P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 1
En
Fr
Hi-Speed USB 2.0
De
Nl
Es
It
4-Port Hub
Connect up to 4 Hi-Speed USB 2.0 or 1.1 devices
User Manual
F5U234ea
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 3
TABLE OF CONTENTS
En
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 4
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 1
INTRODUCTION
En
Congratulations and thank you for purchasing the Belkin Hi-Speed USB
2.0 4-Port Hub (the Hub). The Hub provides four downstream USB ports
that offer backward-compatible, Plug-and-Play connectivity with all USB
devices, including USB 1.1 (or low- and full-speed) devices, as well as
with USB 2.0 (or high-speed) devices. This includes such peripherals as
scanners, printers, mass-storage devices, and high-resolution cameras.
The Hub is self-powered, which allows the cascading of devices with
additional hubs, so that up to 127 USB devices may be connected to a
single port.
The Hub is uniquely designed to allow the user to position the four
downstream ports toward the back of the desktop for efficient cable
management, or to the front of the desktop for easier port access. The
Hub also provides a status LED for each individual port and a master
power LED.
1
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 2
OVERVIEW
Features
• Compliant with Universal Serial Bus specification 2.0
(data rate 1.5/12/480Mbps)
• Backward-compatible with Universal Serial Bus specification 1.1
(data rate 1.5/12Mbps)
• Compatible with Windows® 98 SE, Me, 2000, and XP
• Approved by USB Implementers Forum (USB-IF)
• Supports Plug-and-Play specifications
• Supports “hot swapping” of USB devices
• Over-current detection and protection
• Individual port-status indicator LEDs
• Four 480Mbps downstream ports
• Fully compatible with USB 1.1 and USB 2.0 devices
• Compact, slim-line design
• Multiple hubs may be stacked on top of one another
Package Contents
• Hi-Speed USB 2.0 4-Port Hub
• AC Power Adapter
• User Manual
• USB device cable
2
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 3
OVERVIEW
En
Technical Specifications
Upstream Ports
Downstream Ports
Power Mode
Per-Port Voltage
Per Port Current
(1)
(4)
Self-powered/bus-powered
DC +5V
Self-Powered Mode: 500mA (max)
Bus-Powered Mode: 100mA (max)
(Ports one and two only)
Operating Temperature
Storage Temperature
Enclosure
5º C ~ 40º C
-20º C ~ 60º C
ABS
Power Supply
Output:
DC 5V, 2.1A
Plug Size:
3.5mm (outer)
1.0mm (center)
Plug Polarity:
Center Positive
Main Power LED Color Definitions:
Off
Red
Not operational
Operational
Port Status LED Color Definitions:
Off
Not operational, or no device
connected
Green
Fully operational
Amber
Over-current condition
3
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 4
INSTALLATION
Important Note: Please do not connect any USB devices to the Hub until
instructed to do so in step 4 of this installation
procedure.
1. Plug the AC adapter into a wall outlet, or surge suppressor. Plug the
DC connector into the DC Power Jack found on the side of the Hub.
Important Note: The Hub may be used without the power supply when
connecting devices that draw 100mA of current or less,
however, only port 1 and port 2 will be functional.
2. Plug the flat end of the provided USB device cable into the
downstream port of your computer or downstream port of another
hub, then plug the mini 6-pin connector of the device cable into the
upstream port on the rear of the Hub.
Important Note: The Hub must be connected to a USB 2.0-compliant host
in order to function in high-speed mode (480Mbps data
rate). If the Hub is connected to a USB 1.1-compliant
host, it will operate only in low-speed or full-speed mode
(1.5Mbps/12Mbps).
3. Windows will now detect your Hub and install the required driver
support. (The Windows “Install New Hardware Wizard” may prompt
you to provide your Windows Installation CD to complete the driver
installation process).
4
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 5
INSTALLATION
En
Important Note: High-speed hub drivers are included with most USB 2.0
PCI upgrade cards, and are pre-installed along with the
PCI card drivers. If you purchased an upgrade card prior
to the release of high-speed hub support, please check
with your PCI card vendor for an updated USB 2.0 driver.
The Belkin USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
4. Plug the USB-A connector of the USB device, or an additional hub,
into any of the downstream ports of the Hub.
Important Note: When moving a device from one port on the Hub to
another, it may be necessary to reinstall the USB drivers
for that device.
5
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 6
INFORMATION
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole
responsibility that the product:
F5U234
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U234, to which this
declaration relates, is in conformity with Generic Emissions Standard EN 55022:1998 Class B,
EN50081-1 and with Generic Immunity Standard EN50082-1
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no
charge provided it is returned during the warranty period, with transportation charges prepaid,
to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may
be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Belkin; or
if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING
BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING
OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
6
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 7
En
Fr
De
Nl
Es
It
Pt
7
P74386ea_F5U234ea_uk 08-09-2003 11:13 Page 8
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin GmbH
Hanebergstrasse 2
80637 München • Germany
Tel: +49 (0) 89 1434 05-0
Fax: +49 (0) 89 / 143405-100
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
© 2003 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
P74386ea
|