have their own manuals, but no explanations for operating them are described.  
Contents  
1. FEATURES...................................................................................................................................... 2  
2. PRECAUTIONS .............................................................................................................................. 3  
Motorized Face ................................................................................................................................ 4  
Handling Compact Discs ................................................................................................................. 4  
3. CONTROLS .................................................................................................................................... 5  
4. NOMENCLATURE .......................................................................................................................... 6  
Names of the Buttons and their Functions ...................................................................................... 6  
Major Button Operations When External Equipment is Connected to This Unit .............................. 7  
Display Items ................................................................................................................................... 9  
5. DCP ................................................................................................................................................11  
6. REMOTE CONTROL..................................................................................................................... 12  
Inserting the Battery ...................................................................................................................... 12  
Functions of Remote Control Unit Buttons .................................................................................... 13  
7. OPERATIONS ............................................................................................................................... 14  
Basic Operations ........................................................................................................................... 14  
Radio Operations ........................................................................................................................... 16  
CD/MP3/WMA Operations ............................................................................................................. 18  
Operations Common to Each Mode .............................................................................................. 21  
8. OPERATIONS OF ACCESSORIES .............................................................................................. 26  
CD Changer Operations ................................................................................................................ 26  
TV Operations ............................................................................................................................... 27  
9. IN CASE OF DIFFICULTY ............................................................................................................ 28  
10. ERROR DISPLAYS ....................................................................................................................... 29  
11. SPECIFICATIONS ......................................................................................................................... 30  
1. FEATURES  
• Full dot VF display & 728-variable color illuminated key  
• Motorized Detachable Faceplate & Smart Control Operation  
• “Z-ENHANCER” sound customisation & “MAGNA BASS EX” dynamic bass enhancement  
2
DXZ665MDP ownload from Www.Somanuals.com. All Manuals Search And Download.  
2. PRECAUTIONS  
1. When the inside of the car is very cold and the  
player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper playback  
may not be possible. If moisture forms on the  
disc, wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do not  
use the player for about one hour. The  
condensation will disappear naturally allowing  
normal operation.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
3. This unit uses a precision mechanism. Even  
in the event that trouble arises, never open  
the case, disassemble the unit, or lubricate  
the rotating parts.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules.  
CAUTION  
USE OF CONTROLS, ADJUSTMENTS, OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN, MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation.  
This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation.  
THE COMPACT DISC PLAYER SHOULD NOT  
BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE  
PERSONNEL.  
CHANGES OR MODIFICATIONS NOT  
EXPRESSLY APPROVED BY THE  
MANUFACTURER FOR COMPLIANCE COULD  
VOID THE USER’S AUTHORITY TO OPERATE  
THE EQUIPMENT.  
If this equipment does cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to consult the dealer or  
an experienced radio/TV technician for help.  
INFORMATION FOR USERS:.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY AND WILL VIOLATE FCC  
APPROVAL.  
Bottom View of Source Unit  
DXZ665MP  
3
Motorized Face  
This unit uses motorized face to make large-screen displays possible.  
When you use the motorized face, be sure to close it.  
3. If you move the MOTORIZED FACE by hand,  
CAUTION  
BE CAREFUL NOT TO GET YOUR FINGERS  
CAUGHT WHEN OPENING AND CLOSING  
THE MOTORIZED FACE.  
this may create play. To correct this play, with  
the power on for the unit, press the [Q]  
button to close the MOTORIZED FACE.  
4. After a disc is ejected, the MOTORIZED  
FACE automatically returns to the tilted or  
closed state. If there is any obstruction when  
the MOTORIZED FACE tries to close, the  
safety mechanism is triggered and the  
MOTORIZED FACE returns to the open state.  
If this happens, remove the obstruction, then  
press the [Q] button.  
1. For safety’s sake, always close the  
MOTORIZED FACE before leaving this unit  
unused for a prolonged period or switching  
OFF the ignition key.  
If you switch OFF the ignition key with the  
MOTORIZED FACE tilted, the MOTORIZED  
FACE does not close.  
5. To avoid scratching the compact disk, keep  
the 12 or 8 cm CD level when inserting or  
removing them.  
2. Before the MOTORIZED FACE closes, there  
may be a braking sound from the safety  
mechanism. This is normal.  
Handling Compact Discs  
Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use of  
such discs may cause misoperation or damage.  
Use only compact discs bearing the  
mark.  
or  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
To remove a compact disc from its storage case,  
press down on the center of the case and lift the  
disc out, holding it carefully by the edges.  
Some CDs recorded in CD-R/CD-RW mode  
may not be usable.  
• Do not use commercially available CD  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc or  
cause breakdown of the internal mechanism.  
Handling  
Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played. Therefore,  
do not leave them for a long time in the car.  
Storage  
• Do not expose compact discs to direct sunlight  
or any heat source.  
• Do not expose compact discs to excess  
humidity or dust.  
• Do not expose compact discs to direct heat  
from heaters.  
• New discs may have some roughness around  
the edges. If such  
discs are used, the  
Ball-point pen  
player may not work  
or the sound may  
Roughness  
Cleaning  
skip. Use a ball-point  
pen or the like to  
remove any  
roughness from the  
edge of the disc.  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the center  
of the compact disc to the circumference.  
• Do not use any solvents, such as commercially  
available cleaners, anti-static spray, or thinner  
to clean compact discs.  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
• Never play a compact disc with any  
cellophane tape or other glue on it or with  
peeling off marks. If you try to play such a  
compact disc, you may not be able to get it  
back out of the CD player or it may damage  
the CD player.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente.  
DXZ665MP  
4
 
3.CONTROLS / LES COMMANDES / CONTROLES  
Source unit / Appareil pilote / Unidad fuente  
[ ]  
ROTARY  
[
]
ADJ  
[
]
[
]
[
[
]
RELEASE  
,
[ ]  
C
]
[ ]  
Z
[
]
[ ]  
T
A-M  
[
]
[
ISR  
[ ]  
D
]
SRC  
[
]
SENSOR  
[
]
DIRECT  
[
]
SCN  
[
]
BND  
[
]
RPT  
[
], [ ]  
UP DN  
[
]
RDM  
With the MOTORIZED FACE opened / Ouvrez la FACE MOTORISÉE  
Apertura del FRONTAL MOTORIZADO  
[
]
CD SLOT  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
5
DXZ665MP  
 
4. NOMENCLATURE  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).  
Names of the Buttons and Their Functions  
[RELEASE] button  
• Deeply push in the button to unlock the DCP.  
• Play a first track while in the CD/MP3/WMA  
mode.  
• Press the button to change the character.  
[ADJ] button  
• Press the button to enter the adjust mode.  
[UP], [DN] buttons  
• Select the folder while in the MP3/WMA mode.  
[DIRECT] buttons  
• Store a station into memory or recall it directly  
while in the radio mode.  
[ROTARY] knob  
• Adjust the volume by turning the knob  
clockwise or counterclockwise.  
• Use the knob to perform various settings.  
[RDM] button  
[
] button  
• Perform random play while in the CD/MP3/  
WMA mode.  
• Perform preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed.  
• Press and hold the button for 1 second or  
longer to perform folder random play while in  
the MP3/WMA mode.  
• Play or pause a CD while in the CD/MP3/  
WMA mode.  
• Corfirm various settings.  
[RPT] button  
• Perform repeat play while in the CD/MP3/  
WMA mode.  
• Press and hold the button for 1 second or  
longer to perform folder repeat play while in  
the MP3/WMA mode.  
[Q] button  
• Press to open the MOTORIZED FACE and  
insert a CD into the CD SLOT.  
• Press to eject a CD loaded in the unit.  
[C] button  
[SCN] button  
• Button’s color change to multicolor.  
• Press and hold the button for 1 second or  
longer to go into the user color adjustment.  
• Perform scan play for 10 seconds of each  
track while in the CD/MP3/WMA mode.  
• Press and hold the button for 1 second or  
longer to perform folder scan play while in the  
MP3/WMA mode.  
[Z] button  
Use the button to select one of the 3 types of  
sound characteristics already stored in memory.  
[SRC] button  
[T] button  
• Use the button to input a title in the radio, CD  
mode.  
• Use the button to switch the user titles or  
track titles, while in the CD/MP3/WMA mode.  
• Use the button to scroll the title during the CD-  
text play, while in the CD/MP3/WMA mode.  
• Press the button to turn on the power.  
Press and hold the button for 1 second or  
longer to turn off the power.  
• Switch the operation mode among the radio  
mode, etc.  
[ISR] button  
• Recall ISR radio station in memory.  
[D] button  
Press and hold for 2 seconds or longer: Store  
current station into ISR memory (radio mode only).  
• Switch the display indication (Main display,  
spectrum analyzer display and Clock  
display).  
[A-M] button  
• Use the button to switch to the audio mode  
(bass, treble, balance, fader).  
• Press and hold for 1 second or longer to turn  
on or off the MAGNA BASS EXTEND mode.  
• Press and hold the button for 1 second or  
longer (do not over 4 seconds) to enter the  
display adjust mode.  
• Press and hold the button for 4 seconds or  
longer to turn off the display while in the  
usual play, ISR mode, telephone interrupt.  
[å, ] lever  
Selects a station while in the radio mode or  
selects a track while in the CD/MP3/WMA  
mode. This lever is used to make various  
settings.  
[SENSOR]  
• Receiver for remote control unit.  
(Operating range: 30° in all directions.)  
[BND] button  
• Switch the band, or seek tuning or manual  
tuning while in the radio mode.  
Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
[CD SLOT]  
 
6
DXZ665MP  
• CD insertion slot.  
Major Button Operations When External Equipment is  
Connected to This Unit  
[
] button  
When the CD/DVD changer/  
• Play or pause a CD, DVD or iPod BB.  
iPod interface is connected  
For details, see the section “CD Changer  
Operations”. For the DVD changer, refer  
to the Owner’s Manual provided with the  
DVD changer.  
[T] button  
• Press the button, switches the user titles or  
track titles, etc. while in the CD changer  
mode.  
For the iPod interface, refer to the Owner’s  
Manual provided with the iPod interface.  
Hereinafter, “iPod interface” is abbreviated  
as iPod BB.  
• Use the button to input a title in the CD  
changer mode.  
• Use the button to scroll the title during CD-  
text play.  
[BND] button  
• Move the next disc in increasing order.  
Regarding iPod BB (EA-1251B)  
The iPod BB allows connection of an iPod  
that can then be operated in the same way  
as a 6 disc CD changer.  
[UP], [DN] buttons  
• Select the disc.  
[RDM] button  
• Perform random play. Also perform disc  
random play when the button is pressed and  
held.  
• When an iPod is connected to the iPod  
BB, subsequent operations are as  
performed from the main unit.  
[RPT] button  
• Perform repeat play. When this button is  
pressed and held, disc repeat play is performed.  
• Not all iPod functions can be controlled  
from the main unit.  
• iPod models usable with the iPod BB  
include models supporting the following  
software versions:  
[SCN] button  
• Perform scan play for 10 seconds of each  
track. Disc scan play is performed when the  
button is pressed and held.  
… iPod 3rd generation software Ver. 2.2  
or later.  
[å, ] lever  
… iPod 4th generation software Ver. 3.0.1  
or later.  
• Select a track when listening to a disc.  
• Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
… iPod mini software Ver. 1.2 or later.  
… iPod photo (images cannot be  
displayed).  
* See your iPod Owner’s manual regarding  
what software version is supported by  
your iPod.  
Notes:  
• Scan play cannot be performed with the iPod  
BB.  
• In order to operate the iPod like a 6-disc CD  
changer, a playlist must be constructed  
beforehand.  
• When connecting the iPod BB and CD  
changer, set the address switch on the side  
of the CD changer to “2”.  
• For other precautions, consult the iPod BB  
Owner’s manual.  
• “iPod” is a trademark of Apple Computer,  
Inc., registered in the U.S. and other  
countries.  
DXZ665MP  
7
 
Major Button Operations When External Equipment is Connected to This Unit  
When the TV is connected  
When the Satellite Radio  
For details, see the section “TV Operations”.  
receiver is connected  
For details, refer to the Owner’s Manual  
provided with the Satellite Radio receiver.  
[ADJ] button  
• Press and hold the button for 1 second or  
longer to switch to the TV picture mode or  
VTR (external) picture mode.  
[DIRECT] buttons  
• Stores a station into memory or recall it  
directly.  
[
] button  
• Perform preset scan while in the TV mode.  
When the button is pressed and held, auto  
store is performed.  
[SRC] button  
• Press the button to switch the operation  
mode.  
[BND] button  
[ISR] button  
• Switch the band.  
• Select the CAT (Category).  
• When the button is pressed and held, switch  
seek tuning or manual mode.  
[å, ] lever  
• Select a station.  
[DIRECT] buttons  
• Store a station into memory or recall it  
directly.  
[å, ] lever  
• Select a station.  
8
DXZ665MP  
 
Display Items  
Background indication  
• Motion image (1 pattern), wallpaper (5 patterns) (Page 21)  
• Demo mode with screen saver (Page 22)  
Operation status indication  
Titles, Spectrum analyzer,  
clock time are displayed.  
Displayed when changing  
source  
MB  
Z3  
: MAGNA BASS EXTEND indication  
: Z-ENHANCER 1,2,3  
ST  
: ST (radio only), MP3, WMA indication  
MANU : Manual indication  
TUNER : radio mode  
SIRIUS  
XM  
: Satellite radio mode  
CD/MP3 : CD/MP3 mode  
CD A/C1 : CD changer (iPod BB)  
mode  
* When connecting iPod  
BB.  
CD A/C1 : CD changer mode  
(2, 3, 4)  
DVD A/C : DVD changer mode  
TV  
: TV mode  
VTR  
AUX  
: VTR mode  
: AUX mode  
ACCESORY : accesory mode  
TELEPHONE : telephone mode  
DXZ665MP  
9
 
Display Items  
Displays icon corresponding  
to playback or selection.  
Operation status indication  
Band / disc No. /  
folder No. indication  
Preset channel /  
track No. indication  
Receiving frequency or  
channel / play time indication  
Items within parentheses ( ) are displayed during  
operation as the “Operation status indication”.  
Displayed when changing titles  
U
USER  
: Radio / TV user title  
: CD user title  
P.SCAN (PRESET SCN) : Preset scan  
• AS (AUTO STORE)  
: Auto store  
DISC  
: CD-TEXT disc title  
: CD-TEXT artist title  
: CD-TEXT track title  
• C.SCAN (CAT SCAN)  
: Category scan  
A
ARTIST  
TRACK  
• SCAN (TRACK SCAN) : Track scan  
• RPT (TRACK RPT)  
• RDM (TRACK RDM)  
: Track repeat  
: Track random  
FOLDER : MP3 folder name  
TRACK  
ALBUM  
ARTIST  
TITLE  
: MP3 file name  
: MP3 album tag  
: MP3 artist tag  
: MP3 title tag  
• D.SCAN (DISC SCAN) : Disc scan  
• D.RPT (DISC RPT)  
• D.RDM (DISC RDM)  
: Disc repeat  
: Disc random  
A
T
• SCAN (CHAPTER SCN) : Chapter scan  
• RPT (CHAPTER RPT) : Chapter repeat  
Example of spectrum analyzer  
display (Page 22)  
T.RPT (TITLE RPT)  
: DVD title repeat  
F.SCAN (FOLDER SCN) : Folder scan  
F.RPT (FOLDER RPT) : Folder repeat  
F.RDM (FOLDER RDM) : Folder random  
Spectrum analyzer display-1  
Spectrum analyzer display-2  
10  
DXZ665MP  
 
5. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
Attaching the DCP  
1. Insert the DCP so that the A section on the  
right side of the DCP catches on the hook B  
on the unit.  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
1. With the MOTORIZED FACE closed, turn off  
the power.  
2. Press the [RELEASE] button deeply to open  
the DCP.  
[RELEASE] button  
2. Press the left side C of the DCP carefully to  
fit it in place.  
3. Pull the DCP toward you and remove it.  
CAUTION  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not to  
drop it or subject it to strong shocks.  
• If the [RELEASE] button is pressed and the  
DCP is not locked into place, it may fall out  
from vibration of the car. This can break  
the DCP, so after removing it, either install  
it on the unit or put it in its DCP case.  
DCP  
• The connector connecting the unit and the  
DCP is an extremely important part. Be  
careful not to damage it by pressing on it  
with fingernails, screwdrivers, etc.  
CAUTION  
• Always close the MOTORIZED FACE  
before removing the DCP.  
• If you remove the DCP with the  
MOTORIZED FACE open, the MOTORIZED  
FACE closes immediately. Be careful not to  
get your fingers caught.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DXZ665MP  
11  
 
6. REMOTE CONTROL  
Signal transmitter  
[
]
]
[
[
]
SRC  
BND  
]
[
[
], [  
[
[
], [  
]
]
]
]
MUTE  
DISP  
[
ISR  
[
[
]
RDM  
]
RPT  
[
]
SCN  
Inserting the Battery  
1 Turn over the remote control unit and slide the cover  
in the direction indicated by the arrow in the  
illustration.  
2 Insert the battery (CR2025) into the insertion guides,  
with the printed side (+) facing upwards.  
3 Press the battery in the direction indicated by the  
arrow so that it slides into the compartment.  
4 Replace the cover and slide in until it clicks into place.  
Notes:  
Insertion guide  
Misuse may result in rupture of the battery, producing  
leakage of fluid and resulting in personal injury or  
damage to surrounding materials. Always follow these  
safety precautions:  
R
• Use only the designated battery.  
• When replacing the battery, insert properly, with +/–  
polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or  
water. Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
12  
DXZ665MP  
 
Functions of Remote Control Unit Buttons  
CD changer  
(iPod BB)  
DVD changer  
Mode  
Button  
Radio/Satellite  
CD/MP3/WMA  
TV  
Switches among radio, Satellite Radio Receiver, CD/MP3/WMA, iPod BB, CD changer, DVD  
changer, TV and AUX.  
[SRC]  
Plays the first track.  
Top play.  
Moves the next disc  
in increasing order.  
Switches reception  
band.  
Switches reception  
band.  
[BND]  
Increases and decreases volume (in all modes).  
[
] , [  
] , [  
]
Moves preset  
channels up and  
down.  
Moves tracks up and down.  
When pressed and held for 1 second:  
Fast-forward/fast-backward.  
Moves preset  
channels up and  
down.  
[
]
No function.  
Switches between playback and pause.  
No function.  
[
]
Turns mute on and off.  
[MUTE]  
[ISR]  
Recalls ISR radio station in memory.  
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only).  
[DISP]  
[SCN]  
Switches among main display, spectrum analyzer display and clock time display.  
When pressed and held for 1 second or longer: Switches the titles (except in the radio, DVD  
changer, TV mode).  
Scan play.  
Preset scan.  
Preset scan.  
Scan play.  
Press and hold the  
button for 1 second  
or longer to perform  
folder scan play while  
in the MP3/WMA  
mode.  
When pressed and  
held for 2 seconds:  
Auto store.  
When pressed and  
held for 2 seconds:  
Auto store.  
When pressed and  
held for 1 second:  
Disc scan play.  
* Cannot operate via  
iPod BB.  
Repeat play.  
No function.  
No function.  
No function.  
Repeat play.  
[RPT]  
Press and hold the  
button for 1 second  
or longer to perform  
folder Repeat play  
while in the  
When pressed and  
held for 1 second:  
Disc repeat play.  
MP3/WMA mode.  
Random play.  
Switches between TV  
and VTR.  
Random play.  
[RDM]  
Press and hold the  
button for 1 second  
or longer to perform  
folder Random play  
while in the  
When pressed and  
held for 1 second:  
Disc random play.  
MP3/WMA mode.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
DXZ665MP  
13  
 
7. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter “3. CONTROLS” on page 5 (unfold).  
Adjusting the volume  
CAUTION  
1. Press the front part of the [ROTARY] knob.  
The knob will pop up.  
Be sure to lower the volume before  
switching off the unit power or the ignition  
key. The unit remembers its last volume  
setting. If you switch the power off with the  
volume up, when you switch the power back  
on, the sudden loud volume may hurt your  
hearing and damage the unit.  
2. Turning the [ROTARY] knob clockwise  
increases the volume; turning it  
counterclockwise decreases the volume.  
The volume level is from 0 (minimum) to 33  
(maximum).  
Switching the display  
Press the [D] button to select the desired  
display.  
Turning on/off the power  
Note:  
• Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
When the power is turned on  
Press and hold the [D] button for 4 seconds or longer  
to turn off the display while in the usual play, ISR  
mode, telephone interrupt. And press the button to  
return to the previous mode.  
1. Press the [SRC] button.  
Each time you press the [D] button, the display  
switches in the following order:  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
• Main display  
3. Press and hold the [SRC] button for 1  
second or longer to turn off the power for the  
unit.  
Note:  
• System check  
• Spectrum analyzer display  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, the “SYSTEM CHECK” appears in the  
display, then the unit returns to the clock display  
mode. The system check starts within the unit.  
When the system check is complete, press the  
[SRC] button again.  
• Clock time display  
Selecting a mode  
1. Press the [SRC] button to change the  
operation mode.  
2. Each time you press the [SRC] button, the  
operation mode changes in the following  
order:  
Once selected, the preferred display becomes  
the display default. When a function adjustment  
such as volume is made, the screen will  
momentarily switch to that function’s display,  
then revert back to the preferred display  
several seconds after the adjustment.  
Radio mode Satellite mode CD/MP3/  
WMA mode CD changer (iPod BB) mode  
CD changer mode DVD changer mode  
TV mode AUX mode Radio mode...  
External equipment not connected with  
CeNET is not displayed.  
If the button operation is performed with the  
screen saver function on, the operation  
display corresponding to the button operation  
is shown for about 30 seconds and the display  
returns to the screen saver display.  
14  
DXZ665MP  
 
Basic Operations  
For details, refer to the subsection “Turning the  
screen saver function on or off” in section  
Operations Common to Each Mode.”  
Adjusting the bass  
The bass gain can be adjusted as follows.  
1. Press the [A-M] button and select “BASS 0”.  
When the power is turned off  
2. Turn the [ROTARY] knob to adjust the gain,  
–6 to 7 (The factory default setting is “0”).  
1. Each time you press the [D] button, the clock  
time appears or disappears in the display.  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
Setting the Z-Enhancer  
This unit are provided with 3 types of sound  
tone effects stored in memory. Select the one  
you prefer.  
Adjusting the treble  
The treble gain can be adjusted as follows.  
The factory default setting is “OFF”.  
1. Press the [A-M] button and select “TREB 0”.  
Each time you press the [Z] button, the tone  
2. Turn the [ROTARY] knob to adjust the gain,  
–6 to 6 (The factory default setting is “0”).  
effect changes in the following order:  
“OFF” “BASS BOOST” “IMPACT” ➜  
“EXCITE” “OFF” ...  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
BASS BOOST : bass emphasized  
IMPACT  
EXCITE  
: bass and treble emphasized  
: bass and treble emphasized  
mid deemphasized  
Adjusting the balance  
1. Press the [A-M] button and select  
BALANCE 0”.  
OFF  
: no sound effect  
2. Turning the [ROTARY] knob clockwise  
emphasizes the sound from the right  
speaker; turning it counterclockwise  
Adjusting the tone  
Press the [A-M] button and select the item to  
adjust. Each time you press the [A-M] button,  
the item changes as following order:  
emphasizes the sound from the left speaker.  
The factory default setting is “0”. (Adjustment  
When “BASS BOOST” is set  
range: L13 to R13)  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
“BALANCE 0” “FADER 0” Last  
function mode.  
When “IMPACT” is set  
“BALANCE 0” “FADER 0” Last  
function mode.  
Adjusting the fader  
1. Press the [A-M] button and select “FADER 0”.  
When “EXCITE” is set  
“BALANCE 0” “FADER 0” Last  
function mode.  
2. Turning the [ROTARY] knob clockwise  
emphasizes the sound from the front  
speakers; turning it counterclockwise  
emphasizes the sound from the rear  
speakers.  
When “OFF” is set  
“BASS 0” “TREB 0” “BALANCE 0” ➜  
“FADER 0” “Last function mode.  
The factory default setting is “0”. (Adjustment  
range: F12 to R12)  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
Note:  
• During A-M adjustment mode, if no operation is  
performed for more than 7 seconds, this mode  
can be cancelled and return to previous mode.  
DXZ665MP  
15  
 
Basic Operations  
Radio Operations  
Adjusting MAGNA BASS EXTEND  
The MAGNA BASS EXTEND does not adjust  
the low sound area like the normal sound  
adjustment function, but emphasizes the deep  
bass sound area to provide you with a dynamic  
sound.  
Listening to the radio  
1. Press the [SRC] button and select the radio  
mode. The frequency appears in the display.  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the  
following order:  
The factory default setting is off.  
1. Press and hold the [A-M] button for 1  
second or longer to turn on the MAGNA  
BASS EXTEND effect. “M-BASS ON”  
appears in the display.  
F1 (FM1) F2 (FM2) F3 (FM3) A (AM)  
F1 (FM1)...  
3. Press the [å, ] lever upward or  
downward to tune in the desired station.  
2. Press and hold the [A-M] button for 1 second  
or longer to turn off the MAGNA BASS  
EXTEND effect. “M-BASS OFF” appears in  
the display.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
Seek tuning  
1. Press the [BND] button and select the  
desired band (FM or AM).  
If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANU” in the display goes off and seek  
tuning is now available.  
2. Press the [å, ] lever upward or  
downward to start automatic station tuning.  
When the lever is pressed upward, search  
will be performing in the direction of higher  
frequencies. When the lever is pressed  
downward, search will be performed in the  
direction of lower frequencies.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the  
quick tuning mode, you can quickly tune the  
desired frequency.  
1. Press the [BND] button and select the  
desired band (FM or AM).  
If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANU” is lit in the display and manual tuning  
is now available.  
2. Tune into a station.  
Quick tuning:  
Press the [å, ] lever upward or  
downward and hold in position for 1 second  
or longer to begin station tuning.  
Step tuning:  
Press the [å, ] lever upward or  
downward to perform manual tuning.  
16  
DXZ665MP  
 
Radio Operations  
Recalling a preset station  
Instant station recall (ISR)  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory. Pressing the corresponding  
[DIRECT] button recalls the stored radio  
frequency automatically.  
Instant station recall is a special radio preset  
that instantly accesses a favorite radio station at  
a touch of a button. The ISR function even  
operates with the unit in other modes.  
ISR memory  
1. Press the [BND] button and select the  
1. Select the station that you wish to store in ISR  
memory.  
desired band (FM or AM).  
2. Press the corresponding [DIRECT] button to  
2. Press and hold the [ISR] button for 2 seconds  
recall the stored station.  
or longer.  
Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store that station  
into preset memory.  
Recalling a station with ISR  
In any mode, press the [ISR] button to turn on  
the radio function and tune the selected radio  
station. “ISR” appears in the display. Press the  
[ISR] button again to return to the previous  
mode.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
Auto store  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
1. Press the [BND] button and select the  
desired band (FM or AM).  
2. Press and hold the [  
] button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the  
preset channels.  
If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
Preset scan  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for a desired station in memory.  
1. Press the [  
2. When a desired station is tuned in, press the  
] button again to continue receiving that  
station.  
Note:  
• Be careful not to press and hold the [  
] button.  
[
] button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
DXZ665MP  
17  
 
CD/MP3/WMA Operations  
2. Files without MP3/WMA data will not play.  
The indication “:” appears in the play  
time display if you attempt to play files  
without MP3/WMA data.  
MP3/WMA  
What is MP3?  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format.  
Logical format (File system)  
1. When writing MP3/WMA file on a CD-R disc  
or CD-RW disc, please select “ISO9660 level  
1, 2 or JOLIET or Romeo” as the writing  
software format. Normal play may not be  
possible if the disc is recorded on another  
format.  
This MP3 features the original audio data  
compression to about 10 percent of its initial  
size with a high sound quality. This means that  
about 10 music CDs can be recorded on a CD-  
R disc or CD-RW disc to allow a long listening  
time without having to change CDs.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA play  
but the title must be within 64 single byte  
alphabetical letters and numerals (including  
an extension).  
What is WMA?  
WMA is the abbreviation of Windows Media  
Audio, an audio file format developed by  
Microsoft Corporation.  
3. Do not affix a name to a file inside a folder  
having the same name.  
Notes:  
Folder structure  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
• If you play a file with DRM (Digital Rights  
Management) for WMA remaining ON, no audio  
is output (The WMA indicator blinks).  
• Windows Media™, and the Windows ® logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
Number of files or folders  
1. Up to 255 files can be recognized per folder.  
Up to 512 files can be played.  
2. Tracks are played in the order that they were  
recorded onto a disc. (Tracks might not  
always be played in the order displayed on  
the PC.)  
To disable DRM (Digital Rights Management):  
1. When using Windows Media Player 8, click  
on TOOLS OPTIONS COPY MUSIC  
tab, then under COPY SETTINGS, unclick  
the check box for PROTECT CONTENT.  
Then, reconstruct files.  
3. Some noise may occur depending on the  
type of encoder software used while  
recording.  
2. When using Windows Media Player 9, click  
on TOOL OPTIONS MUSIC RECORD  
tab, then under Recording settings, unclick  
the Check box for RECORD PROTECTED  
MUSIC. Then, reconstruct files.  
Multisession function  
When a disc contains both normal CD type tracks  
and MP3/WMA type tracks mixedly, you can  
select which type of the recorded tracks to play.  
Personally constructed WMA files are used  
at your own responsibility.  
Default value is “CD”.  
Each time you press and hold the [BND] button  
for 1 second or longer, the mixed mode is  
switched between CD type or MP3/WMA type.  
The following indication appears in the title  
display when switching the track type to be  
played.  
Precautions when creating MP3/  
WMA disc  
Usable sampling rates and bit rates:  
1. MP3: Sampling rate 11.025 kHz-48 kHz,  
Bit rate: 8 kbps-320 kbps / VBR  
2. WMA: Bit rate 48 kbps-192 kbps  
File extensions  
Display when CD type  
M-SESS CD  
track is selected:  
Display when MP3/WMA  
type track is selected:  
1. Always add a file extension “.MP3” or  
.WMA” to MP3 or WMA file by using single  
byte letters. If you add a file extension other  
than specified or forget to add the file  
extension, the file cannot be played.  
M-SESS MP3  
1. Types of recording that can be played are as  
follows.  
18  
DXZ665MP  
 
CD/MP3/WMA Operations  
Notes:  
Setting  
Set to CD  
Disc  
Set to MP3/WMA  
• Be sure to close the MOTORIZED FACE after  
removing the CD.  
Mixed with CD and  
Play CD  
Play MP3/WMA  
The MOTORIZED FACE closes automatically 30  
seconds after removing the CD.  
MP3/WMA type tracks  
CD type track only Play CD  
Play CD  
If a CD (12 cm) is left in the ejected position for 15  
seconds, the CD is automatically reloaded. (Auto  
reload)  
MP3/WMA type track only Play MP3/WMA Play MP3/WMA  
2. After making these settings, remove the disc  
and then reinsert it.  
8 cm CDs are not auto reloaded. Be sure to remove  
it when ejected.  
If you force a CD into before auto reloading, this can  
damage the CD.  
3. When a mixed mode CD is loaded and CD is  
set, the track to be played first is MP3/WMA  
file data and no sound is heard.  
Note:  
Listening to a disc already loaded  
• When playing a CCCD (Copy Control CD), set the  
setting to CD type. When this is set to MP3/WWA  
type, the CD cannot be played normally in some  
cases.  
in the unit  
Press the [SRC] button to select the CD/MP3/  
WMA mode.  
When the unit enters the CD/MP3/WMA mode,  
play starts automatically.  
Disc-In-Play function  
If there is no disc loaded, the indication “NO  
DISCappears in the title display.  
The mode changes each time the [SRC] button is  
pressed. (Modes are not displayed for equipment  
that is not connected.)  
As long as the ignition key is turned to the ON or  
ACC position, this function allows you to turn the  
power to the unit and start playing the disc auto-  
matically when the disc is inserted even if the  
power is not turned on.  
Radio (Satellite radio) CD/MP3/WMA ➜  
(CD changer (iPod BB)) (CD changer) ➜  
(DVD changer) (TV) AUX Radio...  
CAUTION  
• Do not try to put your hand or fingers in the  
disc insertion slot. Also never insert  
foreign objects into the slot.  
Loading a CD  
1. Press the [Q] button. The MOTORIZED  
• Do not insert discs where adhesive comes  
out from cellophane tape or a rental CD  
label, or discs with marks where  
FACE opens.  
cellophane tape or rental CD labels were  
removed. It may be impossible to extract  
these discs from the unit and they may  
cause the unit to break down.  
CAUTION  
Be careful not to get your fingers caught  
when opening and closing the MOTORIZED  
FACE.  
2. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. The CD plays  
automatically after loading.  
Backup Eject function  
Just pressing the [Q] button ejects the disc  
even if the power to the unit was not turned on.  
Notes:  
1. Press the [Q] button. The MOTORIZED  
FACE opens and a CD ejects. “EJECT”  
appears in the display.  
• Never insert foreign objects into the CD SLOT.  
If the CD is not inserted easily, there may be another  
CD in the mechanism or the unit may require service.  
• Discs not bearing the  
CD-ROMs cannot be played by this unit.  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
Loading 8 cm compact discs  
or  
mark and  
CAUTION  
Be careful not to get your fingers caught  
when opening and closing the MOTORIZED  
FACE.  
2. Remove the CD and press the [Q] button to  
No adapter is required to play an 8 cm CD.  
close the MOTORIZED FACE.  
Insert the 8 cm CD into the center of the CD SLOT.  
3. After loading a CD, the MOTORIZED FACE  
closes automatically.  
DXZ665MP  
19  
 
CD/MP3/WMA Operations  
Notes:  
Fast-forward/fast-backward  
• Note that MOTORIZED FACE closes immediately  
after a CD is inserted into CD SLOT.  
• If no CD is loaded in the MOTORIZED FACE, it  
closes after 30 seconds.  
Fast-forward  
Press the [å, ] lever upward and hold in  
position for 1 second or longer.  
Fast-backward  
Press the [å, ] lever downward and hold in  
Pausing play  
position for 1 second or longer.  
1. Press the [  
] button to pause play.  
For MP3/WMA discs, it takes some time until the  
start of searching and between tracks. In addition,  
the playing time may have a margin of error.  
PAUSE” appears in the display.  
2. To resume CD play, press the [  
again.  
] button  
Folder Select  
This function allows you to select a folder  
containing MP3/WMA files and start playing  
from the first track in the folder.  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA disc and user titles input with this unit.  
1. Press the [D] button to display the title.  
1. Press the [DN] or the [UP] button.  
2. Each time you press the [T] button, the title  
Press the [DN] button to move the previous  
folder. Press the [UP] button to move the  
next folder.  
display changes in the following order:  
CD-TEXT disc  
User title (disc) CD-text title (disc) Artist  
name CD-text title (track) User title  
(disc)...  
Root folder  
1
2
MP3/WMA disc  
Folder Track Album TAG Artist TAG ➜  
Title TAG Folder...  
Notes:  
3
4
• If the CD playing is not a CD-text CD or no user  
title has been input, “ ” appears in the display.  
• If MP3/WMA disc is not input TAG, “  
in the display.  
A
” appears  
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.  
• Tag displays give priority to V2.3 / 2.2.  
• In the case of album Tags for WMA, the  
information written into the extension header is  
displayed.  
5
• Only ASCII characters can be displayed in Tags.  
Press the [UP] button while in the final folder  
to shift to the first folder.  
Folder without an MP3/WMA file is not  
selectable.  
Selecting a track  
Track-up  
2. To select a track, press the [å, ] lever  
1. Press the [å, ] lever upward to move  
upward or downward.  
to the beginning of the next track.  
2. Each time the [å, ] lever is pressed  
upward, playback proceeds to another track  
in the advancing direction.  
Top function  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
In case of MP3/WMA, the first track of a folder being  
played will be returned.  
Track-down  
1. Press the [å, ] lever downward to  
move the beginning of the current track.  
2. Press the [å, ] lever downward twice to  
move to the beginning of the previous track.  
20  
DXZ665MP  
 
CD/MP3/WMA Operations  
Operations Common to  
Each Mode  
Other various play functions  
Scan play  
This function allows you to locate and play the first  
10 seconds of all the tracks recorded on a disc.  
To change display setting  
1. Press and hold the [D] button for 1  
second or longer to switch to the  
adjustment selection display.  
1. Press the [SCN] button to perform scan play.  
SCAN” appears in the display.  
2. Press the [å, ] lever upward or  
downward to select the “item name”.  
Scan play starts from the next track after the  
track currently being played.  
“CLOCK” “BGV” “S-A PTN” ↔  
“S-A SENS” “S-A SPEED” ↔  
“POWER MSG” “SCRN SVR” ↔  
“MSG INPUT” “AUTO SCRL” ↔  
“DIMMER”  
Folder scan play  
This function allows you to locate and play the  
first 10 seconds of the first track of all the  
folders on an MP3/WMA disc.  
1. Press and hold the [SCN] button for 1  
3. Turn the [ROTARY] knob to select the  
desired setting value”.  
second or longer to perform folder scan play.  
F.SCAN” appears in the display.  
Folder scan play starts from the next track  
after the track currently being played.  
IIn the case of item names appearing with  
the “PUSH ENT” suffix, after the item name,  
the [  
] button must be pressed to display  
Repeat play  
the setting value.  
This function allows you to play the current track  
repeatedly.  
After completing settings, press the [D]  
button to return to the previous mode.  
1. Press the [RPT] button to perform repeat play.  
RPTappears in the display.  
Setting the clock  
2-1. Select “ CLOCK  
”.  
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA folder repeatedly.  
3-1. Press the [ ] button.  
3-2. Press the [å, ] lever upward or  
1. Press and hold the [RPT] button for 1 second  
downward to select the hour or the minute.  
or longer to perform folder repeat play.  
3-3. Turn the [ROTARY] knob to set the correct  
F.RPT” appears in the display.  
time.  
The clock is displayed in 12-hour format.  
Random play  
This function allows you to play all tracks  
recorded on a disc in a random order.  
3-4. Press the [  
memory.  
] button to store the time into  
Note:  
1. Press the [RDM] button to perform random  
You cannot set the clock when it is displayed with  
play.  
only the ignition on. If you drain or remove the car’s  
battery or take out this unit, the clock is reset. While  
setting the clock, if another button or operation is  
selected, the clock set mode is canceled.  
RDMappears in the display.  
Folder random play  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA disc in  
a random order.  
Setting the background vision  
This function allows you to change the  
background vision in the display.  
The factory default setting is “SCAN”.  
2-1. Select “ BGV”.  
1. Press and hold the [RDM] button for 1  
second or longer to perform folder random  
play.  
F.RDM” appears in the display.  
3-1. Turn the [ROTARY] knob to select the  
setting.  
To cancel play  
1. Press the operating button previously  
selected.  
Each time you turn the [ROTARY] knob,  
the setting changes in the following order:  
“SCAN” “MOVIE” “WALL 1” ↔  
“WALL 2” “WALL 3” “WALL 4” ↔  
“WALL 5” “OFF”  
DXZ665MP  
21  
 
Operations Common to Each Mode  
Setting the spectrum analyzer pattern  
Turning the screen saver function on  
or off  
The factory default setting is “PTN 1”  
2-1. Select “ S-A PTN”.  
This unit is provided with the screen saver  
function which allows you to show various kinds  
of patterns and characters in the operation  
status indication area of the display in a random  
order. You can turn on or off this function. If the  
button operation is performed with the screen  
saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
3-1. Turn the [ROTARY] knob to select the  
setting.  
Each time you turn the [ROTARY] knob,  
the setting changes in the following order:  
“PTN 1” “PTN 2”  
Setting the sensitivity of the spectrum  
analyzer  
This function allows you to adjust the sensitivity  
of the spectrum analyzer.  
The factory default setting is “MID”  
2-1. Select “ S-A SENS”.  
The factory default setting is “OFF”.  
2-1. Select “ SCRN SVR”.  
3-1. Turn the [ROTARY] knob to select the  
setting.  
3-1. Turn the [ROTARY] knob to select the  
Each time you turn the [ROTARY] knob,  
the setting changes in the following order:  
setting.  
Each time you turn the [ROTARY] knob,  
the setting changes in the following order:  
“OFF” “MSG INFO” “DEMO”  
“HIGH” “MID” “LOW”  
Entering MESSAGE INFORMATION  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
Setting the speed of the spectrum  
analyzer  
This function allows you to adjust the speed of  
the spectrum analyzer.  
The factory default setting is “HIGH”  
2-1. Select “ S-A SPEED”.  
The factory default setting is “Welcome to Clarion”.  
2-1. Select “ MSG INPUT  
3-1. Press the [ ] button.  
”.  
3-2. Press and hold the [BND] button for 1  
3-1. Turn the [ROTARY] knob to select the  
second or longer to clear the old message.  
setting.  
3-3. Press the [å, ] lever upward or  
Each time you turn the [ROTARY] knob,  
the setting changes in the following order:  
downward to move the cursor.  
3-4. Press the [BND] button to select a  
character. Each time you press the [BND]  
button, the character changes in the  
following orders:  
“HIGH” “MID” “LOW”  
Setting the power message  
You can set the power message “ON” or “OFF”.  
The message is “Clarion”.  
Capital letters Small letters Numbers/  
Symbols Umlaut Capital letters…  
The factory default setting is “ON”.  
2-1. Select “ POWER MSG”.  
3-5. Turn the [ROTARY] knob to select the  
desired character.  
3-1. Turn the [ROTARY] knob to select “ON” or  
OFF”.  
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
• ON:  
3-7. Press and hold the [  
] button for 2  
seconds or longer to store the message in  
memory and cancel input message mode.  
Press and hold the [BND] button for 1  
second or longer to cancel the input  
When the power is on or off, the message  
will appear in the display.  
• OFF:  
When the power is on or off, the message  
won’t appear in the display.  
message. Then press and hold the [  
]
button for 2 seconds or longer to store the  
message and the message return to default  
setting.  
22  
DXZ665MP  
 
Operations Common to Each Mode  
Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA title.  
The factory default setting is “ON”.  
Setting the external amplifier  
The factory default setting is “OFF”.  
2-1. Select “ AMP CANCEL”.  
2-1. Select “ AUTO SCRL”.  
3-1. Turn the [ROTARY] knob to select “ON” or  
OFF”.  
3-1. Turn the [ROTARY] knob to select “ON” or  
OFF”.  
• ON:  
Use with connected AMP.  
• ON:  
To scroll automatically.  
• OFF:  
Use with inside AMP.  
• OFF:  
To scroll just 1 time when the title was  
changed or the [T] button was pressed for 1  
second or longer.  
Displaying the Satellite ID No.  
This function only applies when a Satellite receiver  
is connected.  
The factory default setting is the upper 6 digits.  
2-1. Select “ SID DISP”.  
Dimmer control  
You can set the dimmer control “ON” or “OFF”.  
The factory default setting is “ON”.  
2-1. Select “ DIMMER”.  
3-1. Turn the [ROTARY] knob to switch between  
the display for the upper 6 digits and lower  
6 digits.  
3-1. Turn the [ROTARY] knob to select “ON” or  
OFF”.  
Selecting AUX IN sensitivity  
Make the following settings to select the  
sensitivity when sounds from external devices  
connected to this unit are difficult to hear even  
after adjusting the volume.  
The factory default setting is “MID”.  
2-1. Select “ AUX SENS”.  
To change other settings  
1. Press the [ADJ] button to switch to the  
adjustment selection display.  
2. Press the [å, ] lever upward or  
downward to select the “item name”.  
3-1. Turn the [ROTARY] knob to select “LOW”,  
MID” or “HIGH”.  
Each time the [å, ] lever is pressed  
up/down, the item display changes in the  
following order:  
Performing a system check  
This function allows you to perform a system  
check from the adjust mode when required.  
BLINK LED” “ AMP CANCEL”  
“ SID DISP” “ AUX SENS” ↔  
SYSTEM”  
2-1. Select “ SYSTEM  
”.  
3-1. Press and hold the [  
second or longer.  
] button for 1  
3. Turn the [ROTARY] knob to select the  
desired setting item”.  
SYSTEM CHECK” appears in the display,  
then the unit returns to the previous  
operation mode.  
After completing settings, press the [ADJ]  
button to return to the previous mode.  
Anti-theft indicator  
The red Anti-theft indicator is a function for  
preventing theft. When the DCP is removed  
from the unit, this indicator blinks.  
The factory default setting is “OFF”.  
2-1. Select “ BLINK LED”.  
3-1. Turn the [ROTARY] knob to select “ON” or  
OFF”.  
DXZ665MP  
23  
 
Operations Common to Each Mode  
Entering titles  
Clearing titles  
1. Select and play a CD in the CD changer or  
tune in to a TV station or TUNER for which  
you want to clear the title.  
Titles up to 9 characters long can be stored in  
memory and displayed for CD, CD changer,  
Radio stations and TV stations. The number of  
titles that can be entered for each mode are as  
follows.  
2. Press the [D] button and display the title  
display.  
Mode  
Number of titles  
50 titles  
3. Press and hold the [T] button for 1 second or  
longer.  
CD mode  
TV mode  
Radio mode  
The display switches to the title input display.  
20 titles  
30 titles  
4. Press and hold the [BND] button for 1  
second or longer.  
CD changer mode  
DCZ625 connected  
CDC655Tz connected  
Number of titles  
100 titles  
All characters in the title disappear.  
5. Press and hold the [  
] button for 2  
100 titles  
seconds or longer to clear the title and  
cancel title input mode.  
1. Press the [SRC] button to select the mode  
you want to enter a title (Radio, CD, CD  
changer or TV).  
Triggered audio mute for cellular  
telephones  
This unit requires special wiring to mute the  
audio signal automatically when a cellular  
telephone rings in the car.  
This function is not compatible with all cellular  
telephones Contact your local authorized Clarion  
dealer for information on proper installation and  
compatibility.  
2. Select and play a CD in the CD changer or  
tune in to a TV station or Radio for which you  
want to enter the title.  
3. Press the [D] button and display the title  
display.  
4. Press and hold the [T] button for 1 second or  
longer.  
The display switches to the title input display.  
5. Press the [å, ] lever upward or  
AUX function  
This system has an external input jack so you  
can listen to sounds and music from external  
devices connected to this unit.  
downward to move the cursor.  
6. Press the [BND] button to select a character.  
Each time you press the [BND] button, the  
character changes in the following order:  
Capital letters Small letters Numbers/  
Symbols Umlaut Capital letters…  
Setting the button illumination  
Press the [C] button to select a color type. Each  
time you press the [C] button, the type changes  
in the following orders:  
7. Turn the [ROTARY] knob to select the  
desired character.  
8. Repeat steps 5 to 7 to enter up to 9  
characters for the title.  
COLOR SCAN IndigoBlue SurfBlue ➜  
SilkyWhite AquaGreen FreshGreen ➜  
LeafGreen WarmAmber PassionRed ➜  
VividPink PalePink DarkViolet ➜  
PurePurple USER 1 USER 2 USER 3  
COLOR SCAN ...  
9. Press and hold the [  
] button for 2  
seconds or longer to store the title into  
memory and cancel title input mode.  
24  
DXZ665MP  
 
Operations Common to Each Mode  
Setting COLOR SCAN mode  
As selecting “COLOR SCAN”, the color  
automatically changes.  
The factory default setting is “COLOR SCAN”.  
After 3 seconds the color changes to the other.  
Setting USER mode  
The factory default setting is “RED 8”, “GREEN  
8”, “BLUE 8”.  
As selecting “USER 1, 2, 3”, press and hold the  
[C] button for 1 second or longer to enter the  
setting.  
1. Press the [å, ] lever upward or  
downward to select “ REDGREEN”  
BLUE”.  
2. Turn the [ROTARY] knob to select from 0 to 8.  
3. Press and hold the [  
] button for 2  
seconds or longer to store the color in  
memory and cancel setting mode.  
COLOR  
R
0
0
8
0
0
3
8
8
8
8
3
6
8
8
8
G
0
4
8
8
8
8
3
0
0
2
0
0
8
8
8
B
8
8
7
2
0
0
0
0
3
3
8
8
8
8
8
IndigoBlue  
SurfBlue  
SilkyWhite  
AquaGreen  
FreshGreen  
LeafGreen  
WarmAmber  
PassionRed  
VividPink  
PalePink  
DarkViolet  
PurePurple  
USER 1  
USER 2  
USER 3  
DXZ665MP  
25  
 
8. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
Note:  
Notes:  
• The following operations are the same as for CD  
mode:  
• If the CD playing is not a CD-text CD or no user  
title has been input, “ ” appears in the display.  
Pause  
• If a CD-text CD is not input its disc title or a track  
title, “ ” or “ ” appears in the display.  
Track selection  
Fast-forward/fast-backward  
Scan play  
Repeat play  
Random play  
Procedure to scroll a title  
Set “AUTO SCRL” to “ON” or “OFF”.  
(The factory default setting is “ON”. Refer to the  
subsection “Setting the method for title scroll”  
in section “Operations Common to Each  
Mode”.)  
See “CD/MP3/WMA Operations” (page 18-21)  
for details.  
CD changer functions  
When set to “ON”  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
CD changer functions. This unit can control a  
total of 2 changers.  
The title is automatically kept scrolling.  
When set to “OFF”  
To scroll just 1 time when the title was changed  
or the [T] button was pressed for 1 second or  
longer.  
Press the [SRC] button and select the CD  
changer mode to start play. If 2 CD changers  
are connected, press the [SRC] button to select  
the CD changer for play.  
If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “DISC CHECK”  
appears in the display while the player loads  
(checks) the magazine.  
Selecting a CD  
Press the [UP] or [DN] button to select the  
desired disc.  
If a CD is not loaded in a slot of magazine, pressing  
the [UP] or [DN] button can not work.  
If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
Other various play functions  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
CAUTION  
Disc scan play is useful when you want to select a  
desired CD.  
CD-ROM discs cannot be played from every  
CD changer, it’s depended on the model.  
1. Press and hold the [SCN] button for 1  
second or longer. “D.SCAN” appears in the  
display and disc scan play starts.  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
Disc repeat play  
After all the tracks on the current disc have  
been played, disc repeat play automatically  
replays the current disc over from the first track.  
This function continues automatically until it is  
cancelled.  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
1. Press the [D] button to display the title.  
2. Each time you press the [T] button, the title  
display changes in the following order:  
1. Press and hold the [RPT] button for 1 second  
or longer. “D.RPT” appears in the display  
and disc repeat play starts.  
User title (disc) CD-text title (disc) Artist  
name CD-text title (track) User title  
(disc)  
26  
DXZ665MP  
 
CD Changer Operations  
TV Operations  
Note:  
Disc random play  
• The following operations are performed the same  
as for radio mode:  
Channel selection  
Storing channels in memory  
Calling channels from memory  
Auto store  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order. This function continues  
automatically until it is cancelled.  
1. Press and hold the [RDM] button for 1  
second or longer. “D.RDM” appears in the  
display and disc random play starts.  
Preset scan  
See “Radio Operations” (page 16-17) for details.  
To cancel play  
1. Press the operating button previously  
selected.  
TV tuner functions  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
Watching a TV  
1. Press the [SRC] button and select the TV mode.  
2. Press the [BND] button to select the desired  
TV band (TV1 or TV2). Each time the button  
is pressed, the input selection toggles  
between TV1 and TV2.  
3. Press the [å, ] lever upward or  
downward to tune in the desired TV station.  
Watching a video  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12 V video cassette player (VCP) or video  
cassette recorder (VCR) to the TV tuner input  
terminal.  
1. Press and hold the [ADJ] button for 1 second  
or longer to select VTR.  
2. To return to the TV broadcast, press and  
hold the [ADJ] button for 1 second or longer.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
1. Press the [ADJ] button to switch to the  
adjustment selection display.  
2. Press the [å, ] lever upward or  
downward to select “ TV DIVER”.  
3. Turn the [ROTARY] knob clockwise to set to  
ON” or counterclockwise to set to “OFF”.  
ON:  
Sets the diver setting to ON.  
OFF:  
Sets the diver setting to OFF.  
4. Press the [ADJ] button to return to the  
previous mode.  
DXZ665MP  
27  
 
9. IN CASE OF DIFFICULTY  
Problem  
Cause  
Fuse is blown.  
Measure  
Power does not  
turn on.  
(No sound is  
produced.)  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
Power antenna lead is  
shorted to ground or  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifiers  
turn off before all wires are attached, use an  
external relay to provide remote-on voltage  
(excessive current required).  
Reset button  
Turn off the power, then press  
Nothing happens The microprocessor has  
when buttons are malfunctioned due to noise,  
the [RELEASE] button and  
remove the DCP.  
pressed.  
etc.  
Press the reset button for  
about 2 seconds with a thin  
rod.  
Display is not  
accurate.  
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with  
are dirty.  
cleaning alcohol.  
No sound heard  
No sound heard  
The speaker protection  
circuit is operating.  
1. Turn down sound volume. Function can also be  
restored by turning the power off and on again.  
(Speaker volume is reduced automatically when  
the speaker protection circuit operates).  
2. If the sound is muted again, consult our service  
department.  
MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.  
a disc.  
Files are not recognized as  
an MP3/WMA file.  
Use MP3/WMA files encoded properly.  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.  
Clean the compact disc with a soft cloth.  
Sound skips or is Compact disc is dirty.  
noisy.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is cut or  
skipped.  
MP3/WMA files are not  
encoded properly.  
Use MP3/WMA files encoded properly.  
Noise is  
generated or  
noise is mixed  
with sound.  
Sound is bad  
directly after  
power is turned  
on.  
Water droplets may form on  
the internal lens when the  
car is parked in a humid  
place.  
Let dry for about 1 hour with the power on.  
Wrong filename  
File system is not correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.  
28  
DXZ665MP  
 
10. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD deck’s mechanism and  
consult your store of purchase.  
ERROR 3  
ERROR 6  
ERROR 2  
ERROR 3  
ERROR 6  
ERROR 2  
ERROR 3  
ERROR 6  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched,  
non-warped-disc.  
A CD is loaded upside-down inside the CD  
deck and does not play.  
Eject the disc then reload it properly.  
A CD inside the CD changer is not loaded.  
This is a failure of CD changer’s mechanism  
and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
A DISC inside the DVD changer cannot be  
played.  
This is a failure of DVD mechanism and  
consult your store of purchase.  
A DISC cannot be played due to scratches,  
etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly  
Set the correct Parental level.  
ERROR P  
ERROR R  
Parental level error  
Region code error  
Eject the disc and replace correct region  
code disc.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
DXZ665MP  
29  
 
11. SPECIFICATIONS  
FM Tuner  
Audio  
Frequency Range: 87.9 MHz to 107.9 MHz  
Maximum Power Output: 212 W (53 W 4 ch)  
Bass Control Action (80 Hz): +14 dB, –12 dB  
Treble Control Action (10 kHz): +14 dB, –12 dB  
Line Output Level (CD 1 kHz): 1.8 V  
Usable Sensitivity: 9 dBf  
50dB Quieting Sensitivity: 15 dBf  
Alternate Channel Selectivity: 70 dB  
Stereo Separation (1 kHz): 35 dB  
Frequency Response ( 3 dB): 30 Hz to 15 kHz  
General  
Power Supply Voltage:  
14.4 V DC (10.8 to 15.6 V allowable), negative  
ground  
AM Tuner  
Frequency Range: 530 kHz to 1710 kHz  
Current Consumption: Less than 15 A  
Speaker Impedance: 4 (4 to 8 allowable)  
Weight / Source unit: 2.75 lb. (1.55 kg)  
Usable Sensitivity: 25 µV  
CD Player  
System: Compact disc digital audio system  
Weight / Remote control unit:  
1.41 oz. (40 g) (including battery)  
Usable Discs: Compact disc  
Dimensions / Source unit:  
7" (Width) 2" (Height) 6-1/8" (Depth)  
[178 (W) 50 (H) 155 (D) mm]  
Frequency Response ( 1 dB): 5 Hz to 20 kHz  
Dynamic Range (1 kHz): 95 dB  
Harmonic Distortion: 0.01%  
Dimensions / Remote control unit:  
1-3/4" (Width) 4-5/16" (Height) 7/16"  
(Depth)  
[44 (W) 110 (H) 11 (D) mm]  
Power Output :  
19 W RMS x 4 Channels at 4  
and 1 % THD+N  
Signal to Noise Ratio:  
81 dBA (reference: 1 W into 4 )  
Note:  
• Specifications and design are subject to change without notice for further improvement.  
30  
DXZ665MP  
 
Clarion Co., Ltd.  
PE-2788B  
280-8331-00  
All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Impreso en China  
2005/12  
 

Compaq Washer Dryer TRU64 User Manual
Cooper Lighting Indoor Furnishings 1049 User Manual
CyberData Microphone VoIP Multicast Microphone User Manual
Danby Dehumidifier DDR60A3GP User Manual
Earthquake Sound Speaker TNT T46 User Manual
EdgeStar Dishwasher PDW45E User Manual
Fitness Quest Home Gym 95e User Manual
Garland Convection Oven SUMG 100 GAS User Manual
Gefen Home Theater System EXT COMPAUD 44424 User Manual
GE Monogram Refrigerator ZICP360NX User Manual