Specifications
Horizontal Coverage
Active Radiating Factor
Recommended Crossover (1)
Waveguide Material
Nominal Impedance
Minimum Impedance
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range (5)
Voice Coil Diameter
Winding Material
140° max
92.5 %
1.5 kHz
Cast Aluminium
8 ohm
7.7 ohm
50 W
100 W
108.5 dB
1.2 -18 kHz
44 mm (1.7 in)
Aluminium
Polyimide
1.8 T
Diaphragm Material
Flux Density
Mounting and Shipping Info
Waveguide Baffle Cutout
Driver diameter
Dimensions
102x25 mm (4x1 in)
86 mm (3.3 in)
111x87x155 mm
(4.4x3.5x6.1 in)
1.3 kg (2.9 lb)
Net Weight
Shipping Weight
Shipping Box
1.35 kg (3.0 lb)
120x95x180 mm
(4.7x3.7x7.1 in)
1
12 dB/oct. or higher slope high-pass filter.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
3
Line Array Source
Line Array optimized Waveguide
Max. horizontal coverage 140°
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coil
Polyimide diaphragm
WG400
4
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
Waveguide mounted on 90°x10° bell horn
1200 – 18000 Hz response
108.5 dB sensitivity
|