Casio Clock MA1211 EA User Manual

MA1211-EA  
Operation Guide ANALOG(MAI)  
Your watch may differ somewhat from the one shown in the illustration.  
Notes  
• Some water resistant models are equipped with a screw lock  
crown.  
• With such models, you must unscrew the crown in the direction  
noted in the illustration to loosen it before you can pull it out. Do  
not pull too forcibly on such crowns.  
• Also note that such watches are not water resistant while their  
crowns are loosened. Be sure to screw the crowns back in as  
far as they will go after making any setting.  
[
Module 5284]  
To set the time  
1. When the second hand is at 12 o’clock, pull out the  
crown to stop it.  
Crown  
2. Set the hands by rotating the crown. Move the  
minute hand four or five minutes past the setting  
you want, and then back them up to the setting.  
3. Push the crown back in on a time signal to resume  
timekeeping.  
[
Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, and 5343]  
To set the time  
First click (Day setting)  
1. When the second hand is at 12 o’clock, pull out the  
crown to the second click to stop it.  
Crown  
(Normal position)  
2. Set the hands by rotating the crown. Move the  
minute hand four or five minutes past the setting  
you want, and then back them up to the setting.  
3. Push the crown back in on a time signal to resume  
timekeeping.  
To set the day  
• Avoid setting the day between 9:00 p.m. and 1:00  
a.m. The day may not change in the following day if  
you do.  
Second click  
(Time setting)  
1. Pull out the crown to the first click.  
2. Set the day by rotating the crown.  
3. Push the crown back in to its normal position.  
[Modules 5125, 5167, 5223, 5237, 5249, and 5339]  
To set the time  
First click  
1. When the second hand is at 12 o’clock, pull out the  
crown to the second click to stop it.  
(Day, day of week setting)  
2. Set the hands by rotating the crown. Move the  
minute hand four or five minutes past the setting  
you want, and then back them up to the setting.  
3. Push the crown back in on a time signal to resume  
timekeeping.  
Crown  
(Normal position)  
To set the day and day of the week  
• Avoid setting the day and day of the week between  
9:00 p.m. and 5:00 a.m. The day and day of the  
week may not change in the following day if you do.  
1. Pull out the crown to the first click.  
Second click  
(Time setting)  
2. Set the day by rotating the crown counterclockwise.  
3. Set the day of the week by rotating the crown clockwise.  
4. Push the crown back in to its normal position.  
• For watch with the elapsed time bezel  
Rotate the elapsed time bezel to align the  
minute hand.  
mark with the  
After certain amount of time elapsed, read the graduation on the  
elapsed time bezel which the minute hand points to.  
The elapsed time is indicated.  
Elapsed time bezel  
Specifications  
Accuracy at normal  
temperature  
(per month)  
Module No.  
Battery type  
Battery life  
5125/5128/5206/  
5207/5237/5249  
20 seconds  
20 seconds  
20 seconds  
SR626SW  
SR920SW  
SR621SW  
Approx. 3 years  
Approx. 5 years  
Approx. 3 years  
5167  
5180/5199/5223/  
5342/5343  
5218/5250  
5284  
20 seconds  
20 seconds  
20 seconds  
SR616SW  
SR521SW  
SR920SW  
Approx. 2 years  
Approx. 2 years  
Approx. 3 years  
5339/5340/5341  
1
 

BenQ Cell Phone S670C User Manual
Blue Microphones Microphone SNOWFLAKE User Manual
Bonavita Coffeemaker BV1500TS User Manual
Bretford Indoor Furnishings RHOMBII User Manual
Briggs Stratton Power Supply 300000 User Manual
Brother Printer MP 21C User Manual
Brother Sewing Machine 885 V60 User Manual
Canon Camera Lens 2540A002 User Manual
Celestron Telescope 80ED User Manual
Chamberlain Garage Door Opener 1255LMCR 2 User Manual