Chauvet Landscape Lighting Landscape Lighting User Manual

Snapshot  
Use on Dimmer  
Outdoor Use  
LED Pinspot™ 2  
Sound Activated  
DMX  
Master/Slave  
Auto-ranging  
Power Supply  
Replaceable Fuse  
User Serviceable  
Duty Cycle  
User Manual  
3000 N 29th Ct, Hollywood, FL 33020 U.S.A.  
(800) 762-1084 (954) 929-1115  
FAX (954) 929-5560  
 
Contact Us  
World Wide  
General Information  
CHAUVET®  
3000 North 29th Court  
Hollywood, FL 33020  
voice:  
954.929.1115  
fax: 954.929.5560  
toll free: 800.762.1084  
Technical Support  
CHAUVET®  
3000 North 29th Court  
Hollywood, FL 33020  
voice:  
954.929.1115 (Press 4)  
fax: 954.929.5560 (Attention: Service)  
World Wide Web  
Safety Instructions  
Please read these instructions carefully, which includes important information  
about the installation, usage and maintenance of this product.  
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that  
they also receive this instruction booklet.  
Always make sure that you are connecting to the proper voltage, and that the line voltage you are  
connecting to is not higher than that stated on the decal or rear panel of the fixture.  
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to  
rain or moisture.  
Make sure there are no flammable materials close to the unit while operating.  
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent  
surfaces. Be sure that no ventilation slots are blocked.  
Secure fixture to fastening device using a safety chain.  
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher  
than this.  
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the  
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please  
contact the nearest authorized technical assistance center.  
Never connect the device to a dimmer pack.  
Make sure the power cord is never crimped or damaged.  
Never disconnect the power cord by pulling or tugging on the cord.  
Avoid direct eye exposure to the light source while it is on.  
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs  
yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115.  
LED Pinspot™ 2 User Manual  
3
5/10/2010 12:09 PM  
 
   
2. INTRODUCTION  
Features  
Extremely compact LED pinspot  
High-power, 3 W (700 mA) LED  
Includes multiple lenses to change beam angles  
Product Overview  
Hanging  
bracket  
Bracket  
adjustment  
knob  
148 mm  
5.9 in  
193 mm  
7.6 in  
105 mm  
4.2 in  
LED Pinspot™ 2 User Manual  
4
5/10/2010 12:09 PM  
 
     
Mounting  
Orientation  
This fixture may be mounted in any safe position, provided there is adequate room for ventilation.  
Rigging  
Hanging Clamp  
It is important never to obstruct the fan or vents pathway. Mount  
the fixture using, a suitable “C” or “O” type clamp. Adjust the  
angle of the fixture by loosening both knobs and tilting the fixture.  
After finding the desired position, retighten both knobs.  
When selecting installation location, take into  
consideration lamp replacement access and routine  
maintenance.  
Safety cables must always be used.  
Note!  
Clamp is sold separately.  
Never mount in places where the fixture will be exposed to  
rain, high humidity, extreme temperature changes or  
restricted ventilation.  
Lens Replacement  
This fixture comes with an optional lens that modifies the beam angle. Please see the instructions  
below for instructions on replacing the lens.  
1. Remove the retainer ring.  
2. Remove the lens (the lens will fall out without the retainer ring installed).  
3. Insert the new lens. Use caution, as it may fall out until the retainer ring is installed in step #4!  
4. Install the retainer ring.  
5. Assure that the installation is tight.  
If the lens is not installed properly, it may fall out. This may be a safety hazard if installed overhead.  
Lens  
Retainer Ring  
LED Pinspot™ 2 User Manual  
5
5/10/2010 12:09 PM  
 
       
3. APPENDIX  
General Maintenance  
To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage  
and environment are contributing factors in determining frequency. As a general rule, fixtures should  
be cleaned at least twice a month. Dust build up reduces light output performance and can cause  
overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off  
fixture before conducting maintenance.  
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust  
collected on external vents and internal components. Clean all glass when the fixture is cold with a  
mild solution of glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue. Apply  
solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish optical  
surfaces until they are free of haze and lint.  
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to  
optimize light output. Cleaning frequency depends on the environment in which the fixture operates:  
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s  
optics. Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully. Clean  
the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.  
Returns Procedure  
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.  
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).  
Products returned without an RMA # will be refused. Call CHAUVET® and request RMA # prior to  
shipping the fixture. Be prepared to provide the model number, serial number and a brief description  
of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from  
inadequate packaging is the customer’s responsibility. CHAUVET® reserves the right to use its own  
discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is  
always a safe method to use.  
Note:  
If you are given an RMA #, please include the following information on a piece of  
paper inside the box:  
1) Your name  
2) Your address  
3) Your phone number  
4) The RMA #  
5) A brief description of the symptoms  
Claims  
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be  
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and  
submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim  
for items such as missing component/part, damage not related to shipping, and concealed damage,  
must be made within seven (7) days of receiving merchandise.  
LED Pinspot™ 2 User Manual  
6
5/10/2010 12:09 PM  
 
       
General Troubleshooting  
Symptom  
Solution(s)  
Check total load placed on device  
Foggers  
& Snow  
Dimmers  
& Chaser  
Lights  
Controllers  
Breaker/Fuse keeps  
blowing  
Device has no power Check for power on Mains.  
Check device’s fuse. (internal  
and/or external)  
No light output  
Call service technician  
If you still have a problem after trying the above solutions, please contact CHAUVET®  
Technical Support.  
Technical Specifications  
WEIGHT & DIMENSIONS  
Length..........................................................................................................................7.6 in (193 mm)  
Width............................................................................................................................4.2 in (105 mm)  
Height ..........................................................................................................................5.9 in (148 mm)  
Weight........................................................................................................................... 0.9 lbs (0.4 kg)  
POWER  
Autoswitching Power Supply ...........................................................................100~240 VAC, 50/60 Hz  
Power Consumption @ 120 V ..................................................................4 W, 0.1 A max, 0.1 A inrush  
LIGHT SOURCE  
LED....................................................................................... 1x 700 mA (1 White 6,500 K) 50,000 hrs  
PHOTO OPTIC  
Luminance (with installed 6°) @ 1 m .................................................................................... 15,000 lux  
Luminance (with included 9°)(extra lens) @ 1 m .................................................................... 5,550 lux  
Beam Angle (installed) ...................................................................................................................... 6°  
Beam Angle (included)...................................................................................................................... 9°  
THERMAL  
Maximum ambient temperature......................................................................................104° F (40° C)  
ORDERING INFORMATION  
LED Pinspot2........................................................................................................... LEDPINSPOT2  
WARRANTY INFORMATION  
Warranty ........................................................................................................... 1-year limited warranty  
CHAUVET®, 2010, All Rights Reserved  
Information and specifications in this User Manual are subject to change without notice. CHAUVET®  
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.  
LED Pinspot™ 2 User Manual  
7
5/10/2010 12:09 PM  
 
   

Bionaire Humidifier CP0260 User Manual
Bose Headphones SIE2 User Manual
Boston Acoustics Car Stereo System GT 50 User Manual
Brinkmann Gas Grill OUTDOOR BARBECUE GRILL SMOKER User Manual
Brother Fax Machine FAX 202 User Manual
Brother Printer QL 500W User Manual
Bushnell Binoculars 202342 User Manual
Carrier Furnace 58MTB User Manual
Cisco Systems Conference Phone CP7910GRF User Manual
Cisco Systems Network Card WUSB54GX4 User Manual