July 2001
model(s) affected
Section 3 - Drills / Drivers
TECHNICAL
BULLETIN
Various
"Recall Notification"
To: AllAuthorizedandFactoryServiceCenters,
FieldSalesandInternalSupportPersonnel
Re: Recall Notification for models 1011VSR (060 1044 639)
1012VSR (060 1044 739)
1031VSR (060 1047 639)
1032VSR (060 1047 739)
1033VSR (060 1048 639)
1034VSR (060 1049 639)
1035VSR (060 1048 739)
1013VSR (060 1045 639)
1014VSR (060 1044 739)
1030VSR (060 1046 639)
Pleaseinsertthisbulletinintothe"TechnicalBulletins"sectionofyourBoschPartsManual,
onlyaftermakinganyadditionsornotestoyourIllustratedPartsList(s).
The above listed models were the subject of a voluntary recall issued in September of 2000. Efforts to
recoverallaffectedtoolsmustcontinueindefinately. Pleasedonotrepairorreturntothecustomeranyof
the models listed above that have manufacturing date codes R081 through R088. Upon receipt of an
affected tool, please call 877-678-1963 (toll free) for tool replacement instructions.
1034VSR
DRILL
Ø13mm(1/2") 120V~ 60Hz 8,0A n 0 - 550/min
o
To reduce the risk of injury, user
must read and understand the
instruction manual.Wear eye protection. If bit jams, tool
may twist out of control, always use side handle. Connect
to grounded outlet.
0601049639
511
C
US
Manufacturing
SN:
Listed 7P37
Date Code Location
S-B POWERTOOL CO. CHICAGO, IL
MADE IN USA
All questions should be directed to your Authorized Service Manager.
ProductServiceDepartment
S-B Power Tool Company Chicago IL 60646-5999
