®
Bush Hog TOUGH
2346QT Quick Attach Front-Push Loaders
Bush Hog Quick Attach System
®
BUSH HOG TOUGH FeATUreS
TOUGH Boxed Boom Design
TOUGH Large Diameter Cross Tubes
TOUGH robotic Welds
TOUGH High Strength Chrome Plated
Cylinder rods
TOUGH Bush Hog Made Buckets
TOUGH Powder Coat Paint
MODeL
Specifications Based on 1997 ASAE STANDARDS
2346QT
25 - 50
Tractor PTO HP range
2WD/FWA
2WD/FWA
107 inches
101 inches
50°
Maximum Lift Height - Measured at Pivot Pin
Maximum Lift Height - Under Level Bucket
Maximum Dump Angle
Digging Depth
3 inches
1970 lbs
1270 lbs
2200 lbs
1570 lbs
2985 lbs
2005 lbs
2640 lbs
3220 lbs
2145 lbs
4 seconds
2 seconds
4 seconds
2 seconds
Lift Capacity to Maximum Height - At Pivot Pin
Lift Capacity to Maximum Height - 31.5 inches Forward of Pivot Pin
Lift Capacity to 59 inch Height - At Pivot Pin
Lift Capacity to 59 inch Height - 31.5 inches Forward of Pivot Pin
Breakout Force - At Pivot Pin
Breakout Force - 31.5 inches - Forward of Pivot Pin
rollback Force at Maximum Height - 31.5 inches Forward of Pivot Pin
rollback Force at 59 inch Height - 31.5 inches Forward of Pivot Pin
rollback Force at Ground Level - 31.5 inches Forward of Pivot Pin
raising Time (Ground Level to Full Height)
Lowering Time (Full Height to Ground Level)
Bucket Dumping Time (Full Rollback to Full Dump)
Bucket rollback Time (Full Dump to Full Rollback)
Hydraulics
Two 2.0 inch Bore, 22.50 inch Stroke Double Acting Bucket Cylinders and Two 2.0 inch Bore, 23.38 inch Stroke Double Acting Lift Cylinders
Specifications Based on Tractor System of
2450 PSI hyd. Pressure & 9 GPM pump capacity
Available in 48, 60, 72 and 80 inch widths
Bush Hog Quick Attach Buckets
Options
Forklift Attachment (36 inch tines), Round Bale Spear, Bucket Tine Teeth, and Grill Guards
1 year limited warranty
Warranty
FeATUreS
Available in major tractor colors
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 74
|