Belkin Switch F1DF102P User Manual

2. Connect the cables to the monitor, keyboard, and mouse ports on  
Package Contents  
• Remote  
• Base with Cables  
System Requirements  
Installing your Flip  
Before you begin, make sure that both computers are powered off.  
Using your Flip  
When you power on your computers, your first computer’s desktop will  
appear on your monitor. You are now ready to use that computer as if  
it were directly connected to your monitor, keyboard, and mouse.  
your two computers.  
Monitor  
Flip supports any LCD or CRT monitor with a VGA connection.  
You can also use your DVI monitor with Flip by connecting a VGA  
adapter to the DVI cable. Flip does not support direct DVI connections  
from monitors.  
1. Connect your monitor, keyboard, and mouse to the base. Now,  
connect the remote to the base. Place the remote anywhere on  
your desk.  
To switch access to your other computer, simply press the remote.  
Your other computer’s desktop will appear on your monitor. You are  
now ready to use your other computer as if it were directly connected  
to your monitor, keyboard, and mouse. Press the remote each time  
you want to switch access from one computer to the other.  
Introduction  
Congratulations and thank you for purchasing the Flip PS/2 KVM  
Switch. Flip is easy to set up and use, and comes with everything  
you need to share one monitor, keyboard, and mouse between  
your two computers. No additional cables or software are required.  
VGA connection  
Note: For a list of frequently asked questions and troubleshooting tips,  
The diagram below shows a typical Flip setup. The remote sits  
on your desk and connects—along with your monitor, keyboard,  
and mouse—to the cable base. The base is connected to your  
two computers.  
Keyboard/Mouse  
Flip supports any keyboard and mouse with a PS/2 connection.  
PS/2 connection  
Computers  
base with cables  
Flip can be used with any PC desktop or notebook computer that  
supports PS/2 keyboard and mouse connections, and that runs on  
one of these operating systems:  
3. Power on your computers.  
®
• Windows 98 SE, 2000, XP, 2003  
You are now ready to use your Flip.  
®
• Linux  
remote  
Flip Tip:  
Flip Tip:  
You can use the included fastener strip  
to attach the remote to your monitor,  
Keep the base behind your computers to  
keep your desk free of cable clutter.  
Package Contents/Introduction  
1
System Requirements  
2
Installing your Flip  
3
Installing your Flip  
4
Using your Flip  
5
keyboard, or other desk item.  
 

Black Box Switch ACU5010A User Manual
Black Decker Blender BX700G User Manual
Blue Rhino Gas Grill NSG3902B User Manual
Braun Electric Shaver Series 7 790cc 4 User Manual
Bush Hog Lawn Mower EFM 480 600 User Manual
Capcom Video Game Controller SF4 User Manual
Casablanca Fan Company Fan 59057 User Manual
Casio Electronic Keyboard WK220 User Manual
Cateye Bicycle Accessories CC AT200W User Manual
Chrysler Automobile 2004 Town and Country User Manual