To prevent accidents and/or machine damage, read these
instructions before installation or use. Use the dryer only as
instructed in this owner’s guide and installation instructions
manual included with your dryer. Keep this guide for future
reference
Front-Loading Dryer
DV 16540 NBL00
Owner’s Guide & Installation Instructions
Please read this manual first!
Dear Customer,
We hope that your product, which has been manufactured in modern facilities and passed
through strict quality control procedures, will give you the best results.
Therefore, we advise you to read this manual thoroughly before using your product and keep it
for future reference.
This operation manual will …
…help you use your machine in a fast and safe way.
• Please read the operating manual before installing and starting your machine.
• Particularly follow the instructions related to safety.
• Keep this operating manual handy. You may need it in the future.
• Please read all additional documentation supplied with this machine.
• Please note that this operation manual may be applicable for several models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this Operation Manual the following symbols are used:
A
Important safety information
This is the general warning sign. It is used to alert the user to potential hazards. All safety
messages that follow this sign shall be obeyed to avoid possible harm to the user.
B
Caution, risk of electric shock
Caution, risk of fire
Caution, hot surface
Read the instructions
Useful information
C
Important information or useful hints for use.
3 - EN
TABLE OF CONTENTS
1 Your Dryer
End of program .................................19
Technical Specifications.....................20
5
Overview .............................................5
5 Quick Start-up Instructions 21
2 Important Safety
Instructions
6
8
6 Maintenance and cleaning 22
Lint filter ............................................22
Sensor ..............................................22
3 Installation Instructions
Electrical connection............................8
Grounding Instructions ........................9
Appropriate installation location ...........9
Minimum Installation Clearances........10
Use on top of a washing machine......10
Adjusting the feet...............................11
Ventilation duct and connection ........11
Destroying packaging material...........12
7 Troubleshooting
23
4 Operating Instructions
13
First Use............................................13
Garments suitable for drying in
the machine.......................................13
Garments unsuitable for drying in
the machine.......................................13
Preparing clothes to be dried.............13
Correct load capacity ........................14
Control panel.....................................15
Loading door.....................................16
Turning on the dryer ..........................16
Program selection..............................16
Starting the Program .........................18
Progress of program..........................18
Changing the program after the
program has started..........................18
Auxiliary functions..............................18
Child-proof lock.................................19
Warning indicators.............................19
4 - EN
1 Your Dryer
Overview
Figure 1
1
2
3
4
Type label
Lint filter
3
4
1
2 Control Panel
Adjustable Feet
Specifications of this appliance may change without notice to improve the quality of the product.
Drawings in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are obtained in the
laboratory in accordance with relevant standards. Depending on operational and environmental
conditions of the appliance, values may vary.
5 - EN
2 Important Safety Instructions
AWARNING:To reduce the risk of fire,
electric shock, or personal injury when
using this appliance, follow the basic
precautions including the following:
BWARNING: Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
representative or personnel if you are
in doubt as to whether the appliance is
properly grounded.
• Read all instructions before using the
appliance. Otherwise, there may be the
risk of personal injury or material damage.
Additionally, any warranty and reliability
commitment will become void.
• Power cord plug must be within easy reach
after installation.
• To reduce the risk of fire or electric shock,
do not use extension cords, multi-plugs or
an adapter to connect the dryer to electrical
mains.
AThis product has been designed for
home use only.
• Do not modify the plug provided with the
appliance: if it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
• The appliance must be operated at
temperatures between +5°C and +35°C.
• The appliance must not be installed behind
a lockable door, a sliding door or a door
with the hinges on the opposite side to that
of the tumble dryer.
• If the power supply cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified persons in
order to avoid an electrical hazard.
• The appliance must not be operated unless
it is repaired! There is the risk of electric
shock!
• Do not install or store this appliance where
it will be exposed to weather.
• Do not tamper with the controls.
• Do not repair or replace any part of the
appliance or attempt any servicing unless
specifically recommended in the user-
maintenance instructions or in published
user-repair instructions that you understand
and have the skills to carry out.
• Ventilation openings in the base must not
be obstructed by carpets, etc.
• Exhaust air must not be discharged into
a flue used for exhausting fumes from
appliances burning gas or other fuels.
• Adequate ventilation must be provided
to avoid the back flow of gases into the
room from appliances burning other fuels,
including open fires.
• Unplug the machine when it is not in use.
• Never wash the appliance with water! There
is the risk of electric shock!
• Never touch the plug with wet hands.
• Never pull from the cable to unplug the
machine.
• Do not dry articles that have been
previously cleaned in, washed in, soaked
in or spotted with gasoline, dry-cleaning
solvents or other flammable or explosive
substances as they give off vapors that
could ignite or explode.
• Do not use the tumble dryer if industrial
chemicals have been used for cleaning.
• Do not dry unwashed items in the tumble
dryer.
• Items that have been soiled with
substances such as cooking oil, acetone,
alcohol, gas, kerosene, spot removers,
turpentine, waxes and wax removers should
be washed in hot water with an extra
amount of detergent before being dried in
the tumble dryer.
• Do not operate the appliance if the power
cord or plug is damaged.
• Never attempt to repair the machine
yourself.
• For malfunctions that cannot be solved by
information in the operating manual: Turn
off and unplug the appliance and call an
authorized service..
• This appliance must be grounded. In
the event of malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for electric current. This
appliance is equipped with a cord having
an equipment-grounding conductor and a
grounded plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with
all local codes and ordinances.
6 - EN
• Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber-
backed articles and clothes or pillows fitted
with foam rubber pads should not be dried
in the tumble dryer.
AWARNING: Never stop the tumble
dryer before the end of the drying cycle
unless all items are quickly removed and
spread out dissipate heat.
• Do not use fabric softeners or products to
eliminate static unless recommended by
the manufacturer of the fabric softener or
product.
• Do not reach into the appliance if the drum
is moving.
• Do not allow children to play on or in the
appliance.
• The appliance may only be used for
the drying of textiles that are marked
accordingly.
• Young children should be supervised
to ensure that they do not play with the
appliance.
• Undergarments that contain metal
reinforcements should not be placed in a
tumble dryer. Damage to the tumble dryer
can result if the metal reinforcement come
loose during drying.
• Before loading check all garments for
lighters, coins, metal pieces, needles, etc.
• Fabric softeners, or similar products, should
be used as specified by the fabric softener’s
instructions. The use of fabric softener
sheets is not recommended.
• Keep pets away from the appliance during
the drying cycle.
• Before the appliance is removed from
service or discarded, remove the door to
the drying compartment.
• Close the loading door when you leave the
area where the machine is located.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they are supervised or have been given
instructions concerning the use of the
appliance by a person responsible for their
safety.
• The final part of a tumble dryer cycle occurs
without heat (the cool-down cycle) to ensure
that the items are left at a temperature that
ensures the items will not be damaged.
• Clean lint filter before or after each load.
• Keep area around the exhaust vent and
adjacent surrounding areas free from the
accumulation of lint, dust, and dirt.
• The interior of the appliance and exhaust
ductwork should be cleaned periodically by
qualified service personnel.
• Never use the dryer without the lint filter.
• At times when your dryer is not in use or
after the laundry is taken out following the
completion of drying process, turn off by
using the On/Off button. In cases when
the On/Off button is on (while the dryer
is energized), keep the door of the dryer
closed.
• For power saving in models with lamps, at
times when your dryer is not in use, keep
the door closed if the On/Off button is
pressed (if the dryer is energized).
7 - EN
3 Installation Instructions
A WARNING- Risk of fire
• The clothes dryer (“appliance‘) installation
must be performed by a qualified installer.
• Install the appliance according to the
manufacturer’s instructions and local codes.
• Do not install a clothes dryer with flexible
plastic venting materials. If flexible metal
(foil type) duct is installed, it must be of a
specific type identified by the appliance
manufacturer as suitable for use with
clothes dryers. Flexible venting materials are
known to collapse, be easily crushed, and
trap lint. These conditions will obstruct the
clothes dryer’s airflow and increase the risk
of fire.
3- wire receptacle
( 10-30R)
Typical 3- Wire Dryer Cord 240V/30 amp
NEMA 10-30 Type SRDT
ATo reduce the risk of severe injury or
AIf the dryer is installed in a mobile home,
recreational vehicles, new branch-circuit
installations or in areas where local codes do
not permit grounding, only a 4-wire power
supply cord shall be used.
death, follow all installation instructions.
SAVETHESE INSTRUCTIONS
Electrical connection
Connect the appliance to a grounded outlet
protected by a fuse or circuit breaker of
suitable capacity.
To change the cord:
1. Make sure that the dryer is not plugged into
any power outlet.
BDO NOT plug end of dryer power cord
into a live receptacle before connecting dryer
power cord to dryer terminals and closing
junction/splitter box as described below.
Dryer shipped with cord to fit this
type 4 -wire receptacle
4-wire receptacle
(14-30R)
BDO NOT repair old power supply cords.
Power cord must be changed only by a
qualified person. There is a risk of electric
shock!
If yo u have 3-wire receptacle, like
this, a 3-wire dryer cord must be
purc hased locally.
2. Remove the screw from the cover of the
junction box located at the top rear of the
dryer.
3. Remove the red, white and black wire from
the terminal block.
3-wire receptacle
(10-30R)
4. Remove the green ground wire from the
ground terminal.
5. Loosen the strain relief clamp holding the
4-wire cable.
3-Wire Electrical Connection
6. Thread the 4-wire cable out through the
strain relief clamp.
If your receptacle is a 3-wire receptacle as
shown below, you must obtain a 3-wire dryer
cord. A dryer cord can usually be found at
your local hardware supply, electrical supply or
home center. Cord should have closed loop or
upturned end wire terminating connectors.
7. Thread the new 3-wire dryer cord through
the strain relief clamp.
8 - EN
8. Attach the power cord Ground conductor
(the center wire) to the terminal labeled N.
Connect the terminal labeled N and the
Ground terminal labeled G with the supplied
short cable. Tighten the terminals so that they
securely hold the conductors.
This appliance is equipped with a cord having
an equipment-grounding conductor and a
grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
9. Attach the two remaining power cord
outer conductors to the 2 terminals labeled
L. Tighten both screws so that the power
conductors are securely held in place.
10. Tighten the strain relief so that the power
cord cannot be moved.
•
Power cord plug must be within easy
reach after installation.
•
The voltage and the allowed fuse/breaker
protection are specified in the section
“Technical Specifications”.
•
•
•
The stated voltage must match your
mains voltage.
11. Replace the cover on the junction box and
fasten in place.
Connection via extension cords or multi-
plugs should not be made.
The main fuse/breaker and switches must
have a contact distance of minimum 3
mm.
B A damaged power cable must be
replaced by a qualified electrician.
A WARNING – Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
representative or personnel if you are
in doubt as to whether the appliance is
properly grounded. Do not modify the
plug provided with the appliance: if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
B The appliance must not be operated
unless it is repaired! There is the risk of
electric shock!
Appropriate installation
location
•
Install your appliance in environments that
have no risk of freezing and in a stable
and level position.
•
•
•
Do not place your appliance on a long pile
rug or on similar surfaces.
The dryer is now ready to be plugged into the
3-wire receptacle of the proper rating.
Operate your appliance in a well-
ventilated, dust-free environment.
Do not block the air ducts in front of and
under the machine.
The receptacle should be located so that the
plug and receptacle will be accessible with the
dryer in its installed position.
B Make sure that your appliance is not
placed on the power cable.
Grounding Instructions
A Keep at least 0.6” (1.5 cm) from the
This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing
a path of least resistance for electric current.
edges of other furniture.
9 - EN
900
900
1
22
”
4
/
341/
2
”
565 mm
min.
(875 mm)
min.
”
211
4
/
331/
2
540 mm
(850 mm)
Ventilation Requirements
Minimum Installation
Clearances
Closet door must have 2 openings, located 3
inches (7.5 cm) from bottom and top of door
each having a minimum area of 60 sq. inches
(375 cm2).
Alcove or Built-under Closet
Use on top of a washing
machine
Sides 1/2” (12.5 mm)
Top 1” (25 mm)
Rear 1” (25 mm)
1/2” (12.5 mm)
•
A stacking-kit (Part no: 296 710 0100)
should be used between the two
machines for use on top of a washing
machine. The stacking-kit should be
installed by the Authorized Service
provider.
1” (25 mm)
1” (25 mm)
•
Place the appliance on a solid floor. If
it is to be placed on top of a washing
machine, the approximate weight
together may reach 397 lbs (180 kg)
10 - EN
when they are full. Therefore, the floor
must be capable of carrying the load
placed on it!
2. Make the duct passages as shown the
picture below.
C
C
C
C
Exhaust of humid air from the dryer into
the room is to be avoided. It may damage
the walls and furniture in the room.
The ventilation duct can be routed
outdoors via a window or it can be
connected to the air outlet in a bathroom.
Air outlet duct must be extended directly
outdoors. There must be a limited number
of elbows to not hinder air flow.
Adjusting the feet
In order to ensure that your
appliance operates more
silently and vibration-free,
it must stand level and
balanced on its feet. The
front feet of the appliance
can be adjusted. Balance
the appliance by adjusting the feet.
1. Loosen the feet by hand.
2. Adjust them until the appliance stands
level and firmly.
To prevent water accumulation in the
duct, make sure it is not folded on the
floor.
C
Do not use any tools to loosen the
adjustable feet. Otherwise, they may be
damaged.
Never unscrew the adjustable feet from
their housings.
A The appliance should not be vented into a
chimney, a wall, a ceiling, or a concealed
space of a building.
A Do not operate the appliance at the same
time with heaters such as a coal or gas
stove. Airflow may cause the chimney to
flare up.
C
2 plastic pieces supplied together with the
Operating Instructions prevent your
appliance from slipping on wet and
slippery surfaces. To install these plastic
parts:
1. Tilt the appliance backwards.
2. Fit the plastic parts to the front adjustable
feet. Press on the plastic parts to fix them
in their places.
3. Check the balance of the appliance
again and readjust the adjustable feet if
necessary.
C
C
Care must be taken not to pinch or bend
the ducts.
The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.
C
The duct shall not be assembled with
screws or other fastening means that
extend inside the duct to catch lint.
Ventilation duct and
connection
Ventilation duct ensures exhaust of air from
inside the appliance.
The vented dryer has 1 air outlet.
A Only rigid or flexible metal duct should
be used for exhausting, unless the
appliance has been checked for use with
nonmetallic duct or the duct has been
checked and found acceptable for use
with clothes dryers.
The diameter of the duct to be used should be
4” (102 mm).
Maximum duct length is given in the table
below:
Metal rigid duct
Maximum length 21 ft (6.5 m) + 2 elbows
To connect a ventilation duct;
1. Connect the air outlet metal duct to the
spacer by turning it counter-clockwise.
11 - EN
Destroying packaging material
Packaging material can be dangerous to
children. Keep the packaging materials out
of the reach of children or dispose of them
accordingly. Do not dispose of them together
with normal domestic waste.
Packaging materials of your appliance are
manufactured from recyclable materials.
12 - EN
4 Operating Instructions
•
•
Do not dry items like woolens, silk
garments and nylon stockings, delicate
embroidered fabrics, garments with metal
accessories and items like sleeping bags
in the machine.
Garments made of delicate and valuable
fabrics as well as lace curtains can be
permanently wrinkled. Do not dry these in
your machine!
AWARNING:To reduce the risk
of fire, electric shock, or personal
injury, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this
appliance.
•
•
•
•
Do not dry items made of hermetic fibers
such as pillows and quilts in the dryer.
Garments made of foam or rubber may
deform.
A B C D
l n m
Do not dry clothes containing rubber in
the machine.
Do not dry clothes exposed to petroleum,
oil, combustible or explosive agents in the
dryer even if they are washed beforehand.
Overly wet laundry or laundry with
dripping water must not be put into the
dryer.
•
Preparing clothes to be dried
o p q
•
•
•
All laundry must be spun at the highest
possible spin speed the washing machine
allows for the textile type.
Laundry may be tangled after washing.
Separate laundry before placing them into
your dryer.
Sort laundry according to their types and
thicknesses. Dry similar types of laundry
together.
First Use
•
When operating your machine for the first
time check inside the drum for any foreign
objects.
•
Partly load the drum with wet pieces
of clothes and let the machine run for
approximately 15 minutes. This operation
will clean the drum before loading
garments.
•
You may smell an unpleasant odor and
excessive fiber/lint may accumulate
during the first drying cycle.
Garments suitable for drying in
the machine
Always follow the advice on garment labels.
Dry only laundry having a label stating that
they are suitable for tumble-drying.
Garments unsuitable for drying
in the machine
•
Items with metal attachments like, belt
buckles and metal buttons can damage
your dryer.
13 - EN
The following weights are given as examples.
Correct load capacity
Approximate
Home articles
weights (gr)
Cotton quit covers (double)
Cotton quit covers (single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
1500
1000
500
350
700
250
100
700
350
Bath towels
Hand towels
Approximate
weights (gr)
Garments
C Please consult the information in the
“Program Selection” section. Always
start the program in accordance with the
maximum load capacity.
A Adding laundry to the dryer over the level
shown in the figure is not recommended.
Drying performance will be reduced when
the machine is overloaded. Doing so may
damage your machine and your clothes.
Blouses
Cotton shirts
Shirt
Cotton dresses
Dresses
Jeans
150
300
200
500
350
700
100
125
Handkerchiefs
T-Shirts
C Place garments into the drum loosely so
C tLhaerygewiotenm’tsg(eet.gta.nbgeledds.heets, quilt
covers, large tablecloths) may bunch-up.
Stop the machine 1 or2 times during
drying process to separate any bunched-
up laundry.
14 - EN
Control panel
9
8
6
5
10
Permanent Press
Regular
Dry
Cottons/Regular
Damp
Dry
Extra
Dry
Regular
Dry
Mixed Fabric
Timed Programs
Damp
Dry
Child Lock
15 min
Clean Filter
Drying
On / Off
Damp Dry
30 min
75 min
Delicates
Regular Dry
Refresh
Signal
Cancel
Start
End / Anticrease
Pause
Cancel 3 sec.
7
5. On/Off button
9. Program follow-up indicator
10. Filter cleaning warning LED
6. Program selector knob
7. Start/Pause/Cancel button
8. Cancel Audio Warning
15 - EN
C Always select the highest allowed
Loading door
temperature for drying. High temperature
•
•
•
Open loading door.
C Fwoilrl efunrsthuerer penroegrgraymanddettaimilse, ssaeveinthges.
Program Selection Table.
Place laundry items loosely into the dryer.
Push the loading door to close. Make
sure that no items are caught in the door.
Main programs
Permanent Press
Regular
Damp Dry
Dry
Cottons/Regular
Extra
Dry
Timed Program
Mixed Fabric
Depending on the type of textile, the following
main programs are available:
Regular
Dry
15 min
30 min
Damp
Dry
Clean Filter
Drying
C
h
i
l
d
L
o
c
k
On / Off
Damp Dry
Delicates
Regular Dry
Signal
Cancel
Start
60 min
Refresh
End / Anticrease
Pause
sec.
Cancel
3
•Cottons / Regular (max. 6 kg)
Durable clothing can be dried with this
program at a higher temperature. It is
recommended for cotton items (e.g. bed
sheets, quilt cover, underwear).
Permanent Press
Regular
Damp Dry
Dry
Cottons/Regula
Extra
Dry
Mixed Fabric
Regular
Dry
Timed Programs
15 min
Damp
Dry
30 min
75 min
Turning on the dryer
Prepare dryer for program selection by
pressing the On/Off button.
Delicates
Refresh
C Pressing the On/Off button does not
mean the program has started. Press the
"Start/Pause/Cancel" button of the dryer
to start the program.
•Permanent Press / Synthetics
(max. 3 kg)
Less durable clothing can be dried with
this program at a at a lower temperature
compared to the cottons program. It is
recommended for synthetic clothing (e.g.
shirts, blouses, synthetic/cotton blended
garments).
Program selection
For optimum drying results the dryer offers
different program groups and additional
options. There are automatic sensor programs
for different types of textiles and timer
programs.
Choose the appropriate program according
the type of textile from the table below it
also includes the level of dryness. Select the
desired program with the program selector
knob.
Permanent Press
Regular
Damp Dry
Dry
Cottons/Regular
Extra
Dry
Regular
Dry
Mixed Fabric
Timed Programs
15 min
Damp
Dry
Drying at a high
temperature, only for
cotton laundry. Thick and
multi layered laundry (e.g.
towels, linens, jeans) are
dried in a way that they do
not require ironing before
being put away.
30 min
75 min
Delicates
Extra Dry
Refresh
Normal laundry (e.g.
C Do not dry curtains or lace in the dryer.
tablecloths, underwear) are
dried in a way that they do
not require ironing before
being put away.
Regular Dry /
Ready to Wear
C Anti-creasing
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if the
laundry is not taken out after the program
ended. This program rotates the laundry in 60-
second intervals to prevent wrinkling.
Normal laundry (e.g. shirts,
dresses) are dried in a way
that they are ready to be
ironed.
Damp Dry /
Ready to Iron
16 - EN
Special programs
•Refresh / Ventilation
For special cases, there are also extra
programs available:
Only cool air circulation is performed for 10
minutes without providing hot air.
Permanent Press
•Timed Programs
Regular
Damp Dry
Dry
Cottons/Regular
One of the 15 min., 30 min., 75 min. timer
programs can be selected to reach the
desired final drying level at low temperatures.
The program dries for the selected time
regardless of dryness.
Extra
Dry
Regular
Dry
Mixed Fabric
Timed Programs
15 min
Damp
Dry
30 min
75 min
Delicates
Permanent Press
Refresh
Regular
Damp Dry
Dry
Cottons/Regular
Extra
Dry
Regular
Dry
Mixed Fabric
Timed Programs
15 min
Damp
Dry
C Additional programs may differ according
to the model of your dryer.
30 min
75 min
Delicates
Refresh
•Automatic Dry / Mixed Fabric (max. 3 kg)
Mix program (Regular Dry) is for mixed loads
with different types of fabrics. Mixed laundry
can be dried at a lower temperature.
C It is recommended to use a cloth bag
to avoid certain delicate garments and
laundry from being wrinkled or damaged.
C Remove garments immediately from the
dryer and hang them after the program
ends in order to prevent wrinkling.
•Delicates (max. 1.5 kg)
Very delicate laundry (silk blouses, fine
underwear, etc.) can be dried at a lower
temperature that are suitable for drying or for
laundry that is advised to be hand-washed.
Permanent Press
Regular
Damp Dry
Dry
Cottons/Regular
Extra
Dry
Regular
Dry
Mixed Fabric
Timed Programs
15 min
Damp
Dry
30 min
75 min
Delicates
Refresh
17 - EN
A As the inside of the dryer will be
excessively hot when you cancel the
program when the dryer is running,
activate the ventilation program to cool it
down.
Starting the Program
1. Press the “Start/Pause/Cancel” button to
start the program.
2. The Start/Pause/Cancel button will light up
to indicate that the program has started.
A If the dryer is stopped during any drying
program, and if the position of the
program selector knob is changed, a tone
will be heard (if the Cancel Audio Warning
function is not selected). The dryer will
not start even if the Start/Pause/Cancel
button is pressed, unless the program
selector knob is returned to the initial
program. The paused program must be
cancelled in order to change the drying
program.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of each program step, the
related lamp will light up and the lamp of the
completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the dryness
reaches “Damp Dry / Ready to Iron”.
Adding/removing laundry in stand-by
mode
In order to add or take out laundry after the
start of the program;
“Damp Dry / Ready to Iron”:
- Lamp lights when the dryer reaches the
“Damp Dry / Ready to Iron” step and remains
lit until the next step.
1. Press the Start/Pause/Cancel button to
switch the dryer to Pause mode. the drying
process will stop.
2. Open the door at the Pause position and
close it again after adding or taking out
laundry.
“Regular Dry / Ready to Wear”:
- Lamp lights when the dryer reaches the
“Regular Dry / Ready to Wear” step and
remains lit until the next step.
3. Press the “Start/Pause/Cancel” button to
restart the program.
C Laundry may be added or taken
out during a drying process, but
“End / Anticrease”:
- The lamp lights when the program comes
to an end and the anti-creasing function is
activated.
interrupting drying continuously will
extend the program's time and increase
energy consumption. Therefore, it is
recommended to add all laundry before
the drying program is started.
C If more than one lamp lights or flashes
constantly, it means that there is a
malfunction or a failure (Please see
Troubleshooting).
Auxiliary functions
Cancel Audio Warning Signal
Changing the program after the
program has started
Your dryer will send out a tone when the
program comes to an end. If you do not want
to hear this, you need to press the Cancel
Signal button. The relevant lamp will light
when this button is pressed and the tone will
not activate when the program ends.
Press and hold the Start/Pause/Cancel button
for around 3 seconds to Cancel the program
currently running.
Select another program by rotating the
program knob.
C You can select this function either before
Press the “Start/Pause/Cancel” button again
to start the new program.
or after the program starts.
C The program which is selected first will go
on even if the program selector knob is
moved and another program is selected
while the dryer is operating. You must
cancel the current program to change the
drying program.
18 - EN
Child-proof lock
There is a childproof lock to prevent any
program interruption due to the pressing of
keys while a program is running. The loading
door and all buttons except the “On/Off” key
on the panel are deactivated when the child-
proof lock is active.
In order to activate the childproof lock, pres the
Start/Pause/Cancel and Cancel Audio Warning
buttons at the same time for 3 seconds.
To start a new program after the program
ends or to stop a program, the childproof
lock should be deactivated. To deactivate the
childproof lock, press the same two buttons
for 3 sec.
C 2 beeps when activating and 1 beep when
deactivating the child-proof lock will be
heard.
Warning indicators
Filter cleaning
A warning lamp will light up to remind filter
cleaning after a program finishes.
C If the filter cleaning warning lamp flashes,
please refer to Troubleshooting.
End of program
The End/Anticrease and Clean Filter warning
lamps on the program follow up indicator will
light up when the program ends. The door can
be opened and the dryer becomes ready for
another load.
Press the On/Off button to shut down the
dryer.
C A 2-hour anti creasing program to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
program has ended.
A Clean the filter after each load!
C At the end of the program, it is
recommended to press the On-Off button
Off before unloading the dryer.
19 - EN
Technical Specifications
Model
Vented Dryer with electronic Sensor control
Height (in)
33 1/2
23 1/2
Witdth (in)
Depth (in)
21 1/4
Height adjustment of feet (in)
Weight, unpacked (lbs)
Voltage / Frequency
Connected load
Fuse
1/5
70.5
208-240V ~ 60 Hz
2000-2400 W
15A
This appliance’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off at recycling locations provided for this purpose. Your
appliance also contains a large amount of recyclable material. It is marked with this
label to indicate that used appliances should not be mixed with other waste. This way,
the appliance recycling organised by your manufacturer will be done under the best
possible conditions, in compliance with European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment. Contact your local government or your retailer for
used appliance collection points closest to your home. We thank you for doing your
part to protect the environment.
20 - EN
5 Quick Start-up Instructions
1. Open loading door.
5. Push the ON / OFF button to ON.
Cottons/Regular
Extra
Dry
Regular
Dry
Damp
Dry
Off
Delicat
R
6. Select the appropriate Program.
Permanent Press
Regular
Damp Dry
Dry
2. Check filter.
Cottons/Regu
Extra
Dry
Mixed Fabric
Regular
Dry
ed Programs
15 min
Damp
Dry
30 min
75 min
Delicates
Refresh
3. Load laundry loosely into the drum.
7. If necessary, select additional
functions.
Mixed Fabric
Timed Programs
15 min
Child Lock
30 min
75 min
al
cel
Start
Pause
Cancel 3 sec.
4. Push loading door closed. Ensure no
items are caught in the door.
8. Push the start button.
Mixed Fabric
Timed Programs
15 min
Child Lock
30 min
75 min
Signa
Can
art
ause
cel 3 sec.
21 - EN
6 Maintenance and cleaning
Lint filter
Sensor
Lint and fibers released from the laundry in to
the air during the drying cycle are collected in
the “Lint Filter”.
There are humidity sensors in your machine
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been
done recently.
C Fibres and lint are formed during wearing
A aAnlwdawysaschleinagn. the filter after each drying
3. Wipe the metal sensors with a soft cloth
dampened with vinegar and dry the sensors
afterwards.
cycle.
To clean the Filter;
1. Open loading door.
C Clean the metal sensors at regular
2. Remove the lint filter by pulling it up and
open the filter.
A iNnteevrevraluss(e4stiomlveesntas,yecalera).ning agents
or similar substances when cleaning
as these might cause fire and/or an
explosion!
3. Clean lint, fiber, and by hand or with a soft
piece of cloth.
4. Close the filter and put it back in place.
C You can clean the filter and filter area with
a vacuum cleaner.
C Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
22 - EN
7 Troubleshooting
Problem
Cause
Explanation / Solution
* Clean the lint filter.
* Meshes of the filter may be clogged.
Wash with water.
Drying process
takes too long.
Lint filter may not have been
cleaned.
* It may not plugged in.
* Make sure that the dryer is plugged
in.
* The loading door may be ajar.
* Program may not be set or the
Dryer does not
* Make sure the loading door is
properly closed.
switch on or the “Start/Pause/Cancel” button may
program does
not start. Dryer
does not start
when set.
not have been pressed.
* “Childproof lock” may be
activated.
* Make sure the program has been set
and it is not in “Pause” mode.
* Deactivate the childproof lock.
* Make sure the condenser cover and
the red lock is closed securely.
* The condenser cover on models
with a condenser may not be
closed securely.
* Make sure the loading door is
properly closed.
* Press the “Start/Pause/Cancel”
button to start the program.
Program is
interrupted for
no reason.
* The loading door may be ajar.
* Electricity may be cut off.
* Dry only the laundry which is suitable
for drying in the dryer. First check the
labels on the clothes.
* Select a program a suitable low
temperature setting for the laundry
type to dry the clothes.
Laundry has
shrunk, become
felted or has
deteriorated.
* A program not suitable for the
laundry type might have been
used.
Drum light does
not come on.
(for models
* The dryer may not have been
started using the On/Off button.
* Make sure the dryer is On.
* Call the authorized service to replace
the bulb.
equipped with a * Bulb may have burned out.
lamp)
* The 2-hour anti creasing
“End /
program to prevent laundry
Anticrease” LED
from wrinkling may have been
flashes.
* Turn off the dryer and take the
laundry out of the dryer.
activated.
“End /
* Turn off the dryerand take the laundry
out of the dryer.
Anticrease” LED * Program has come to an end.
is on.
“Filter cleaning” * Lint filter may not have been
* Clean the lint filter.
LED flashes.
cleaned.
* A heat sensor failure has
occurred. dryer ends the program
without heating.
The “Drying”
LED flashes.
* Turn off the dryer and remove the
laundry. Call the authorized service.
For products equipped with a condenser
* Water tank may be full.
“Water tank”
* Anti-creasing program might be * Drain the water from the water tank.
running.
warning LED on.
“Condenser
cleaning” LED
on.
* Condenser may not have been
* Clean the condenser.
cleaned.
ACall an authorized service if the problem persists.
23 - EN
|