®
Bush Hog TOUGH
2010 Series Rotary Cutters
BUSH HOG® TOUGH FeaTUReS
TOUGH 5 Year Gearbox Limited Warranty
TOUGH 7 Gauge Sidebands
TOUGH Replaceable Wide Skids
TOUGH Cushioned axle arms
TOUGH Powder Coat Paint
MOdeL
2010
Cutting Width
Cutting Capacity
dimensions (width x length)
Type Hitch
9 ft 9 inches
2 inches
10 ft 3 inches x 9 ft 4 inches (Lift), 10 ft 3 inches x 13 ft (Pull)
3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount Cat. II & III
Cutting Height
deck Thickness
Side Bands
2 to 12 inches
11 gauge
7 gauge x 10 inches
Minimum Tractor HP
driveline
40 PTO (Pull), 60 PTO (Lift)
ASAE Category 4
Cross Shaft
Rubber Element
Gearbox HP
120 Main and 90 Outboard
540/1000 RPM
Tractor PTO Speed
driveline Protection
Height adjustment
Blade Holder(s)
Blades
4 Plate PTO Slip Clutch
Choice of Manual Height Bundle or Hydraulic Cylinder
Round Pans
1/2
x 4 inches - Corner Uplift
Blade Tip Speed
15,778 FPM/540 RPM; 15,708 FPM/1000 RPM
Tires
Laminated Tire on Lift and Semi-Mount Models, Laminted Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tires on Pull Type Only
Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
axles
deflectors
Standard Front Belting and Rear Bands (Chains Optional)
Safety Tow Chain
approximate Weight
Options
Standard for Pull Models
1922 lbs (Lift), 2177 lbs (Pull), 1929 lbs (Semi-Mount)
Single Row Chain Deflectors for Front and Rear
Warranty
1 year limited warranty with a 5 year gearbox limited warranty
•Rear Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields
FeaTUReS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 20
|