Casio Electronic Keyboard CDP 120 User Manual

ES  
USER’S GUIDE  
Please keep all information for future reference.  
Safety Precautions  
Before trying to use the Digital Piano, be sure to read  
the separate “Safety Precautions”.  
GUÍA DEL USUARIO  
Guarde toda la información para futuras consultas.  
Precauciones de seguridad  
Antes de intentar usar el piano digital, asegúrese de  
leer las “Precauciones de seguridad” separadas.  
CDP120-ES-1A  
 
Important!  
Please note the following important information before using this product.  
• Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully  
check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is  
seriously damaged.  
• The product is not intended for children under 3 years.  
• Use only CASIO AD-A12150LW adaptor.  
• The AC adaptor is not a toy.  
• Be sure to disconnect the AC adaptor before cleaning the product.  
This mark applies in EU countries only.  
Manufacturer:  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan  
Responsible within the European Union:  
CASIO EUROPE GmbH  
Casio-Platz 1, 22848 Norderstedt, Germany  
Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal  
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.  
IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,  
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE  
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
The contents of this manual are subject to change without notice.  
The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.  
Company and product names used in this manual may be registered trademarks of others.  
E-1  
 
Contents  
General Guide............................. E-3  
Getting Ready to Play ................ E-4  
Preparing the Music Stand.................................E-4  
Connecting a Pedal Unit.....................................E-4  
Power Supply .....................................................E-4  
Playing the Digital Piano............ E-5  
Turning on Power and Playing ...........................E-5  
Using Headphones.............................................E-5  
Using a Damper Pedal .......................................E-6  
Changing Keyboard Response to  
Touch Pressure (Touch Response)....................E-6  
Select from a variety of  
musical instrument sounds.................................E-7  
Playing Tone Demo Songs.................................E-7  
Layering Two Tones...........................................E-7  
Using Reverb......................................................E-7  
Using Chorus......................................................E-8  
Changing the Pitch (Transpose, Tuning)............E-8  
Connecting External Devices.... E-9  
Connecting a Computer .....................................E-9  
MIDI Settings....................................................E-10  
Outputting Keyboard Notes to  
Audio Equipment ..............................................E-10  
Reference .................................. E-11  
Troubleshooting................................................E-11  
Specifications ...................................................E-12  
Operating Precautions......................................E-13  
MIDI Implementation Chart  
Included Accessories  
Separately Available Accessories  
• You can get information about accessories that  
are separately for this product from the CASIO  
catalog available from your retailer, and from the  
CASIO website at the following URL.  
Music Stand  
Pedal  
Leaflets  
• Safety Precautions  
• Other (Warranty, etc.)  
Items included as accessories are subject to change without notice.  
E-2  
 
General Guide  
• In this manual, the term “Digital Piano” refers to the CDP-120.  
• In this manual, buttons and other controllers are identified using the numbers shown below.  
1
2 3 4 5 6 7 8  
9
9
Back  
bk  
bl  
bm  
8STRINGS button E-7  
bn  
1VOLUME knob E-5  
2POWER button E-5  
9Speakers  
3DEMO, FUNCTION button E-6, 7  
4GRAND PIANO 1 button E-7  
5GRAND PIANO 2 button E-7  
6ELEC PIANO button E-7  
7HARPSICHORD button E-7  
bkUSB port E-9  
blDAMPER PEDAL jack E-4  
bmDC 12V terminal E-4  
bnPHONES/OUTPUT jack E-5  
E-3  
 
Getting Ready to Play  
Preparing the Music Stand  
Power Supply  
Your Digital Piano runs on standard household power. Be  
sure to turn off power whenever you are not using the Digital  
Piano.  
Music stand  
Using the AC Adaptor  
Use only the AC adaptor (JEITA Standard, with unified  
polarity plug) that comes with this Digital Piano. Use of a  
different type of AC adaptor can cause malfunction of the  
Digital Piano.  
Specified AC Adaptor: AD-A12150LW  
Connecting a Pedal Unit  
• Use the supplied power cord to connect the AC adaptor as  
shown in the illustration below.  
Household power outlet  
AC adaptor  
DAMPER PEDAL jack  
DC 12V terminal  
Power cord  
Note the following important precautions to avoid  
damage to the power cord.  
During Use  
• Never pull on the cord with excessive force.  
• Never repeatedly pull on the cord.  
• Never twist the cord at the base of the plug or connector.  
During Movement  
• Before moving the Digital Piano, be sure to unplug the AC  
adaptor from the power outlet.  
During Storage  
• Loop and bundle the power cord, but never wind it around  
the AC adaptor.  
• Never connect the AC adaptor (JEITA Standard, with  
unified polarity plug) that comes with this Digital Piano  
to any other device besides this Digital Piano. Doing so  
creates the risk of malfunction.  
• Make sure the Digital Piano is turned off before  
plugging in or unplugging the AC adaptor.  
• The AC adaptor will become warm to the touch after  
very long use. This is normal and does not indicate  
malfunction.  
E-4  
 
Playing the Digital Piano  
1
2
3 4 5 6 7 8  
Turning on Power and Playing  
Using Headphones  
Using headphones cuts off output from the built-in speakers,  
which means you can practice playing even late at night  
without disturbing others.  
• Be sure to turn down the volume level before connecting  
headphones.  
1.  
Press 2.  
This turns on power.  
• To turn off the Digital Piano, press 2 again.  
2.  
Try playing something on the keyboard. Use 1  
to adjust volume.  
PHONES/OUTPUT jack  
• Turning off the Digital Piano causes most current  
settings to be cleared. The Digital Piano will revert to  
initial settings the next time you turn it on.  
Once you turn it on it remains on until you turn it off  
again.  
• Headphones do not come with the Digital Piano.  
• Use commercially available headphones. See page E-2 for  
information about options.  
• Do not listen to very high volume output over  
headphones for long period. Doing so creates the risk  
of hearing damage.  
• If you are using headphones that require an adaptor  
plug, make sure you do not leave the adaptor plugged  
in when removing the headphones.  
Auto Power Off  
If you do not perform any operation for 30 minutes, the Digital  
Piano will turn off automatically.  
Disabling Auto Power Off  
You can disable Auto Power Off to ensure that power is not  
turned off automatically during a concert, etc.  
1.  
While holding down 8, turn on power.  
Auto Power Off will be disabled.  
E-5  
 
Playing the Digital Piano  
Changing Touch Response Sensitivity  
Using a Damper Pedal  
Use the procedure below to control how much the volume of  
played notes change in accordance with playing speed.  
Select the setting that best matches your playing style.  
Connecting a pedal to the DAMPER PEDAL jack makes it  
possible to use the pedal as a damper pedal (page E-4).  
Pressing the damper pedal while playing will cause the notes  
you play to reverberate for a very long time.  
1.  
While holding down 3, press one of the keys  
in the TOUCH RESPONSE area of the keyboard  
Changing Keyboard Response to  
Touch Pressure  
to specify the Touch Response sensitivity.  
(Touch Response)  
Touch Response alters tone volume in accordance with  
keyboard pressure (speed). This provides you some of the  
same expressivity you get on an acoustic piano.  
Pressing fast produces  
louder notes.  
Pressing slowly produces  
softer notes.  
Off (OFF)  
Touch Response is turned off. Sound  
volume is fixed, regardless of key press  
speed.  
Type1 (1)  
Normal Touch Response  
Type2 (2)  
Type3 (3)  
More sensitive Touch Response than Type 1  
Less sensitive Touch Response than Type 1  
Do not try to use too much  
pressure.  
• The initial default Touch Sensitivity setting is Type1.  
E-6  
 
Playing the Digital Piano  
Select from a variety of musical  
instrument sounds  
Your Digital Piano lets you select from among five different  
types of tones. Even the same song sound takes on a  
different feel by changing the instrument type.  
Layering Two Tones  
You can use the following procedure to layer two different  
tones (such as piano and strings) so they sound  
simultaneously when you press a keyboard key.  
1.  
Simultaneously press two buttons from 4  
through 8 that correspond to the two tones  
To select an instrument for playing  
you want to layer.  
1.  
Press a button from 4 through 8 that  
corresponds to the tone you want to select.  
• The initial default tone setting is GRAND PIANO 1.  
2. Play something on the keyboard.  
Both tones sound at the same time.  
3. To unlayer the tones and return the keyboard to  
2. Try playing something on the keyboard.  
a single tone, press any one of the buttons from  
The tone of the instrument you selected will sound.  
4 through 8.  
Using Reverb  
Reverb adds reverberation to notes. You can change the  
duration of the reverb.  
1.  
While holding down 3, press a key within the  
REVERB area of the keyboard to adjust the  
reverb length.  
Playing Tone Demo Songs  
Your Digital Piano comes with five built-in demo tunes, which  
demonstrate the characteristics of each of the five tones.  
Tone Name  
Tune Name  
GRAND PIANO 1  
GRAND PIANO 2  
ELEC PIANO  
HARPSICHORD  
STRINGS  
Prélude [Suite bergamasque]  
Étude Op.25-9 “Butterflies”  
Original  
Gavotte [Französische Suite 5]  
Nessun Dorma [Turandot]  
1.  
Press 3.  
This will start playback of the demo songs.  
• Pressing a tone button (4 through 8) while demo  
song playback is in progress will switch to the demo  
song of that tone.  
OFF  
1 to 10  
Turns off reverb.  
Press 3 again to stop playback.  
The larger the number selected, the longer  
the reverb duration.  
2.  
Playback of the demo songs will continue in an endless  
loop until you press 3 to stop it.  
• The initial default reverb setting is 6.  
E-7  
 
Playing the Digital Piano  
1.  
While holding down 3, press the minus (–) or  
Using Chorus  
plus (+) key within the TRANSPOSE area of the  
Chorus is a function that adds depth and breadth to notes. It  
makes you sound as if you are playing multiple instruments.  
keyboard to change the setting.  
• Each press of a key increases or decreases the current  
setting by 1.  
• To return to the initial default setting, press the minus  
(–) and plus (+) keys at the same time.  
1.  
While holding down 3, press a key within the  
CHORUS area of the keyboard to select a  
chorus type.  
There are five chorus types, plus an off setting.  
• The actual effect produced by chorus depends on the  
tone you are using.  
Fine Tuning (Tuning)  
Use the tuning feature when you need to adjust the pitch  
slightly to play along with another musical instrument. Also,  
some artists perform their music with slightly altered tuning.  
You can use the tuning feature to adjust tuning so it exactly  
matches a performance on a CD.  
• The tuning feature specifies the frequency of the A4 note.  
You can set a frequency within the range of 415.5 to  
465.9 Hz. The initial default setting is 440.0 Hz.  
The initial default chorus setting is OFF.  
Changing the Pitch  
(Transpose, Tuning)  
Changing the Pitch in Semitone Steps  
(Transpose)  
1.  
While holding down 3, press the minus (–) or  
plus (+) key within the TUNE area of the  
keyboard to change the tuning.  
• Each press of a key increases or decreases the current  
setting by 0.1 Hz.  
The transpose feature lets you change the pitch, in semitone  
steps. A simple operation lets you instantly change the pitch  
to match that of a singer.  
• The transpose setting range is –12 to +12 semitones.  
The initial default transpose setting is 0.  
• To return to the initial default setting (440.0 Hz), press  
the minus (–) and plus (+) keys at the same time.  
E-8  
 
Connecting External Devices  
3
Connecting the Digital Piano to Your  
Computer  
Connecting a Computer  
You can connect the Digital Piano to a computer and  
exchange MIDI data between them. You can send play data  
from the Digital Piano to music software running on your  
computer, or you can send MIDI data from your computer to  
the Digital Piano for playback.  
• Make sure you follow the steps of the procedure below  
exactly. Connecting incorrectly can make data send  
and receive impossible.  
Minimum Computer System Requirements  
1. Turn off the Digital Piano and then start up your  
computer.  
The following shows the minimum computer system  
requirements for sending and receiving MIDI data. Check to  
make sure that your computer complies with these  
requirements before connecting the Digital Piano to it.  
• Do not start up the music software on your computer  
yet!  
2. After starting up your computer, use a  
commercially available USB cable to connect it  
to the Digital Piano.  
• Operating System  
Windows® XP (SP2 or later) *1  
Windows Vista® *2  
Windows® 7 *3  
B connector  
Mac OS® X (10.3.9, 10.4.11, 10.5.8 or later, 10.6.6 or later)  
USB cable  
(A-B type)  
*1: Windows XP Home Edition  
Windows XP Professional (32-bit)  
*2: Windows Vista (32-bit)  
Digital Piano USB port  
A connector  
*3: Windows 7 (32-bit, 64-bit)  
• USB port  
Computer USB port  
• Never connect to a computer that does not conform to  
the above requirements. Doing so can cause problems  
with your computer.  
3. Turn on the Digital Piano.  
• If this is the first time you are connecting the Digital  
Piano to your computer, the driver software required to  
send and receive data will be installed on your  
computer automatically.  
4. Start up your computer’s music software.  
E-9  
 
Connecting External Devices  
5. Configure the music software settings to select  
Local Control  
one of the following as the MIDI device.  
There are times when exchanging data with a computer when  
you may not want the Digital Piano to sound notes you play on  
its keyboard. The local control setting lets you do just that.  
CASIO USB-MIDI: (For Windows 7, Windows Vista,  
Mac OS X)  
USB Audio Device : (For Windows XP)  
1.  
While holding down 3, press a key within the  
• For information about how to select the MIDI device,  
see the user documentation that comes with the music  
software you are using.  
LOCAL area of the keyboard to change the local  
control setting.  
• The initial default local control setting is ON. Selecting  
OFF for this setting disables output from the Digital  
Piano’s speakers.  
• Be sure to turn on the Digital Piano first before starting  
up your computer’s music software.  
• Once you are able to connect successfully, there is no  
problem with leaving the USB cable connected when you  
turn off your computer and/or Digital Piano.  
• This Digital Piano conforms to General MIDI Level 1 (GM).  
• For detailed specifications and connections that apply to  
MIDI data send and receive by this Digital Piano, see the  
latest support information provided by the website at the  
following URL.  
MIDI Settings  
Keyboard Channel  
Outputting Keyboard Notes to  
Audio Equipment  
Connection requires commercially available connecting cords,  
supplied by you. The connecting cords should have a stereo  
standard plug on one end and a plug that matches the  
configuration of the external device on the other end.  
A keyboard channel is the channel used for sending Digital  
Piano data to a computer. You can select the channel you  
want for sending Digital Piano data to a computer.  
• The keyboard channel setting range is 01 to 16.  
The initial default keyboard channel setting is 01.  
1.  
While holding down 3, press the minus (–) or  
plus (+) key within the KEYBOARD CH area of  
the keyboard to change the keyboard channel.  
• Each press of a key increases or decreases the current  
setting by 1.  
• To return to the initial default setting (01), press the  
minus (–) and plus (+) keys at the same time.  
• Turn off the external device when making connections.  
After connecting, turn down the Digital Piano and  
external device volume levels whenever turning power  
on or off.  
• After connecting, turn on the Digital Piano and then the  
external device.  
• If keyboard notes sound distorted when they are  
sounded from external audio equipment, lower the  
Digital Piano’s volume setting.  
Stereo standard plug  
Audio equipment, amplifier,  
etc.  
Digital Piano PHONES/OUTPUT jack  
E-10  
 
Reference  
Troubleshooting  
Symptom  
Action  
Included Accessories  
I can’t find something that should be here.  
Power Requirements  
Carefully check inside all of the packing materials.  
Correctly attach the AC adaptor (page E-4).  
Adjust the volume setting (page E-5).  
Power will not turned on.  
Sound  
Nothing happens when I press any keyboard key.  
Notes keep sounding, without stopping.  
Turn power off and then back on to initialize all Digital Piano settings  
(page E-5).  
Some notes are cut off while they are playing.  
The volume or tone setting I made has changed.  
Notes are cut off whenever the number of notes being sounded  
exceeds the maximum polyphony value of 48 (24 for some tones).  
This does not indicate malfunction.  
• Adjust the volume setting (page E-5).  
• Turn power off and then back on to initialize all Digital Piano  
settings (page E-5).  
Output volume does not change even though is  
change my keyboard touch.  
• Change the Touch Response setting (page E-6).  
• Turn power off and then back on to initialize all Digital Piano  
settings (page E-5).  
In certain keyboard ranges, the volume and tone  
quality sound are slightly different from those in other  
keyboard ranges.  
This is due to system limitations. It does not indicate malfunction.  
With some tones, octaves do not change at the far  
ends of the keyboard.  
This is due to system limitations. It does not indicate malfunction.  
The pitch of the notes does not match other  
accompanying instruments or sounds strange when  
played long with other instruments.  
• Check and adjust the transpose (page E-8) and tuning settings  
(page E-8).  
• Turn power off and then back on to initialize all Digital Piano  
settings (page E-5).  
The reverb of notes seems to change suddenly.  
• Check and adjust the reverb setting (page E-7).  
• Turn power off and then back on to initialize all Digital Piano  
settings (page E-5).  
Computer Connection  
I can’t exchange data between the Digital Piano and • Check to make sure that the USB cable is connected to the Digital  
a computer.  
Piano and computer, and that the device is selected correctly with  
your computer’s music software settings (page E-9).  
• Turn off the Digital Piano and then exit the music software on your  
computer. Next, turn the Digital Piano back on and then restart the  
music software on your computer.  
E-11  
 
Reference  
Specifications  
Model  
CDP-120BK  
Keyboard  
88-key piano keyboard  
3 types, Off  
Touch Response  
Maximum Polyphony  
Tones  
48 notes (24 for certain tones)  
Built-in Tones  
Reverb  
5; with layer  
1 to 10, Off  
Chorus  
1 to 5, Off  
Demo Songs  
Other Functions  
Transpose  
5 songs (tone demo songs)  
1 octaves (–12 to +12 semitones)  
Tuning  
A4 = 415.5 to 465.9Hz (Initial Default: 440.0Hz)  
16 multi-timbre received, GM Level 1 standard  
MIDI  
Inputs/Outputs  
USB port  
TYPE B  
Damper Pedal jack  
Phones/Output jack  
Standard jack  
Stereo standard jack  
Output Impedance: 3Ω, Output Voltage: 1.5V (RMS) MAX  
Power Jack  
Power Supply  
AC Adaptor  
Auto Power Off  
Speakers  
12V DC  
AD-A12150LW  
30 minutes after last key operation, Auto Power Off can be disabled.  
(12cm × 6cm oval) × 2  
8W + 8W  
Output  
Power Consumption  
Dimensions  
Weight  
12V = 18W  
1
1
1
132.2 × 28.6 × 12.9cm (52 /16 × 11 /4 × 5 /16 inch)  
Approximately 11.4kg (25.1 lbs)  
• Design and specifications are subject to change without notice.  
E-12  
 
Reference  
Operating Precautions  
Be sure to read and observe the following operating precautions.  
Location  
Avoid the following locations for this product.  
• Areas exposed to direct sunlight and high humidity  
• Areas subjected to temperature extremes  
• Near a radio, TV, video deck, or tuner  
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video  
interference of a nearby device.  
User Maintenance  
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.  
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.  
Wring all excess moisture from the cloth before wiping.  
Included and Optional Accessories  
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric  
shock, and personal injury.  
Weld Lines  
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not  
cracks or scratches.  
Musical Instrument Etiquette  
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the  
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using  
headphones.  
E-13  
 
 
 
This recycle mark indicates that the packaging conforms to  
the environmental protection legislation in Germany.  
Esta marca de reciclaje indica que el empaquetado se  
ajusta a la legislación de protección ambiental en Alemania.  
C
MA1104-A Printed in China  
CDP120-ES-1A  
 

Belkin Computer Drive F5U234 User Manual
Belkin Network Router F5D7230UK4 User Manual
Black Decker Toaster TROS1500B User Manual
Bosch Appliances Security Camera LTC9412 00 User Manual
Bradford White Corp Water Heater U1TW40SFRN User Manual
Bravetti Food Processor BP100 User Manual
Briggs Stratton Portable Generator 01894 1 User Manual
Britax Baby Carrier Britix Marathon User Manual
Channel Plus Camcorder 7400 Bamp;W User Manual
Chief Manufacturing Automobile Accessories 638699 User Manual