Wireless Cable/DSL
Gateway Router
Share your broadband Internet connection
without cables
Quick Installation Guide
F5D7230-4
Follow the Easy Install Wizard to
Complete the Installation
Connect the Router to your
Modem and Computer
Connecting and Configuring your Wireless Router
Run the Easy Install Wizard Software
1
2
3
Verify the contents of your box. You should have the following:
•
•
•
•
•
•
•
54g Wireless Cable/DSL Gateway Router
Vertical Mounting Base (optional use)
Category 5 Networking Cable (for connection of the Router to the computer)
Power Supply
Belkin Easy Install Wizard Software CD
User Manual
Click on “Set Up the Router” to begin.
The Wizard will ask you to connect your Router. Follow the steps on the
screen, or do the following:
IMPORTANT: Run the Easy Install Wizard from the computer that is
directly connected to the cable or DSL modem. DO NOT CONNECT THE
ROUTER AT THIS TIME.
1. Turn off the power to your modem by unplugging the power supply
from the modem.
2. Locate the network cable that is connected between your modem and
your computer and unplug it from your computer, leaving the other
end connected to your modem.
1. Shut down any programs that are running on your computer at
This Quick Installation Guide
this time.
2. Make sure you have the following items at the computer that is now
directly connected to the cable or DSL modem. DO NOT CONNECT THE
ROUTER AT THIS TIME.
Modem Requirements
3. Plug the loose end of the cable you just unplugged into the port on
Your cable or DSL modem must be equipped with an RJ45 Ethernet port.
Many modems have both an RJ45 Ethernet port and a USB connection. If
you have a modem with both Ethernet and USB, and are using the USB
connection at this time, you will be instructed
to use the RJ45 Ethernet port during the
installation procedure. If your modem has
the back of the Router labeled “Internet/ WAN”.
4. Connect the new network cable from the back of the computer to one
of the ports labeled “1–4”. Note: It does not matter which numbered
port you choose.
•
•
•
•
•
The Easy Install Wizard CD-ROM
The Router
The Router power supply
Category 5 networking cable
This Quick Installation Guide
Computer that was originally connected to
the cable or DSL modem
only a USB port, you can request a different
Ethernet
USB
type of modem from your ISP, or you can, in
some cases, purchase a modem that has an
RJ45 Ethernet port on it.
3. Turn off any firewall or Internet connection sharing software on
New network cable
(to computer)
your computer.
Easy Install Wizard
Belkin has provided our Easy Install Wizard software to make installing
your Router a simple and easy task. You can use it to get your Router up
and running in minutes. The Easy Install Wizard requires that your
Windows® 98, Me, 2000, or XP computer be connected directly to your
cable or DSL modem and that the Internet connection is active and
working at the time of installation. If it is not, you must use the
“Alternative Setup Method” section of the User Manual to configure your
Router. Additionally, if you are using an operating system other than
Windows 98, Me, 2000, or XP, you must set up the Router using the
“Alternative Setup Method”.
4. Insert the Easy Install Wizard software CD into your CD–ROM drive.
The Easy Install Wizard screen will automatically appear on your
screen within 15 seconds. If it does not, select your CD-ROM drive
from “My Computer” and double-click on the file named “Setup” on
the CD-ROM.
To power
adapter
Cable or
DSL modem
Existing network cable
(that came with modem)
Connect the Router to your
Modem and Computer contd.
Continue Following the Wizard’s Instructions
4
3
5. Turn on your cable or DSL modem by reconnecting the power supply to
The Wizard will take you through the completion of the process.
the modem.
6. Before plugging the power cord into the Router, plug the cord into the
wall, then plug the cord into the Router’s power jack.
belkin.com
7. Verify that your modem is connected to the Router by checking the
lights on the front of the Router. The green light labeled “WAN” should
be ON if your modem is connected correctly to the Router. If it is not,
recheck your connections.
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
8. Verify that your computer is connected properly to the Router by
checking the lights labeled “LAN 1,2,3,4”. The light which corresponds
to the numbered port that you connected your computer to should be
ON if your computer is connected properly.
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Begin Surfing!
5
Fax: +31 (0) 20 654 7349
Congratulations! You have finished installing your new Belkin Router.
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
P74223
© 2003 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.
|