Quick Start
Using the Cisco Unified IP Phone 7975 with Cisco StadiumVision
TV Control
NOTE: The Back softkey will take you back to the
previous operational screen. To scroll through multiple
listing pages, use the Page Up or Down arrows.
WELCOME
CONTROLLING TVS
To control the TVs, touch TV/Volume.
In your luxury suite, the Cisco Unified IP Phone 7975
can be used to control the TVs and to place calls. It has
a touch screen, softkeys (which change depending on
the screen contents and your site’s implementation), a
navigation pad, and a phone keypad.
As an alternative, you can touch Guide to view the
channel guide on the associated TV, or touch Keypad
and enter a desired channel number.
SELECTING A DISPLAY
The TVs are typically identified by location. Touch the
label of the TV you want to control or touch All.
ADJ USTING THE VOLUME
To adjust the volume, touch the following buttons:
SELECTING A CHANNEL
To increase the volume on the selected
Use the touch screen to select the TVs or
select a service.
Touch desired channel, or touch the Page Up or Page
Down arrows to see additional channels.
TV(s).
To decrease the volume on the selected
Use the softkeys to:
TV(s).
•
•
•
Navigate.
Mute or unmute all TVs with single touch.
Turn on and off all TVs with single touch.
To toggle between mute and unmute on the
selected TV(s).
The navigation pad is not used with Cisco
.
StadiumVision Director TV control services.
Use the keypad to dial a phone number or
enter a channel number.
Use the line buttons to select a phone line (if
multiple), speed dial, or go to a defined URL.
|