Cables to Go Network Card 81632 User Manual

USER GUIDE  
USB TO SERIAL ADAPTER  
Model: 81632  
 
INTRODUCTION  
Thank you for purchasing the USB to Serial Adapter from Cables To Go. Using this product is the fastest  
and easiest way to connect RS-232 serial devices to your computer. Ideal for computers that have no  
serial ports or computers that need additional serial connectivity. Attach PDAs, printers, or any other serial  
device to your computer in just minutes. For longer distance requirements, simply attach the adapter to an  
Active Extension Cable from Cables To Go. We recommend that you read this manual thoroughly and  
retain for future reference.  
2
 
FEATURES  
Connectors: USB-A to DB9 Male  
Use serial devices on computers without serial ports  
Attaches directly to your computer or USB hub  
Supports all RS-232 serial applications  
3
 
SYSTEM REQUIREMENTS  
USB enabled PC  
Windows® 98/98SE/ME/2000/XP/Vista/Windows 7  
4
 
PACKAGE CONTENTS  
USB to Serial Cable  
Driver CD  
User Guide  
5
 
DRIVER INSTALLATION  
Make sure that you install the driver software before plugging the adapter into the USB port for the  
first time.  
Step 1  
Insert the CD into your CD-ROM. The CD should auto-run and a menu should appear. Click the relevant  
product button, and then click the “Install Software” button. Follow the on screen prompts until the  
installation wizard is finished.  
Step 2  
Reboot your PC.  
Step 3  
After the computer boots, plug in the adapter. Windows will find new hardware and install the appropriate  
drivers.  
Note: if the CD does not auto-run or a menu does not appear, click Start, Run, and type  
D:\autorun.exe. Substitute D:\ for the letter of your CD-ROM drive.  
6
 
VERIFY SUCCESSFUL INSTALLATION IN WINDOWS®  
VERIFICATION FOR WINDOWS 98SE/ME  
Step 1  
From the main desktop, double-click My Computer, double-click Control Panel, System, then Device  
Manager.  
Step 2  
You should see a category called Ports (COM & LPT), and a device called USB to Serial Port (COM x)  
(or something similar) where the x represents the COM number assigned to the port by Windows.  
VERIFICATION FOR WINDOWS 2000  
Step 1  
From the main desktop, right-click My Computer, select Properties. Click the Hardware tab, then Device  
Manager.  
Step 2  
You should see a category called Ports (COM & LPT) and a device called Prolific USB-to-Serial (COM x)  
(or something similar) where the x represents the COM number assigned to the port by Windows.  
7
 
VERIFY SUCCESSFUL INSTALLATION IN WINDOWS®  
VERIFICATION FOR WINDOWS XP, VISTA, WINDOWS 7  
Step 1  
From the Start menu, click Control Panel, then System. (Make sure you are in Classic View). Click the  
Hardware tab, then Device Manager.  
Step 2  
You should see a category called Ports (COM & LPT) and a device called Prolific USB-to-Serial (COM x)  
(or something similar) where the x represents the COM number assigned to the port by Windows.  
8
 
DEVICE UNINSTALLATION  
To remove the drivers, go to Add/Remove Programs in Control Panel, and select PL-2303 USB-to-Serial.  
Click Remove.  
9
 
TROUBLESHOOTING  
If you find that the adapter is not communicating after installing the driver try these suggestions.  
Many serial devices and applications cannot work on a COM port higher than 4. If the COM port is higher  
than 4, you should change it to a lower number. You can do this through the Device properties.  
To change this COM number assigned, go to Device Manager under Ports and find the device, as above.  
Right-click that device and select Properties. Click the Port Settings tab. Click the Advanced button.  
You will see a box in the lower left corner to assign a different COM port to the adapter. Please note this  
procedure only works for Win ME, 2000, and XP users.  
If you cannot get the serial device to communicate, make sure the settings on the Properties tab match the  
ones required for your serial device. Also, under Advanced Settings (Advanced button, above) try  
backing down the sliders or disable the FIFO buffers (uncheck the box) altogether.  
Finally, if you still are having communication issues, contact your serial device manufacturer. If our adapter  
shows correctly in Device Manager (per above), it is installed correctly and there may be an issue with your  
serial device or its software settings. You should try to contact the device manufacturer for more  
assistance.  
10  
 
CABLES TO GO™ ONE YEAR WARRANTY  
At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year  
warranty on this device. If you experience problems due to workmanship or material defect for the duration  
of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization  
Cables To Go  
Road 30, Hortonwood Industrial Estate,  
Telford, Shropshire TF1 7AB UK  
0800.328.2916  
11  
 
IMPORTANT SAFETY INFORMATION  
! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the  
specifications in this manual for power level of the unit.  
! Liquid:  
If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit.  
Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the  
product.  
! In case of a storm, it is recommended that you unplug this device from the outlet.  
! Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.  
! THERE ARE NO USER SERVICEABLE PARTS  
Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the  
unit and refer to the warranty information section of this manual.  
©2010 Cables To Go. Microsoft and Vista are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries. This product is not endorsed or manufactured by Microsoft Corporation.  
12  
 
13  
 
For more information on this product or to check for updated drivers,  
manuals or frequently asked questions please visit our website.  
VER. 1.0.1.25.10  
 

BenQ Projector MP625P User Manual
Blackberry Telephone 8330 User Manual
Brother Network Card NC6100H User Manual
Cambridge Audio DVD Player DVD99 User Manual
Campbell Hausfeld Welder WS0900 User Manual
Canon Copier PS NX6000 User Manual
Carrier Heat Pump 50PCH User Manual
Carrier Range 48EZ A User Manual
Char Broil Charcoal Grill 463250510 User Manual
Christie Digital Systems Projector SIM User Manual