Quick Reference Guide
Q-Spot™ 560 LED QRG
13 or 17-channel DMX-512 LED moving yoke
Features
Pan: 540 / tilt: 270
Color wheel:
7 colors + white
Split colors
Rainbow color spin at variable speeds
Gobo wheel 1:
Gobo shake
7 gobos + open
Gobo wheel spin at variable speeds
Gobo wheel 2:
Indexed, rotating gobo wheel with gobo shake
6 slot-n-lock gobos + open
2 glass, 4 metal
Rotating gobo wheel spin at variable speeds
Extremely bright with 19 degree beam angle for big looks
3-facet, high-speed rotating prism at variable speeds
Variable focus
Variable iris
Variable electronic shutter (for strobing)
Variable (16-bit) electronic dimmer (0 – 100%)
Remote fixture reset & vector speed channel
255 user-programmable steps without DMX controller
Move-in-black for pan/tilt
Built-in automated programs
Built-in sound activated programs
3-high-powered, 60 W (14 A) LEDs
User-selectable pan/tilt ranges
Automatic pan & tilt correction
Quiet operation
Additional
Features
3-pin and 5-pin DMX connections
Page 3 of 16
Q-Spot™ 560 LED QRG
The Q-Spot™ 560 LED is a high power moving yoke product equipped
Product
Description
with three (3) 60-watt white LEDs. It includes a color wheel with seven
slots plus white. The Q-Spot™ 560 LED also comes with two gobo wheels.
One gobo wheel has six rotating slot-n-lock gobos plus open, and the other
has seven fixed gobos plus open. The Q-Spot™ 560 LED also includes
remote focus and a rotating 3-face prism
Power Switch
DMX In
Rear View
Fuse
DMX Out
Product
Overview
Control Panel
Front View
Page 4 of 16
Q-Spot™ 560 LED QRG
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
AC
Power
Fuse 1. Disconnect this product/product from the power outlet.
Replacement
2. Wedge the tip of a flat head screwdriver into the slot of the fuse holder
and pry the safety cap out of the housing, which will pull the installed
fuse.
3. Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating (T 5 A, 250 V).
4. Insert the fuse holder back in place, and reconnect power.
The Q-Spot™ 560 LED can work with a DMX controller when linked using
a regular DMX serial connection.
DMX
Linking
If you are not familiar with the DMX standard, please download the DMX
DMX The Q-Spot™ 560 LED uses a regular DMX data connection for its DMX
personalities, Basic and Advanced.
Connection
Download the Q-Spot™ 560 LED User Manual and refer to the Setup
chapter to learn how to connect this product for DMX operation, and the
Operation chapter to learn in detail how to configure this product for DMX
operation.
Master/Slave The Q-Spot™ 560 LED uses the DMX data connection for its Master/Slave
mode.
Connection
Download the Q-Spot™ 560 LED User Manual and refer to the Setup
chapter to learn how to connect this product for Master/Slave operation, and
the Operation chapter to learn in detail how to configure this product for
Master/Slave operation.
Page 5 of 16
Q-Spot™ 560 LED QRG
Before mounting this product, read the Safety Notes at the beginning of this
guide and on page 2 of the product’s User Manual. Then, follow the
Mounting
mounting procedure indicated in the Setup chapter of the User Manual.
Safety Cable
Mounting Brackets
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
Page 6 of 16
Q-Spot™ 560 LED QRG
1. Turn the product off and disconnect it from the power outlet.
Gobo
Replacement
2. Open the head cover by loosening the four fastening screws at the sides
of the top cover.
3. Separate the gobo plate away from the gobo wheel by pushing it toward
the front of the moving head (direction 1 in the diagram). Be careful not
to push the gobo out of the gobo plate.
4. Extract the gobo plate l by pulling it outward (direction 2 in the
diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in
place and remove the gobo from the gobo plate.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo plate under the pressure plate near the center of
the gobo wheel.
8. Push the gobo plate inwards. DO NOT force the gobo plate into the
gobo wheel slot. If correctly installed, the gobo plate should easily snap
itself into the gobo wheel slot.
Page 7 of 16
Q-Spot™ 560 LED QRG
For details on how to program this product, please refer to the product’s
User Manual.
Programming
Control Panel
Description
Button
Function
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
selected value into the selected function
Navigates upwards through the menu list and increases the
numeric value when in a function
<ENTER>
<UP>
Navigates downwards through the menu list and decreases
the numeric value when in a function
<DOWN>
Start Address To ensure full access to all channels in each DMX mode, the highest
recommended DMX addresses are as follows:
Mode
Address
Basic
Advanced
500
496
Page 8 of 16
Q-Spot™ 560 LED QRG
Menu Options
Main Level
Programming Levels
Description
Intro
Address
001~512
Yes
Selects a starting DMX address
Reset
Resets the product’s custom settings
No
DMX512
Auto 1
Auto 2
Sound 1
Sound 2
Custom
Test
Selects DMX512-A running mode
Selects the first automatic program
Selects the second automatic program
Selects the first sound activated program
Selects the second sound program
Selects the user customizable program
Selects the fixture’s test sequence
Selects the Slave running mode
Selects the 13-channel DMX mode
Selects the 17-channel DMX mode
Turns off the display after 60 s
Run
Slave
Basic
Person
Display
Keylock
Advanced
60 Close
Bright
Keeps the display on
Yes
Activates the control panel password
Linear dimmer
No
Dimmer 0
Dimmer 1
Dimmer 2
Dimmer 3
Dimmer 4
Dimmer
Slow (DIM 4) to fast (DIM1) dimmer curves
Version
Number
Edition
Info
Pan
Shows the version of the installed S/W
Defines the direction of pan function
Normal
Reverse
Normal
Reverse
Normal
Reverse
Yes
Tilt
Defines the direction of tilt function
Defines the direction of dimmer function
Activates the changes
Invert
Dimmer
Use
No
P/Start
P/Finish
T/Start
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
0~255
Range
T/Finish
Yes
No
Use
Activates the changes
Continues on the next page
Page 9 of 16
Q-Spot™ 560 LED QRG
Continued from previous page
Yes
Main Level
Special
Programming Levels
Description
Blackd
Reset
Activates the move-in black delay (3 s)
No
DMX
System
On
The DMX controller can reset the fixture
The control panel can reset the fixture
Fanwait
DMXerror
Forces the fan to stop during a blackout
Off
Save
Blak
Save the last look when DMX is Lost
Goes to black when DMX is lost
Selects the program step
Step
Pan
Selects the pan position
Tilt
Selects the tilt position
Speed
Color
Gobo1
Gobo2
Gobo2rot
Prism
Prismt
Iris
Selects the pan/tilt speed
Selects the color (color wheel)
Selects a fixed gobo (static or shake)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the prism rotation mode
Selects the fine prism adjustment
Selects the iris adjustment
0~255
Edit
Focus
Dimmer
Strobe
Time
Selects a focus point
Selects the dimmer value
Selects the strobe frequency and mode
Selects the step duration
Yes
No
Use
Activates the changes
****
Yes
No
Extra
Password
Default
Opens the Default menu
Default
Sets unit back to default factory settings
Page 10 of 16
Q-Spot™ 560 LED QRG
DMX Values
Basic
Channel Function
Value
Percent/Setting
1
2
Pan
Tilt
000 255 0~540°
000 255 0~270°
000 009 No Function
010 019 Red
020 029 Green
030 039 Yellow
040 049 Blue
050 059 Orange
060 069 Magenta
070 079 Light Blue
080 099 Light Blue/Magenta
100 119 Magenta/Orange
120 139 Orange/Blue
140 159 Blue/Yellow
3
Color wheel
160 179 Yellow/Green
180 199 Green/Red
200 219 Red/Open
220 255 Rainbow or Linear Effect
000 010 No gobo
011 020 Gobo 1
021 030 Gobo 2
031 040 Gobo 3
041 050 Gobo 4
051 060 Gobo 5
061 070 Gobo 6
071 080 Gobo 7
4
Gobo Wheel 1
081 095 Shaking gobo 7
096 110 Shaking gobo 6
111 125 Shaking gobo 5
126 140 Shaking gobo 4
141 155 Shaking gobo 3
156 170 Shaking gobo 2
171 185 Shaking gobo 1
186 255 Flow effect
000 010 No gobo
011 020 Gobo 1
021 030 Gobo 2
031 040 Gobo 3
041 050 Gobo 4
051 060 Gobo 5
061 070 Gobo 6
5
Gobo Wheel 2
071 085 Shaking gobo 6
086 100 Shaking gobo 5
101 115 Shaking gobo 4
116 130 Shaking gobo 3
131 145 Shaking gobo 2
146 160 Shaking gobo 1
161 255 Flow effect
Continues on the next page
Page 11 of 16
Q-Spot™ 560 LED QRG
Continued from previous page
Basic
Channel Function
Value
Percent/Setting
(cont.)
360° Indexing
Clockwise Rotation ~ Slow to Fast
No Function
Counter-Clockwise Rotation ~ Slow to
Fast
000 060
061 150
151 165
166 255
Gobo Wheel 2
Rotation
6
7
000 009 No Function
010 039 Prism
040 049 Effect1
050 059 Effect2
060 069 Effect3
070 079 Effect4
080 089 Effect5
090 099 Effect6
100 109 Effect7
110 119 Effect8
120 129 Effect9
130 139 Effect10
140 149 Effect11
150 159 Effect12
160 169 Effect13
170 179 Effect14
180 189 Effect15
190 199 Effect16
200 209 Effect17
210 219 Effect18
220 229 Effect19
230 239 Effect20
240 255 Prism
Prism
000 009 No Function
010 119 Clockwise rotate ~ slow to fast
120 129 No Function
130 255 Counter-clockwise rotation ~ slow to fast
Prism Rotation
8
9
000 199 Linear Iris
200 209 Iris Effect1
210 219 Iris Effect2
220 229 Iris Effect3
230 239 Iris Effect4
240 255 Random
Iris
Focus
000 255 0~100%
000 255 0~100%
10
11
Dimmer
000 031 Close
032 063 Open
064 095 Strobe 0~20Hz
096 127 Open
128 159 Pulse Effect
Strobe
12
160 191 Open
192 223 Random Effect
224 255 Open
Continues on the next page
Page 12 of 16
Q-Spot™ 560 LED QRG
Continued from previous page
Channel Function Value Percent/Setting
Basic
(cont.)
000 019 Dim setting as set in product
020 039 Pan/tilt black activation
040 059 Pan/tilt black deactivation
060 139 No Function
140 149 Auto program 1 (3 s activation delay)
150 159 Auto program 2 (3 s activation delay)
160 169 Test (3 s activation delay)
170 179 Custom program (3 s activation delay)
180 189 Sound1
13
Control
190 199 Sound2
200 219 Reset (3 s activation delay)
220 235 No Function
236 239 DIM0 (3 s activation delay)
240 243 DIM1 (3 s activation delay)
244 247 DIM2 (3 s activation delay)
248 251 DIM3 (3 s activation delay)
252 255 DIM4 (3 s activation delay)
Page 13 of 16
Q-Spot™ 560 LED QRG
Advanced
Channel Function
Value
Percent/Setting
1
2
3
Pan
000 255 0~540°
Pan Fine
Tilt
000 255 Fine movement control
000 255 0~270°
4
5
TiltFine
000 255 Fine movement control
000 255 Fast~Slow
Pan/Tilt Speed
000 009 No Function
010 019 Red
020 029 Green
030 039 Yellow
040 049 Blue
050 059 Orange
060 069 Magenta
070 079 Light Blue
080 099 Light Blue/Magenta
100 119 Magenta/Orange
120 139 Orange/Blue
140 159 Blue/Yellow
160 179 Yellow/Green
180 199 Green/Red
200 219 Red/Open
220 255 Rainbow or Linear Effect
6
Color wheel
000 010 No gobo
011 020 Gobo 1
021 030 Gobo 2
031 040 Gobo 3
041 050 Gobo 4
051 060 Gobo 5
061 070 Gobo 6
071 080 Gobo 7
7
Gobo Wheel 1
081 095 Shaking gobo 7
096 110 Shaking gobo 6
111 125 Shaking gobo 5
126 140 Shaking gobo 4
141 155 Shaking gobo 3
156 170 Shaking gobo 2
171 185 Shaking gobo 1
186 255 Flow effect
000 010 No gobo
011 020 Gobo 1
021 030 Gobo 2
031 040 Gobo 3
041 050 Gobo 4
051 060 Gobo 5
061 070 Gobo 6
8
Gobo Wheel 2
071 085 Shaking gobo 6
086 100 Shaking gobo 5
101 115 Shaking gobo 4
116 130 Shaking gobo 3
131 145 Shaking gobo 2
146 160 Shaking gobo 1
161 255 Flow effect
Continues on the next page
Page 14 of 16
Q-Spot™ 560 LED QRG
Continued from previous page
Advanced
(cont.)
Channel Function
Value
Percent/Setting
360° Indexing
Clockwise Rotation ~ Slow to Fast
No Function
Counter-Clockwise Rotation ~ Slow to
Fast
000 060
061 150
151 165
166 255
Gobo Wheel 2
Rotation
9
000 009 No Function
010 039 Prism
10
040 049 Effect1
050 059 Effect2
060 069 Effect3
070 079 Effect4
080 089 Effect5
090 099 Effect6
100 109 Effect7
110 119 Effect8
120 129 Effect9
130 139 Effect10
140 149 Effect11
150 159 Effect12
160 169 Effect13
170 179 Effect14
180 189 Effect15
190 199 Effect16
200 209 Effect17
210 219 Effect18
220 229 Effect19
230 239 Effect20
240 255 Prism
Prism
000 009 No Function
010 119 Clockwise rotate ~ slow to fast
120 129 No Function
130 255 Counter-clockwise rotation ~ slow to fast
Prism Rotation
11
12
000 199 Linear Iris
200 209 Iris Effect1
210 219 Iris Effect2
220 229 Iris Effect3
230 239 Iris Effect4
240 255 Random
Iris
Focus
000 255 0~100%
13
14
15
Focus Fine
Dimmer
000 255 Fine movement control
000 255 0~100%
000 031 Close
032 063 Open
064 095 Strobe 0~20Hz
096 127 Open
128 159 Pulse Effect
160 191 Open
Strobe
16
192 223 Random Effect
224 255 Open
Continues on the next page
Page 15 of 16
Q-Spot™ 560 LED QRG
Continued from previous page
Value Percent/Setting
Advanced Channel Function
(cont.)
000 019 Dim setting as set in product
020 039 Pan/tilt black activation
040 059 Pan/tilt black deactivation
060 139 No Function
140 149 Auto program 1 (3 s activation delay)
150 159 Auto program 2 (3 s activation delay)
160 169 Test (3 s activation delay)
170 179 Custom program (3 s activation delay)
180 189 Sound1
17
Control
190 199 Sound2
200 219 Reset (3 s activation delay)
220 235 No Function
236 239 DIM0 (3 s activation delay)
240 243 DIM1 (3 s activation delay)
244 247 DIM2 (3 s activation delay)
248 251 DIM3 (3 s activation delay)
252 255 DIM4 (3 s activation delay)
World Headquarters
CHAUVET®
General Information
United Kingdom and Ireland
CHAUVET® Europe Ltd.
General Information
Contact Us
Address:
5200 NW 108th Avenue
Address:
Unit 1C
Sunrise, FL 33351
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
Fax:
Toll free:
(954) 929-1115
(954) 929-5560
(800) 762-1084
Voice:
Fax:
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
Technical Support
Voice:
Fax:
(954) 929-1115 (Press 4)
(954) 756-8015
Email:
Email:
World Wide Web
World Wide Web
Outside the US, United Kingdom, or Ireland, contact your distributor of
record. Follow their instructions to request support or to return a product.
Visit our Web site for contact details.
Q-Spot™ 560 LED QRG – Rev. 03
© Copyright 2011 CHAUVET®
All rights reserved
Printed in the P. R. C.
Page 16 of 16
|