SPECIFICATION SHEET
QL1 SERIES
4-WAY
CONVERTIBLE
RANGE HOOD
Deluxe features in our smaller shell - offers the
most hood for the money.
TYPICAL SPECIFICATION
Range hood shall be Broan QL1 Series.
FEATURES
Unit shall be convertible between ducted (using a washable
aluminum filter) and non-ducted (using non-ducted filter
BPQTF).
2-speed fan control
•
Polymeric blade and light lens (accepts two 60W bulbs)
•
•
•
Motor to be permanently lubricated.
Washable aluminum filter
Unit shall have a 2-speed fan control with separate 2-level
light switch.
converts to non-ducted by removing cover plate from
control panel and installing the non-ducted filter BPQTF
(purchase separately)
sides shall be mitered and bottom edge hemmed with no
sharp edges.
3¼" x 10" damper/duct connector included
•
•
•
Air delivery shall be no less and sound levels no greater than
shown. All air and sound ratings shall be certified by HVI.
7" round duct adapter plate included
Mitered sides and hemmed bottom for safety,
cleanability and good looks
Unit shall be U.L. listed.
Contemporary styling in White and Biscuit
•
•
Available in 30" width only
SPECIFICATIONS
VOLTS
AMPS
CFM
SONES
DUCT
HIGH NORMAL
HIGH NORMAL
120
120
120
120
1.9
1.9
1.9
1.9
190
190
230
--
100
130
150
--
6.0
6.0
6.0
--
2.0
2.0
2.0
--
3¼" X 10" (H)
3¼" X 10" (V)
7" Round (V)
Non-Ducted
HVI-2100 ceRtIFIeD RAtINgs comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
availabletoconsumers.Productperformanceisratedat0.1in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
70F
99044082A
|