Casio Clock DQD110 User Manual

MA0410-EA  
Operation Guide DQD110/120B  
ILLUSTRATION  
< >  
DQD-120B  
<
>
DQD-110B  
MAX/MIN  
ALARM SET  
MAX/MIN  
MAX/MIN  
ALARM SET  
ALARM SET  
MAX/MIN  
ALARM SET  
WAVE  
DEMO  
WAVE  
DEMO  
WAVE  
DEMO  
WAVE  
DEMO  
SIGNAL ON/OFF  
SET  
RESET  
SIGNAL ON/OFF SET  
RESET  
SIG  
SET  
RESET  
SIG  
SET  
RESET  
A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the  
clock.  
Depending on its model number, the configuration of your clock may differ somewhat from that shown in the  
illustration.  
Alarm Off  
Snooze Alarm On  
Receive indicator  
(Displayed during  
signal reception.)  
Antenna icon  
Wave OK indicator  
PM indicator  
Current time  
(Hour, minutes, seconds)  
DATE  
(month – date)  
Snooze  
on indicator  
Alarm  
on indicator  
Day of the week  
Alarm time  
Current  
temperature  
1
 
Operation Guide DQD110/120B  
Holding down ̅ or ̃ changes the flashing digits at  
USING THE CLOCK 2  
GMT differential  
:0H  
:1H  
:2H  
:3H  
high speed.  
Setting the Time and Date Manually  
Your GMT differential is a value that indicates the time  
difference between your current location and Greenwich  
Mean Time (GMT). You can find out the GMT differential  
of your location by checking the nearby map.  
When using the clock in an area that is outside of the range of the transmitter or in an area where signal  
reception is impossible for some reason, you need to manually adjust the time setting as required.  
1. Press the SET button (6) to cycle through the setting screens as shown below.  
You can set the year in the range of 2000 to 2099.  
The day of the week is set automatically in accordance  
with the date setting.  
Current Time Screen  
Pressing ̅ or ̃ while the Time Setting Screen is on  
the display causes the seconds count to be reset to 00.  
Each press of ̅ or ̃ while the 12-hour/24-hour Setting  
Screen is on the display toggles between  
12-hour and 24-hour timekeeping.  
You can select one of 16 levels for the contrast setting.  
Select the setting that makes the display easy to read.  
While the Temperature Unit Selection Screen is on the  
display, press the ̅ or ̃ button to toggle between  
°C (Celsius) and °F (Fahrenheit).  
GMT Differential Setting Screen  
Temperature Unit Selection Screen  
3. After making the settings you want, use the SET button (6) to display the Current Time Screen.  
The clock automatically returns to the Current Time Screen if you leave a setting screen on the display for about  
three minutes without performing any operation.  
USING THE ALARM 1  
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (4) to  
select the snooze alarm feature.  
Year Setting Screen  
Contrast Adjustment Screen  
Setting the Alarm Time  
Use the Alarm Time Set buttons (3) to set the alarm time.  
Pressing the Alarm Time Set buttons (3) causes the alarm time to appear in place of the date on the display.  
Press to increase the alarm time setting.  
Press to increase the alarm time setting.  
<
>
<
>
DQD-110B  
DQD-120B  
MAX/MIN  
Month and Day Setting Screen  
Time Setting Screen  
12-hour/24hour Setting Screen  
ALARM SET  
ALARM SET  
MAX/MIN  
Press to decrease the alarm time setting.  
Press to decrease the alarm time setting.  
Holding down ̅ or ̃ changes the digits at high speed.  
Turning the Alarm On and Off  
2. While the screen you want is on the display, use the Alarm Time Set buttons (3) to change the digits that are  
flashing.  
Use the Alarm Mode selector (  
4
) on the side of the clock to turn the alarm on and off, and to select the snooze feature.  
Alarm Mode selector  
Description  
Press ̅ to increase the flashing digits.  
Press ̅ to increase the flashing digits.  
The alarm sounds at the preset time for one minute, and seven more times every five  
minutes thereafter. Even if you stop the alarm sound by pressing the SNOOZE/LIGHT  
button ( ), the alarm operation is performed again five minutes later.  
SNOOZE  
<
>
<
>
DQD-110B  
DQD-120B  
The indicator ( ) flashes on the display to indicate that the snooze feature is  
activated.  
ON  
The alarm sounds at the preset time for one minute.  
The alarm does not sound.  
OFF  
Press ̃ to decrease the flashing digits.  
Press ̃ to decrease the flashing digits.  
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (4) is set to ON  
or SNOOZE.  
The alarm sound changes over four levels as it sounds.  
3
 
Operation Guide DQD110/120B  
USING THE ALARM 2  
Stopping the Alarm  
Hourly Time Signal On  
When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the  
snooze feature is turned on, the alarm will sound again in about five minutes.  
To turn off the snooze feature, slide the Alarm Mode selector (4) to OFF.  
Using the Hourly Time Signal  
When turned on, the Hourly Time Signal sounds on the every hour on the hour from  
6:00 a.m. to midnight (19 times per day).  
Press the SIG button (5) to toggle the Hourly Time Signal on and off.  
The SIG indicator indicates that the Hourly Time Signal is turned on.  
THERMOMETER FUNCTIONS  
A built-in sensor measures temperature and shows the measured value on the display.  
The displayed temperature is replaced by LOfor temperatures 20.0°C (4.0°F) and lower, and HIfor  
temperatures 50.0°C (122.0°F) and higher.  
Though temperature readings are displayed up to 0°C (32°F) and greater than 40.1°C (104.1°F), note that such  
readings are actually outside the guaranteed temperature range of this clock.  
Switching between Celsius and Fahrenheit  
See Setting the Time and Date Manuallyfor information about selecting Celsius (°C) or Fahrenheit (°F) as the  
temperature unit.  
High Temperature and Low Temperature Memory  
The following data is stored in memory automatically.  
Current Temperature  
High Temperature  
Low Temperature  
MAX/MIN button (  
)
Holding down the MAX/MIN (2) button for about two seconds starts auto display, which cycles automatically  
between the current, high, and low temperatures. To exit auto display, press the MAX/MIN button (2) again.  
High temperature and low temperature memory is cleared each day at midnight.  
USING THE LIGHT  
Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.  
Important!  
Overuse of the light can shorten battery life.  
BATTERY REPLACEMENT  
Replace batteries whenever the display of the clock becomes dim and difficult to read.  
1. Pressing down lightly on the battery compartment cover, slide it downwards and remove it.  
2. Remove both of the old batteries.  
3. Load two new batteries. Make sure that their positive (+) and negative () ends face in the correct directions. If  
you load batteries incorrectly, they can burst and damage the clock.  
4. Press the RESET button (7). Be sure to press the RESET button (7) after replacing batteries.  
5. Replace the battery compartment cover.  
Battery precautions  
Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician  
immediately.  
Be sure to load the batteries with their positive (+) and negative () ends facing correctly.  
Never mix old and new batteries, or batteries of different brands.  
Never charge the batteries that come with the clock.  
Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin.  
Replace the batteries at least once a year, even if the current batteries are working properly.  
The batteries that come with the clock lose some of their power during transport and storage.  
4
 

BenQ Projector PB2120 User Manual
Bionaire Air Cleaner BAP422RC CN User Manual
Black Decker Food Processor Fp1400 User Manual
Black Decker Rice Cooker RC3203 User Manual
Black Decker Toaster MGD100 User Manual
Bolens Cultivator 769 02280 User Manual
Breville Wok BEW600XL User Manual
Bushnell Binoculars 263230CL User Manual
Bushnell Hunting Equipment 119537C User Manual
Carrier Portable Generator 69UG15 User Manual