CE SERIES, DP-1A
OPTIONS -DT, DY, LT600-VC
TPS24-05, TS302A
TELEPHONE INTERCOM
ACCESSORIES
WALL MOUNT HANDSET/HOOKSWITCH ASSEMBLIES
• Units are Designed for Use with Telephone Intercoms or Paging Systems
• Circuitry Provides Precise Speech Reproduction.
• Shipped Assembled and Wired to a Barrier Strip Terminal Block on the
Mounting Plate with Color Coded Leads and Spade Plugs.
• Brushed Steel Wall Plates Fit Standard Electrical Boxes (Hardware Included)
• DPDT Style Hookswitch can be Wired as Form A, B, or C to Meet Your System Needs.
CE-2A-AC. Series features a standard “500” style neutral color handset with a chrome hook-
switch, and brushed stainless steel plate. The hookswitch is a leaf type with cross bar palladium
contacts for long-life and trouble-free operation. Model CE-2A has a flexible coil cord. Model
CE-2A-AC includes a 25" (635mm) stainless steel armored cable, securely fastened to mount-
ing plate and handset for installations that require vandal protection. (Option requires
31⁄4"(83mm) in front of plate,11⁄2" (38mm) behind plate).
CE-2A-AC
DP-1A DESK INTERCOM STATION ASSEMBLY MODEL. The DP-1A Is a “2500” style desk-
top telephone which has the same quality features as the CE Series. Assembly includes hand-
set, two form “C” (DPDT) hookswitches, transmitter, receiver, housing with blank front panel,
and coiled cord. Unit is wired to an interior mounted terminal block and supplied with spade
lugs for quick modification. Unit does not include ringer, induction coil. Made of neutral color
high-impact thermoplastic.
DP-1A
CE Series AND Model dp-1a Specifications
Switch
2 form “C”, DPDT
Contact rating
Transmitter
Receiver
Handset
HANGER
1 amp @ 24VDC
High quality carbon (25-50 ohms impedance)
Magnetic, ring armature diaphragm (150 ohms impedance)
Neutral color high impact thermoplastic
Chrome plated steel (CE Series)
Mounting Plate
Type 304 brushed stainless steel CE Series
Standard
Wiring
Diagram
(see back for
push-to-talk
option)
MOUNTING PUSH-TO-TALK SWITCH
DImensions
WEIGHT
MODEL
CE-2A
CE-2A-AC
DP-1A
PLATE
OPTION* (see back side)
(W x H x D)
2 Gang
2 Gang
-PT
–
4-1/2" x 4-1/2" x 2-1/4" 1.2 Lbs. (.55 kg.)
4-1/2" x 4-1/2" x 2-1/4" 1.2 Lbs. (.55 kg.)
4-3/4" x 4-3/4" x 8-1/2" 2.7 Lbs. (1.2 kg.)
Desk Model
-PT
*
Suffix Model with (-PT) Example: Model DP-1A would become Model DP-1A-PT.
SURFACE MOUNTING TELEPHONE INTERCOM ENCLOSURE
Sturdy CRS box is designed for surface mounting Atlas Sound intercom station Series CE.
Knock-outs are provided on the bottom and back. Two mounting holes are conveniently locat-
ed for mounting to an outlet box if required. Finish is neutral gray epoxy.
TS302A
MODEL
TS302A
MOUNTS
CE-2A(-AC)
DIMENSIONS (W x H x D)
4-11/16” x 4-5/8” x 2-15/32”
WEIGHT
1 Lb. (.45 kg.)
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
359
© 2001 Atlas Sound LP
Printed in U.S.A.
000501
SL8-1434
|