Quick Start Guide
Please read this guide before operating this scanner. After you finish reading this guide,
store it in a safe place for future reference.
Table of Contents
Safety Precautions..............................2
Preparing the Scanner ........................4
Package Contents...............................3
Installing the Software.........................5
1
Safety Precautions
Safety Precautions
Make sure to read following precautions before using the scanner and accessories.
Read the "On-Screen Manual" for precautions against product damages.
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. In order to use the scanner safely, always pay attention to these
warnings.
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
WARNING
Fire or electrical shock may result when following acts are carried out.
• Do not place the scanner near flammable liquids such as alcohol or thinners.
• Do not use cables other than the one supplied.
• Do not plug the power cord into outlets with voltages other than the specified voltages.
• Always plug the power cord in all the way.
• Do not plug in /unplug the power cord with wet hands.
• Do not pull or excessively bend the power cord.
• Do not place heavy objects on the power cord.
• Do not twist or tie the power cord.
• Do not connect excessive numbers of plugs into one electrical outlet.
• Do not use multiple extension cords.
• If lightning strikes in your neighborhood, unplug the power cord from the outlet and refrain
from using it.
• When cleaning the scanner, always unplug the power cord. Do not use flammable liquids
such as alcohol, benzene or thinners. Wipe with a soft dry cloth.
• Do not take apart or modify the scanner and supplies.
Unplug the power cord once a month to see if the cord/plug shows anything unusual such as
heat, rust, bent, scratch and split and so on. Unplug the power cord and call for service if
above is observed since they may lead to a fire or an electric shock afterwards.
If you hear unusual noises, see smoke, feel excessive heat, smell anything unusual, drop
metallic part or spill liquid into the scanner, immediately unplug the power cord and call for
service. Continued use of the scanner may result in fire or electrical shock.
2
Package Contents
Package Contents
Scanner and Accessories
Scanner
USB Cable
Power Cord
Setup CD-ROM
Film Guides
Film Guide
(for 35 mm film strip/slide)
(for 120 format film)
Documentation
• Quick Start Guide (this document)
• Additional Documents
3
Preparing the Scanner
Preparing the Scanner
1
2
Peel the shipping tapes off the scanner.
Open the document cover and slide the scanner lock switch toward the unlock mark
).
(
Unlock Mark
• The document cover is locked temporarily at an angle of about 50 degrees.
3
Close the document cover.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, press the ON button to turn the power off, and then
make sure to slide the scanner lock switch toward the lock mark ( ) to fasten the scanning
unit.
4
5
Connect the supplied power cord to the scanner.
Plug the power cord into the electrical outlet.
• Only use the power cord provided with the scanner. Use of other cables may lead to a
malfunction.
• Always attach the power cord to the scanner before plugging into the electrical outlet.
Reversing this order may lead to malfunctions.
4
Installing the Software
Installing the Software
• Quit all applications before installation.
• Log on using an administrator account.
•
•
Internet connection may be required during the installation. Connection fees apply.
Internet connection is required during software installation. Connection fees apply.
1
2
Insert the CD-ROM into the
computer.
If the USB cable is already
connected, unplug it. If a
message appears on the
computer, click Cancel.
Follow the on-screen
instructions to proceed.
To select a language, click
Language.
If the CD-ROM does not autorun:
Double-click (My) Computer > CD-
ROM icon > MSETUP4.EXE.
Double-click the CD-ROM icon on
the desktop.
To complete the installation, follow the on-screen instructions on the computer.
During installation, you will be prompted to connect the USB cable and turn the power on.
After installation is completed, connect the USB cable and turn the power on.
5
Installing the Software
Use the On-Screen Manual on the Computer
For more information about the functions and operation of the software and also the
troubleshooting tips, refer to the "On-Screen Manual". You can start the "On-Screen
Manual" from the Quick Menu.
Starting the On-Screen Manual
1
Start the Quick Menu.
Double-click the Quick Menu shortcut icon on the
desktop.
Click the Quick Menu icon in the Dock.
2
Click the on-screen manual icon on the Quick Menu.
• It requires the installations of the Quick Menu and the "On-Screen Manual".
Types of Document Supported
• A sheet of photo document and CD/DVD
• Several sheets of photo documents and CD/DVD
• Magazine and book
• Films
There are various ways to place documents in accordance with the document type and
number of documents. For details, refer to the "On-Screen Manual".
6
CANON U.S.A. INC.
One Canon Park, Melville, New York 11747 U.S.A.
CANON AUSTRALIA PTY LTD
1 Thomas Holt Drive, North Ryde, NSW 2113, Australia
CANON NEW ZEALAND LIMITED
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
QT5-5859-V02
XXXXXXXX
© CANON INC. 2012
PRINTED IN XXXXXXXX
1
|