Package Contents
VGA, PS/2 Cable Kit
17" Dual-Rail LCD
Rack Console
Side-Rail Kit
Keys
IEC Power Cable
Quick Installation
Guide
Introduction
This booklet will guide you through the basic steps needed to install the
17” LCD Rack Console with Dual-Rail Technology.
Introduction
1
Panel Color
16.7 million display colors
Rising 2ms, Decay 14ms
Laptop style
Response Time
Keyboard Type
Keyboard Connection
Mouse Type
PS/2
Touchpad style
PS/2
Mouse Connection
Operating Life of Individual Keys 8 million cycles
Warranty 2 years
Key-Locking
Mechanism
LCD
Front-Panel Controls
105-Key
Keyboard
TFT/LCD
Active-Matrix
Color Panel
Touch Pad
On/Off
Auto
Auto
Up
Down
Menu
Menu
Specifications
3
Installation
Step 1 Place the console inside the rack.
Step 2 Mount the front brackets to the rack.
Step 3 Slide the side rails onto the mounting studs.
Installation
4
Step 4 Mount the side rails to the rear of the rack.
Step 5 Connect the IEC power cable to an active power
outlet and power up the Console.
Installation
5
Connecting the KVM
Switch or Server
Step 1 Make sure your KVM switch or server is powered OFF.
Step 2 Using the included PS/2 KVM Cable Kit, connect one set of VGA and PS/2
connectors to the back of the Console. (Refer to diagrams below.)
Step 3 Connect the other end of the Cable Kit to the console monitor, keyboard, and
mouse ports on your KVM switch or server. (Refer to diagrams below.)
Step 4 Power ON the Console.
Step 5 Power ON the KVM switch or server connected to the Console.
Connecting the KVM Switch or Server
6
You are now ready to use your LCD Rack Console.
Console
Console
Server
KVM Switch
The Console offers two power on/off methods:
• a power button on the LCD front-panel console, and
• an LCD power-save (with drawer closure).
Connecting the KVM Switch or Server
7
Troubleshooting
My Console doesn’t appear to be on.
Make sure that the power switch located at the front of the keyboard drawer is “on” and
that the power cable is connected properly.
What is the maximum video resolution that the LCD
panel supports?
The LCD panel supports a resolution of up to 1280x1024.
Do I have to install any software to use the Console?
No, the Console does not require any drivers or software to be installed in your
computers. Simply connect the Console directly to a computer or to a KVM switch, and it
is ready for use.
Troubleshooting
8
Titan 17” Dual-Rail
LCD Rack Console
Start Here
F1DC101C-US
Quick Installation Guide
Titan 17” Dual-Rail
LCD Rack Console
Belkin Tech Support
Belkin Ltd.
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Belkin B.V.
Boeing Avenue 333
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
PM01576
|