Casio Clock Radio 3057 User Manual

MA0607-EA  
Operation Guide 3057  
About This Manual  
Button operations are indicated using the letters shown  
in the illustration.  
Each section of this manual provides you with the  
information you need to perform operations in each  
mode. Further details and technical information can be  
found in the “Reference” section.  
General Guide  
Press C to change from mode to mode.  
In any mode (except when a setting screen is on the display), press B to illuminate  
the display.  
Timekeeping Mode  
World Time Mode  
Stopwatch Mode  
Countdown Timer Mode  
Alarm Mode  
Press  
.
Timekeeping  
World Time  
Use the Timekeeping Mode to set and view the current  
time and date.  
World Time shows the current time in 48 cities (29 time zones) around the world.  
All of the operations in this section are performed in the World Time Mode, which  
you enter by pressing C.  
In the World Time Mode, you can press A to change the display format as shown  
below.  
PM indicator  
Day of week  
Seconds  
Read this before you set the time and date !  
The times displayed in the Timekeeping Mode and World  
Time Mode are linked. Because of this, make sure you  
select a city code for your Home City (the city where you  
normally use the watch) before you set the time and date.  
To view the current Home City code setting, press A  
while in the Timekeeping Mode.  
City code  
Current time in selected city code  
Press  
.
For full information on city codes, see the City Code  
Table.  
Month – Day  
Hour : Minutes  
Month Day  
in selected city code  
Timekeeping Mode time (Hour : Minutes)  
*The Pindicator is not displayed  
for the time displayed in the  
World Time Mode.  
To set the time and date  
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
To view the time for another city code  
2. Press C to move the flashing in the sequence shown  
below to select other settings.  
In the World Time Mode, press D to scroll eastwardly through city codes.  
For full information about city codes, see the City Code Table.  
If the current time shown for a city is wrong, check your Timekeeping Mode time and  
Home City code settings and make the necessary changes.  
Seconds  
Day  
City Code  
DST  
Year  
Hour  
Minutes  
To toggle a city code time between Standard Time and Daylight Saving Time  
1. In the World Time Mode, use D to display the city code  
(time zone) whose Standard Time/Daylight Saving Time  
setting you want to change.  
Month  
12/24-Hour Format  
3. When the setting you want to change is flashing, use D and B to change it as  
described below.  
2. Hold down A for about one second to toggle between  
Daylight Saving Time (  
Standard Time (  
The  
display a city code for which Daylight Saving Time is  
turned on.  
indicator displayed) and  
indicator not displayed).  
Screen To do this:  
Reset the seconds to  
Do this:  
indicator is on the display whenever you  
DST indicator  
Press D.  
Change the city code  
Use D (east) and B (west).  
Press D.  
Note that the DST/Standard Time setting affects only the currently displayed city  
code. Other city codes are not affected.  
In the World Time Mode, you can switch the city code you currently have selected  
as your Timekeeping Mode Home City between Standard Time and DST. The  
setting you select in the World Time Mode will also be applied in the Timekeeping  
Mode.  
Toggle between Daylight Saving Time (  
and Standard Time (  
)
)
Change the hour or minutes  
Toggle between 12-hour (  
Use D (+) and B ().  
Press D.  
) and 24-hour  
(
) timekeeping  
Change the year, month, or day  
Use D (+) and B ().  
Stopwatch  
See Daylight Saving Time (DST)for details about the DST setting.  
4. Press A to exit the setting screen.  
Resetting the seconds to  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
reset to without changing the minutes.  
The stopwatch lets you measure elapsed time, split times,  
and two finishes.  
The display range of the stopwatch is 59 minutes,  
59.99 seconds.  
1/100 second  
while the current count is in the range of 30 to 59  
The stopwatch continues to run, restarting from zero  
after it reaches its limit, until you stop it.  
The stopwatch measurement operation continues even  
if you exit the Stopwatch Mode.  
Exiting the Stopwatch Mode while a split time is frozen  
on the display clears the split time and returns to  
elapsed time measurement.  
All of the operations in this section are performed in the  
Stopwatch Mode, which you enter by pressing C.  
With the 12-hour format, the (PM) indicator appears on the display for times in the  
range of noon to 11:59 p.m. and no indicator appears for times in the range of  
midnight to 11:59 a.m.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without  
any indicator.  
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is  
applied in all modes.  
Minutes  
Seconds  
Timekeeping Mode time  
(Hour : Minutes)  
The year can be set in the range of 2000 to 2099.  
*The Pindicator  
is not displayed for the  
time displayed in  
The watchs built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watchs battery replaced.  
the Stopwatch Mode.  
The day of the week is automatically displayed in accordance with the date (year,  
month, and day) settings.  
To measure times with the stopwatch  
Elapsed Time  
Daylight Saving Time (DST)  
Daylight Saving Time (summer time) advances the time setting by one hour from Standard  
Time. Remember that not all countries or even local areas use Daylight Saving Time.  
Stop  
Re-start  
Stop  
Stop  
Clear  
Clear  
Clear  
Start  
To toggle the Timekeeping Mode time between DST and Standard Time  
Split Time  
Start  
1. In the Timekeeping Mode, hold down A until the  
On/Off status  
seconds start to flash, which indicates the setting  
Split  
(
Split release  
screen.  
displayed)  
2. Press C twice to display the DST setting screen.  
Two Finishes  
Start  
3. Press D to toggle between Daylight Saving Time (  
)
and Standard Time (  
4. Press A to exit the setting screen.  
The indicator is displayed on the Timekeeping  
Mode and Alarm Mode screen while Daylight Saving  
Time is turned on.  
).  
Split  
Stop  
Second runner  
finishes.  
Split release  
Display time of  
second runner.  
First runner  
finishes.  
Display time of  
first runner.  
DST indicator  
1
 
Operation Guide 3057  
City Code Table  
City  
City  
UTC  
Other major cities in same time zone  
Code  
PPG  
HNL  
ANC  
YVR  
Differential  
11.0  
Pago Pago  
Honolulu  
Anchorage  
Vancouver  
10.0  
09.0  
08.0  
Papeete  
Nome  
Las Vegas, Seattle/Tacoma, Dawson City  
SFO San Francisco  
LAX  
DEN  
MEX  
CHI  
Los Angeles  
Denver  
Mexico City  
Chicago  
07.0  
06.0  
El Paso, Edmonton  
Winnipeg, Houston, Dallas/Fort Worth, New Orleans  
MIA  
Miami  
05.0  
Montreal, Detroit, Boston, Panama City, Havana, Lima,  
Bogota  
La Paz, Santiago, Port Of Spain  
NYC  
CCS  
YYT  
New York  
Caracas  
St. Johns  
04.0  
03.5  
03.0  
01.0  
+00.0  
RIO Rio De Janeiro  
RAI  
LIS  
LON  
BCN  
PAR  
MIL  
ROM  
BER  
ATH  
Sao Paulo, Buenos Aires, Brasilia, Montevideo  
Dublin, Casablanca, Dakar, Abidjan  
Praia  
Lisbon  
London  
Barcelona  
Paris  
Milan  
Rome  
Berlin  
Athens  
+01.0  
+02.0  
+03.0  
Amsterdam, Algiers, Hamburg, Frankfurt, Vienna,  
Stockholm, Madrid  
Helsinki, Beirut, Damascus, Cape Town  
JNB Johannesburg  
IST  
CAI  
Istanbul  
Cairo  
JRS  
MOW  
JED  
THR  
DXB  
KBL  
KHI  
MLE  
DEL  
DAC  
RGN  
BKK  
SIN  
Jerusalem  
Moscow  
Jeddah  
Tehran  
Dubai  
Kabul  
Karachi  
Male  
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi  
+03.5  
+04.0  
+04.5  
+05.0  
Shiraz  
Abu Dhabi, Muscat  
Delhi  
Dhaka  
+05.5  
+06.0  
+06.5  
+07.0  
+08.0  
Mumbai, Kolkata, Colombo  
Yangon  
Bangkok  
Singapore  
Hong Kong  
Beijing  
Jakarta, Phnom Penh, Hanoi, Vientiane  
Kuala Lumpur, Taipei, Manila, Perth, Ulaanbaatar  
HKG  
BJS  
SEL  
TYO  
ADL  
GUM  
SYD  
NOU  
WLG  
Seoul  
Tokyo  
+09.0  
Pyongyang  
Adelaide  
Guam  
Sydney  
Noumea  
Wellington  
+09.5  
+10.0  
Darwin  
Melbourne, Rabaul  
+11.0  
+12.0  
Port Vila  
Christchurch, Nadi, Nauru Island  
*Based on data as of June 2006.  
3
 

Blaupunkt Car Stereo System CM 127 User Manual
Boston Acoustics Speaker System TVEEM26B User Manual
Breville Juicer 800JEXL B User Manual
Brother Sewing Machine 885 V12 User Manual
Canon All in One Printer MultiPASSTM C50 User Manual
Carrier Refrigerator 19EA User Manual
Casio Electronic Keyboard MA 170 User Manual
C Crane Portable Radio CCRadio SW User Manual
Chamberlain Garage Door Opener Series 1200 User Manual
Cisco Systems Cordless Telephone 7970G User Manual