4. Check that the appliance is connected to the gas cartridge in a gas tight fashion,
showing no signs of leakage.
operating the adaptor
1. Before lighting the appliance burner, place the appliance down on a firm level
surface and ensure that the pan supports are fully opened out in the cooking
position.
STOVE STAND
2. Open the Flame Adjuster 3/4turn.
3. Turn the Flame Adjuster to desired flame setting. The flame should be blue and
SPeCIfICatIonS
is adjustable.
5. After use, turn the FlameAdjuster OFF. Wait for cooker & adaptor to cool before
disassembling.
Dimensions: (folded)
4.5” x 2.5” x 1.5”
Disassembling the adaptor
1. Make sure the Flame Adjuster is turned OFF and adaptor has cooled. Fold
Flame Adjuster.
Weight: 5.4 oz.
Material: Steel
Warranty: 1 year
2. Turn the adaptor counter clockwise until it releases from the canister. Some gas
may escape while unscrewing the canister.
3. Close the Leg Supports.
Warranty
The Brunton Company warrants this product to be free of defects in workman-
ship and materials for one year. If any such defects are discovered, your product
will be repaired or replaced at the option of The Brunton Company. This war-
ranty does not cover damage caused by accident, misuse, abuse or tampering. A
charge will be assessed to repair such damage.
GeneraL Safety InformatIon
This manual contains important information about the assembly,
use and maintenance of this adapter. Keep this manual for
future reference. Be sure to read this manual completely before
using the Stove Stand adapter. Keep this manual and review it
regularly to maintain awareness of procedures and warnings.
If service should become necessary, contact Customer Service at 1-800-443-4871
for a Return Authorization Number, pack the product in a sturdy container to pre-
vent damage and ship prepaid with insurance to cover loss in transit. Include $20
for shipping and handling and return the product to:
BRUNTON
Attn: Warranty Repair
2255 Brunton court
Riverton, WY 82501 USA
InformatIon for Safety
Warning: Use only in a well ventilated area
1. aLWayS check the connection between the adaptor and the canister and in-
sure it is correctly assembled before operating the adaptor.
LImItS of LIaBILIty
2. Do not light or use indoors, in a tent, vehicle or other enclosed areas. A fire or
carbon monoxide poisoning could cause injury or death.
The Brunton Company assumes no responsibility for any inconvenience, loss,
or injury, direct or consequential damage arising from possession or use of the
goods. This warranty gives you specific legal rights. You may have other legal
rights which may vary from state to state. Check with your local state about your
rights.
3. Do not obstruct the flow of combustion and ventilation air.
4. aLWayS check for leaks before lighting the cooker. If you smell gas, hear hiss-
ing or leaks are found, Do not USe tHe aDaPtor.
5. neVer put your head or body above the adaptor when lighting or burning. Keep
clothing and other materials that may catch fire away from the adaptor. Clearance
to Combustibles: Top 4st/1.2m, Side 1ft/0.3m.
6. Never disconnect the adaptor from the canister when the adaptor is lit, warm
from recent use or near any flame or heat source. If you accidentally leave the
flame adjuster open, ventilate the area before lighting the adaptor.
7. Do not place heavy or large capacity cookware on the cooker. Maximum
weight 8lbs/5kg, Maximum pot diameter 8in/20.3cm. Use on a horizontal surface.
8. neVer leave a burning or hot adaptor unattended.
9. neVer allow children to use adaptor. aLWayS SUPerVISe CHILDren In
tHe VICInIty of tHe aDaPtor.
10. Do not use the adaptor in any other way than is described in these instruc-
tions. Do not alter the adaptor. Do not disassemble beyond what is described
in these instructions. Before taking the adaptor on a trip, check for fuel leaks and
practice using and maintaining it.
STOVE STAND
Warranty registration
Please return within 30 days of purchase
Name: __________________________________________________________
Address: ________________________________________________________
City: ________________ State: _____________ Zip Code :________________
Phone : ______________________ Email: _____________________________
Date Purchased: __________________________________________________
Would you like to receive a Brunton catalog? ( )Yes ( )No
Please let us know where you purchased your Brunton Stove Stand?
Store Name: _____________________________________________________
City: ________________ State: _____________ Zip Code :________________
( ) Online site _________________ ( ) Catalog _________________________
( ) Gift ( ) Brunton ( ) Other ______________________________________
Do you own another Brunton product?
USer manUaL
Before assembly
1. Check to make sure the Flame Adjuster is turned OFF.
2. Check the Adaptor Seal O-ring to be sure it is in place and in good condition.
3. Keep the gas cartridge upright when fitting it to the appliance. Carefully screw
the gas cartridge into the appliance, making sure not to cross-thread the valve.
Hand tighten cartridge to adjuster. Do not over tighten or you may damage the gas
cartridge valve.
( ) Yes. Product: ____________________________
( ) No
|