Casio Projector XJ H1700 User Manual

EFS  
English  
DATA PROJECTOR  
XJ-H1600/XJ-H1650***  
XJ-H1700/XJ-H1750**  
XJ-H2600/*XJ-H2650*  
XJ-ST145*/XJ-ST155**  
QuBeicskurSettaorkteeGpuailldueser documentation  
handy for future reference.  
To obtain the latest version of this  
manual visit the website at the URL  
below.  
Français  
GuCiodnesedrveezmlaisdoecuemnemntaatirocnhàeporartépeide  
* USB port models  
de main pour toute référence future.  
Pour obtenir la toute dernière version de  
ce manuel, consultez le site à l’adresse  
suivante.  
* Modèles à port USB  
* Modelos con puerto USB  
Español  
GuAsíaegdúeresine idceiotenreárpaidmoano toda la  
documentación del usuario para  
futuras consultas.  
Para obtener la versión más reciente de  
este manual, visite nuestro sitio web en  
la siguiente URL.  
• Some models covered by this User’s Guide may not be available  
in certain geographic areas.  
• Certains modèles couverts par ce mode d’emploi peuvent ne  
pas être commercialisés dans certaines zones géographiques.  
• Algunos modelos cubiertos por esta Guía del usuario pueden no  
estar disponibles en determinadas áreas geográficas.  
 
Safety Precautions  
Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to  
use it. After reading this User’s Guide, keep it in a safe place for future reference.  
About safety symbols  
Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to  
protect you and others against the risk of injury and against material damage. The meaning of each of the  
symbols is explained below.  
This symbol indicates information that, if ignored or applied incorrectly,  
creates the risk of death or serious personal injury.  
Danger  
*
*
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of death or serious personal injury.  
Warning  
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of personal injury or material damage.  
Caution  
*
Icon Examples  
A triangle indicates a situation against which you need to exercise caution. The example shown  
here indicates you should take precaution against electric shock.  
!
$
A circle with a line through it indicates information about an action that you should not perform.  
The specific action is indicated by the figure inside the circle. The example shown here means  
disassembly is prohibited.  
A black circle indicates information about an action that you must perform. The specific action  
is indicated by the figure inside the circle. The example shown here indicates you must unplug  
the power cord from the power outlet.  
Precautions During Use  
Malfunction  
Immediately stop using the projector if  
*Warning  
the screen appears abnormal, or if any  
other abnormal operation occurs even  
though you are operating the projector  
correctly. Continued use creates the risk  
of fire and electric shock. Immediately  
perform the following steps.  
-
Smoke, odor, heat, and other  
abnormalities  
Should you ever notice smoke, strange  
odor, or any other abnormality,  
immediately stop using the projector.  
Continued use creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
E-1  
 
Safety Precautions  
Power cord  
Water and foreign matter  
Misuse of the power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
following precautions.  
Never allow water to get on the projector.  
Water creates the risk of fire and electric  
shock.  
+
+
%
%
Never place a vase or any other container  
of water on top of the projector. Water  
creates the risk of fire and electric shock.  
Water or other liquid, or foreign matter  
(metal, etc.) getting into the projector  
creates the risk of fire and electric shock.  
Should anything get inside the projector,  
immediately perform the following steps.  
• Be sure to use only the accessories that come  
with the projector.  
• Make sure that you use a power source with the  
same voltage as that specified for the projector.  
• Do not overload a power outlet with too many  
devices.  
• Do not locate the power cord near a stove.  
• Do not use the power cord that comes with the  
projector with any other device.  
• Do not share the outlet supplying power to the  
projector with other devices. If you are using an  
extension cord, make sure that the ampere rating  
of the extension cord is compatible with the  
power consumption value of this projector.  
• Never use the power cord while it is still bundled  
together.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Disassembly and modification  
Never try to take the projector apart or  
modify it in any way. The projector  
contains a large number of high-voltage  
components that create the risk of  
electric shock and burn injury. Also, note  
that problems caused by unauthorized  
projector disassembly or modification are  
not covered by the warranty and are not  
eligible for repair by CASIO.  
• Use a conveniently located power outlet that you  
can reach easily when you need to unplug the  
projector.  
!
A damaged power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
-
following precautions.  
• Never place heavy objects on the power cord  
and never expose it to heat.  
Be sure to leave all internal inspection, adjustment,  
and repair up to your original dealer or authorized  
CASIO service center.  
• Make sure the power cord is not pinched  
between the wall and the rack or table where the  
projector is located, and never cover the power  
cord with a cushion or other object.  
• Never try to modify the power cord, allow it to  
become damaged, or subject it to excessive  
bending.  
Dropping and impact  
Continued use of the projector after it has  
been damaged by dropping or other  
mistreatment creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
• Do not twist the power cord or pull on it.  
Never touch the power cord or plug while  
your hands are wet.  
Doing so creates the risk of electric  
shock.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
"
• When using this projector in the country where  
you purchased it, be sure to use the power cord  
that came with it. Whenever using the projector  
in another country, be sure to purchase and use  
a power cord that is rated for the voltage of that  
country. Also make sure that you are aware of  
the Safety Standards that apply in that country.  
When going out, make sure the projector  
is in a location away from pets and other  
animals, and unplug the power plug from  
the power outlet. A power cord damaged  
by chewing can cause shorts, and  
creates the risk of fire.  
-
E-2  
 
Safety Precautions  
Intake-exhaust vents  
Disposal by burning  
Never try to dispose of the projector by  
The intake-exhaust vents become very hot while  
the projector is running. Never touch them. Doing  
so creates the risk of burn injury. The areas near  
the intake-exhaust vents also become quite hot.  
Never locate objects made of plastic or other  
heat-sensitive materials near or under the  
projector. Doing so creates the risk of deformation  
and discoloration of the object.  
burning it. Doing so can cause an  
explosion, which creates the risk of fire  
and personal injury.  
-
Looking into the lens or vents while  
light source unit is on  
Never look directly into the lens or vents  
while light source unit is on. The strong  
light emitted by the projector creates the  
risk of eye damage.  
Lens cover  
Be sure to remove the lens cover before turning on  
the projector. Never leave the lens cover attached  
while the projector is in use.  
-
Blocking the vents  
Never allow the vents to become  
blocked. Doing so causes internal heat  
Location  
-
Never locate the projector in any of the following  
types of locations. Doing so creates the risk of fire  
and electric shock.  
• Near an area subject to strong vibration  
• An area subject to large amounts of moisture or  
dust  
• In a kitchen or other area exposed to oil smoke  
• Near a heater, on a heated carpet, or in an area  
exposed to direct sunlight  
• An area subject to temperature extremes  
(Operating temperature range is 5°C to 35°C  
(41°F to 95°F)).  
build up, which creates the risk of fire and  
breakdown of the projector. Touching the  
projector while it is hot creates the risk of  
burn injury. Make sure that you always  
observe the following precautions.  
• Allow at least 30cm (11.8 inches) between the  
projector and walls.  
• Do not insert the projector into any space where  
air circulation is poor.  
• Never cover the projector with a blanket or any  
similar item.  
• Locate the projector on a firm, flat surface during  
use. Never use the projector while it is on a  
carpet, blanket, towel, seat cushion, or other  
pliable surface.  
• Never stand the projector up on either end during  
use.  
Heavy objects  
Never place heavy objects on the projector or  
climb on top of the projector. Doing so creates the  
risk of fire and electric shock.  
Water  
Projector cabinet  
Never locate the projector in a bathroom or  
anywhere else there is the chance that it will be  
splashed with water.  
Never open the projector’s cabinet.  
Doing so creates the risk of electric  
shock.  
Unstable location  
Cleaning  
Never place the projector on an unstable  
Before cleaning the projector, be sure to  
turn it off and unplug it from the power  
outlet. Failure to do so creates the risk of  
electric shock.  
surface or on a high shelf. Doing so can  
cause it to fall, creating the risk of  
personal injury.  
-
$
E-3  
 
Safety Precautions  
Using the projector on a base with  
casters  
*Caution  
Whenever using the projector on a base that has  
casters, make sure that you lock the casters when  
not moving the base.  
Power cord  
Misuse of the power cord creates the risk  
of fire and electric shock. Make sure that  
you always observe the following  
precautions.  
-
Lightening  
During a lightening storm, do not touch the plug of  
the projector’s power cord.  
• When unplugging the power cord, always grasp  
the plug, and do not pull on the power cord.  
• Insert the plug into the power outlet as far as it  
will go.  
Remote controller  
Never try to take the remote controller  
• After using the projector, unplug it from the  
power outlet.  
apart or modify it in any way. Doing so  
creates the risk of electric shock, burn  
injury, and other personal injury. Be sure  
to leave all internal inspection,  
adjustment, and repair up to your original  
dealer or authorized CASIO service  
center.  
!
• Unplug the projector from the power outlet if you  
do not plan to use it for a long time.  
• At least once a year, unplug the power plug and  
use a dry cloth or vacuum cleaner to clear dust  
from the area around the prongs of the power  
plug.  
• Never use detergent to clean the power cord,  
especially the power plug and jack.  
• Before moving the projector, be sure to turn it off  
and unplug it from the power outlet first.  
Never allow the remote controller to  
become wet. Water creates the risk of fire  
and electric shock.  
+
Radio waves emitted by the wireless  
adapter (which is provided with some Backup of important data  
projector models)  
Be sure to keep separate written records  
of all data stored in projector memory.  
Memory data can be lost due to  
Never use this product inside of an  
+
aircraft or medical facility, or in any other  
location where use of such devices is  
prohibited. Radio waves can have an  
effect on the operation of electronic  
equipment and medical equipment, and  
cause accidents.  
Do not use this product in the vicinity of  
high-precision electronic instruments or  
electronic devices that handle weak radio  
signals. Radio waves can have an effect  
on the operation of such equipment, and  
cause accidents.  
-
-
breakdown, maintenance, etc.  
During projection, make sure there is  
nothing in front of the lens blocking  
the light.  
An object in front of the lens creates the risk of fire.  
Lens effect  
Never have an aquarium or any other object that  
produces a lens effect in front of the projector  
while the light source unit is on. Such an object  
creates the risk of fire.  
• If you are using a pace maker or any other  
electronic medical device, be sure to consult  
your physician or device manufacturer before  
using this product.  
Lens  
Never touch the lens with your hand.  
Wireless adapter (provided with some  
projector models)  
Keep the wireless adapter out of the  
reach of small children. Accidental  
swallowing of a wireless adapter can  
interfere with proper breathing and create  
a life-threatening situation.  
-
E-4  
 
Safety Precautions  
Battery Precautions  
Lens Cover  
(XJ-ST145 and XJ-ST155 only)  
*Danger  
*Warning  
Should liquid leaking from an alkaline  
battery get into the eyes, immediately take  
the following steps.  
The lens cover of this Data Projector uses  
a magnetic attachment. Because of this,  
it should not be used in the vicinity of  
anyone wearing a pacemaker or any  
other electric medical device. Should any  
problem arise, move the lens cover away  
from the person experiencing the  
+
+
Do not rub the eyes! Wash the eyes with clean  
water.  
Contact a physician immediately. Failure to  
take immediate action can lead to loss of  
eyesight.  
1.  
2.  
problem and consult a physician.  
*Warning  
*Caution  
Misuse of batteries can cause them to leak and  
stain the area around them, or to explode, creating  
the risk of fire and personal injury. Make sure that  
you always observe the following precautions.  
• Never try to take batteries apart and do  
not allow them to become shorted.  
Keep the lens cover away from floppy  
disks, magnetic cards, magnetic tapes,  
prepaid cards, checks, and any other  
media that uses magnetic recording. The  
lens cover can corrupt data recorded on  
magnetic media.  
-
-
• Never expose batteries to heat or throw  
them into fire.  
• Never mix old batteries and new ones.  
• Never mix batteries of different types.  
• Never try to charge batteries.  
Other  
*Caution  
• Take care that batteries are oriented  
correctly when you load them.  
Allowing dust to build up inside the projector for  
long periods without cleaning creates the risk of  
fire and breakdown. Contact your original dealer or  
authorized CASIO service center once a year about  
having the interior of the projector cleaned. Note  
that you will be charged for cleaning.  
+
*
Caution  
Misuse of batteries can cause them to leak and  
stain the area around them, or to explode, creating  
the risk of fire and personal injury. Make sure that  
you always observe the following precaution.  
• Use only the type of batteries that is  
specified for the remote controller.  
-
Dead batteries  
Be sure to remove batteries from the remote  
controller as soon as they go dead.  
• Remove batteries from the remote  
controller if you do not plan to use it for a  
+
Disposing of batteries  
long time.  
Make sure that you dispose of used batteries in  
accordance with the rules and regulations in your  
local area.  
E-5  
 
Safety Precautions  
The normal minimum age for viewing 3D  
images is six. When 3D images are being  
watched by a small child, a competent  
adult should be on hand to monitor the  
child, to ensure that the 3D images are  
suitable for the child, that the child does  
not watch the 3D images for too long an  
uninterrupted period, etc.  
3D Glasses  
+
*Warning  
3D images should not be viewed by the  
types of individuals described below.  
Doing so creates the risk of loss of  
health.  
-
• Individuals with heart disease  
• Individuals with a history of photodermatosis  
• Individuals with epileptic tendencies  
*Caution  
Do not view 3D images if you are  
experiencing any of the symptoms  
described below.  
-
• When you are in poor physical condition  
• When you feel you are losing your health  
• Should you ever experience fatigue, loss of  
health, or abnormal feelings while watching 3D  
images, stop watching. Continued watching  
could damage your health.  
• Should the 3D image ever start appearing double  
or lose its three-dimensionality, stop watching.  
Continued watching can cause eye fatigue.  
Avoid watching 3D images for very long  
periods. Doing so can cause eye fatigue.  
-
Be sure to observe the following  
precautions when watching 3D images.  
+
Take care about nearby people and  
objects.  
Viewing 3D images can interfere with distance  
judgment, so you should take care about nearby  
people and objects when extending your arms or  
making sudden movements. Failure to do so  
creates the risk of material damage and personal  
injury.  
Use 3D glasses when viewing 3D  
images.  
Watching 3D images without 3D glasses can cause  
eye fatigue. Always use the specified 3D glasses  
whenever viewing 3D images.  
You need to wear your glasses or any  
other devices you normally use for  
vision correction.  
If you normally wear glasses or contact lenses, you  
should be wearing them when you watch 3D  
images with the 3D glasses. Failure to do so  
creates the risk of eye fatigue or abnormal vision.  
E-6  
 
Operating Precautions  
About the Light Source Unit  
z The projector’s light source unit uses a laser and LED.  
z The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on  
use conditions, the settings configured on the setup menu, and differences between each individual  
light source unit.  
z The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours,  
whichever comes first.  
z The failure of the light source unit to light or a noticeable drop in light source unit brightness indicates  
the end of the light source unit’s life. Contact your original dealer or authorized CASIO service center  
for replacement. Note that problems caused by unauthorized projector disassembly or modification  
are not covered by the warranty and are not eligible for repair by CASIO.  
Laser Precautions  
This projector is a Class 1 laser device that conforms with IEC 60825-1.  
z This projector has a built-in laser module. Disassembly or modification is very dangerous and should  
never be attempted.  
z Any operation or adjustment not specifically instructed by the user’s guide creates the risk of  
hazardous laser radiation exposure.  
Bottom  
E-7  
 
Operating Precautions  
Other Precautions  
This projector is made of precision components. Failure to observe the following precautions can result  
in inability to correctly save data and malfunction.  
Never use or store the projector in the following locations. Doing so creates the  
risk of malfunction of and damage to the projector.  
z Locations subjected to electrostatic charge  
z Locations subjected to temperature extremes  
z Locations where there is extreme moisture  
z Locations subjected to sudden temperature changes  
z Locations where there is a lot of dust  
z On a shaky, slanted, or otherwise unstable surface  
z Locations where there is the danger of getting wet  
Avoid using the projector under the following conditions. Such conditions  
create the risk of malfunction of and damage to the projector.  
z Avoid areas subject to temperature extremes (operating temperature  
range is 5°C to 35°C (41°F to 95°F)).  
z Never place heavy objects on the projector or climb on top of the  
projector.  
z Never insert or allow foreign objects to drop into the projector.  
z Never place a vase or any other container of water on top of the  
projector.  
Whenever setting the projector down or performing any operation that involves  
moving or reorienting it, take care that you do not pinch your fingers under the  
projector.  
Never leave a dead battery inside the remote controller for a long time.  
A dead battery can leak, which leads to malfunction of and damage to the remote controller.  
Clean with a soft, dry cloth.  
When very dirty, use a soft cloth that has been dampened in a weak solution of water and a mild neutral  
detergent. Wring all excess water from the cloth before wiping. Never use thinner, benzine, or any other  
volatile agent to clean the projector. Doing so can remove its markings and cause staining of the case.  
Missing Screen Dots  
Though this projector is manufactured using the most advanced digital technology available today, some  
of the dots on the screen may be missing. This is normal, and does not indicate malfunction.  
Never subject the projector to strong impact while it is projecting.  
If the projector is accidentally subjected to strong impact, the projection image will momentarily go  
blank. The image will reappear after some time, but it may be the wrong color or it may be accompanied  
by an error message.  
If the projected image is the wrong color, re-select the current input source. If this does not return the  
projected image to its proper color, turn projector power off and then back on again.  
If the image reappears with an error message, correct the problem in accordance with the indicator  
explanations under “Error Indicators and Warning Messages” in the “User’s Guide”  
(UsersGuide_English.pdf).  
E-8  
 
Operating Precautions  
Keystone Correction and Image Quality  
Performing keystone correction causes the image to be compressed before it is projected. This can  
result distortion of the image or a loss of image quality. If this happens, change orientation of the  
projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the  
Projector” in the “User’s Guide” (UsersGuide_English.pdf).  
If image quality is the highest priority, turn off auto keystone correction and position the projector so it is  
pointed straight at the screen.  
Use Not Covered by the Warranty  
Even if your projector is still within the warranty period, you will be charged for repair if a problem is due  
to running the projector non-stop for very long periods (like 24 hours), if there are any objects within  
30cm of the projector while it is running, or if the projector was set up and used without following the  
“Setup Precautions” in the “User’s Guide” (UsersGuide_English.pdf).  
Precaution when Handling the Projector after Use  
The projector’s front intake-exhaust vents and the area around  
the vents become very hot during operation, and will still be hot  
immediately after turning off the projector. Because of this, you  
should hold the sides of the projector as shown in the  
illustration whenever moving it.  
Stowing the Projector in the Carrying Bag  
Make sure the projector is no longer warm before stowing it in the carrying bag.  
Cleaning the Projector  
z Periodically clean the projector exterior, lens, intake vents, and intake-exhaust vents on a regular  
basis.  
z Dust and dirt tend to collect around the vents. Because of this, you should use a vacuum cleaner to  
clean away accumulated dust and dirt periodically.  
z Continued use of the projector after dust has accumulated around the vents can cause overheating of  
internal components and lead to malfunction.  
E-9  
 
General Guide  
CLASS 1 LASER PRODUCT  
z XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-H2600/XJ-H2650  
[P] (Power) key  
Control panel  
Indicators  
Brightness sensor  
Intake vents  
Intake-exhaust vents  
Speaker  
Lens cover*  
Projection lens  
Lens cover strap  
Focus ring  
Zoom ring  
Intake-exhaust vents  
Intake-exhaust vents  
* To remove the lens cover, insert  
your fingers into its recesses and  
squeeze towards the middle.  
Remote control signal receiver  
z XJ-ST145/XJ-ST155  
[P] (Power) key  
Control panel  
Indicators  
Brightness sensor  
Intake vents  
Intake-exhaust vents  
Speaker  
Lens cover*  
Projection lens  
Focus ring  
Intake-exhaust vents  
Intake-exhaust vents  
Remote control signal receiver  
* The lens cover is held in place by a  
magnet. Simply pull it towards you  
to remove it.  
E-10  
 
Quick Guide  
This section explains the operational flow up to the point that projection is started.  
For more individual operations, see the “User’s Guide” (UsersGuide_English.pdf).  
1. Load batteries into the remote controller.  
“Loading Remote Controller Batteries” (User’s Guide)  
2. Place the projector onto a table, desk, or stand that is level and firm, making sure  
that you allow enough room around it.  
“Setting Up the Projector”, “Setup Precautions” (User’s Guide)  
z Also, be sure to read the “Safety Precautions” (page E-1) and the “Operating Precautions” (page  
E-7).  
3. Adjust the vertical angle of the  
2
1
projector.  
1Lift up the front of the projector and press the  
release button. This causes the front foot to  
drop from the bottom of the projector.  
2While holding down the release button, raise  
and lower the front of the projector. When the  
front foot is the height you want, release the  
release button. The front foot will lock at that  
position.  
3Make fine adjustments to the horizontal tilt of  
the projector by rotating the rear feet.  
3
4. Use the supplied power cord to plug the projector into a power outlet.  
5. Connect the projector to an image output device and then turn on the device.  
“Connecting to an Image Output Device” (User’s Guide)  
6. Remove the projector lens cover.  
7. Press the [P] (Power) key to turn on the projector.  
z The first time you turn on the projector, a “Language” window will appear in the center of the  
projection screen. Select the language you want.  
8. Use the [INPUT] key to select the input source.  
“Selecting the Input Source” (User’s Guide)  
9. Use the zoom ring of the projector’s lens to adjust the size of the projected image  
(XJ-H1600, XJ-H1650, XJ-H1700, XJ-H1750, XJ-H2600 and XJ-H2650 only).  
10. Use the focus ring to adjust the focus.  
11. After you finish projecting, press the [P] (Power) key.  
z This will cause a power down confirmation message to appear. Press the [P] (Power) key again  
to turn off the projector.  
NOTE  
z This product is also designed for IT power distribution system with phase-to-phase voltage 230V.  
E-11  
 
Quick Guide  
If you run into problems...  
If you experience any problems while operating the projector or if you suspect that the projector is not  
operating properly, refer to the “Troubleshooting” section in the “User’s Guide”  
(UsersGuide_English.pdf).  
E-12  
 
Main Specifications  
XJ-H1600/  
XJ-H1650  
XJ-H1700/  
XJ-H1750  
XJ-H2600/  
XJ-H2650  
Model Name  
XJ-ST145  
XJ-ST155  
Brightness  
(ANSI Lumens)  
3500  
4000  
3500  
2500  
3000  
Operating Temperature: 5 to 35°C (41 to 95°F)  
Operating Humidity: 20 to 80% (non-condensation)  
Environment  
Operating Altitude: 0 to 3,000 meters (0 to 10,000 feet) above sea level  
Requirements 100-240V AC,  
50/60Hz, 5.1A-2.2A  
Requirements 100-240V AC,  
50/60Hz, 5.1A-2.2A  
Power  
Approximate  
Dimensions  
400 (W) × 323 (D) × 106 (H) mm  
(15.7" × 12.7" × 4.2")  
420 (W) × 323 (D) × 106 (H) mm  
(16.5" × 12.7" × 4.2")  
Weight  
Approximately 7.1kg (15.7Ibs)  
Approximately 7.1kg (15.7Ibs)  
Specifications are subject to change without notice.  
GPL and LGPL (for USB port model users)  
(1) This product uses software (This Software) that comes under the GNU General Public License  
(GPL) and GNU Lesser General Public License (LGPL). In accordance with the GPL and LGPL, the  
source code of This Software is open source code. Anyone who wishes to view the open source  
code can do so by downloading it from the CASIO Projector download site. Whenever copying,  
modifying, or distributing This Software, be sure to do so in accordance with the terms and  
conditions of the GPL and LGPL.  
(2) This Software is provided “as is” without expressed or implied warranty of any kind. However, this  
disclaimer does not affect the terms and conditions of the warranty of the product itself (including  
malfunctions due to This Software).  
(3) The full text of the GPL and LGPL that covers this software can be found at the back of the “USB  
Function Guide”. The “USB Function Guide” for this projector is included with the files that you  
download from the website whose URL is provided on the cover of this manual.  
z DLP is a registered trademark of Texas Instruments Incorporated of the United States.  
z Microsoft, Windows, Windows Vista, and PowerPoint are registered trademarks or trademarks of Microsoft  
Corporation in the United States and other countries.  
z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of  
HDMI Licensing, LLC.  
z Apple and Macintosh are registered trademarks of Apple Inc. of the United States.  
z Adobe and Reader are registered trademarks of Adobe Systems Incorporated.  
z XGA is a registered trademark of IBM Corporation of the United States.  
z ArcSoft and the ArcSoft logo are trademarks or registered trademarks of ArcSoft, Inc. in the United States  
and other countries.  
z Other company and product names may be registered trademarks or trademarks of their respective  
owners.  
E-13  
 
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not  
applicable to other areas).  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communication. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
z
z
z
z
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC WARNING  
Changes or modifications not expressly approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Proper connectors must be used for connection to host computer and/or peripherals in order to meet  
FCC emission limits.  
Connector cable....XJ-H1600/H1650/H1700/H1750/H2600/H2650/ST145/ST155 unit to PC  
Declaration of Conformity  
Model Number: XJ-H1600/H1650/H1700/H1750/H2600/H2650/ST145/ST155  
Trade Name: CASIO COMPUTER CO., LTD.  
Responsible party: CASIO AMERICA, INC.  
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801  
Telephone number: 973-361-5400  
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
 
FCC Information  
This device, IEEE 802.11g Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received; including interference that may cause undesired operation.  
Federal Communications Commission (FCC) Statement  
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and receiver.  
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
— Consult the dealer or an experienced radio/TV technician for help.  
Warning: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user authority to operate the  
equipment.  
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.  
FCC RF Radiation Exposure Statement:  
1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment,  
under 47 CFR 2.1093 paragraph (d)(2).  
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  
The IEEE 802.11g Wireless LAN USB Adapter has been tested to the FCC exposure requirements (Specific  
Absorbtion Rate).  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
FOR CALIFORNIA USA ONLY  
Perchlorate Material – special handling may apply.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
 
Manufacturer:  
CASIO COMPUTER CO., LTD.  
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan  
Responsible within the European Union:  
CASIO EUROPE GmbH  
Casio-Platz 1, 22848 Norderstedt, Germany  
 
Printed in China  
Imprimé en Chine  
MA1202-A  
PH839-4001-00  
 

Bosch Appliances Blender MMB 1000 UC User Manual
Brocade Communications Systems Switch IPMC5000PEF User Manual
Bushnell Telescope 3 REFLECTOR User Manual
Calphalon Slow Cooker HE400SC User Manual
Canon Camera Lens 2529A004 User Manual
Canon Fax Machine B820 User Manual
Casio Digital Camera EX S 880 User Manual
Casio Home Security System YC400 User Manual
Chamberlain Intercom System RFDI User Manual
Chicago Electric Power Hammer 92880 User Manual