E1752
®
PEB-G21
PCI Express x1
Network Interface Card
User Guide
First Edition
October 2004
Contents
Introduction ........................................................................................ 5
Package contents ............................................................................... 5
Features .............................................................................................. 8
LED descriptions ................................................................................. 9
System requirements........................................................................ 10
Installing the network card ............................................................... 11
Connecting the network cable .......................................................... 12
Running the installation program ...................................................... 13
Windows® Server 2003 Advanced Server Driver Software .. 13
Windows® 2000 Driver Software ......................................... 17
Windows NT® Driver Software............................................. 20
Installing Linux Driver Software ............................................. 23
Novell NetWare Server 4.2/5.x/6.0 Driver Software ............ 26
Novell NetWare Server 6.5 Driver Software .......................... 30
ASUS PEB-G21 User Guide
3
Installing Solaris Driver Software ........................................... 32
SCO OpenServer 5.0.7 .......................................................... 35
UnixWare/OpenUnix 8 ........................................................... 38
ASUS Contact Information ................................................................ 42
ASUS PEB-G21 User Guide
4
Introduction
Thank you for buying the ASUS PEB-G21 PCI Express x1 Network Interface Card!
This user guide tells you how to install and configure the card. It is assumed that you
have adequate knowledge on PCs and some familiarity with Ethernet networks.
Package contents
Check the following items if present in your package. If you discover damaged or
missing items, contact your retailer.
1 x ASUS PEB-G21 PCI Express x1 Network Interface Card
1 x Support CD
1 x User Guide
ASUS PEB-G21 User Guide
5
Models
The ASUS PEB-G21 network interface card comes with a standard bracket for regular
PCs.
ASUS PEB-G21 User Guide
6
Layout
LAN controller
R
PEB-G21
ACT/LNK
BROADCOM
BCM5721
10=OFF
100=ORG
1000=GRN
PCI-Express interface
ASUS PEB-G21 User Guide
7
Features
PCI-Express x1 Interface
• PCI Express 1.0a host interface compliant
• x1 PCI Express lane
• Supports PXE, RPL, ASF 2.0
• ACPI and Wake-on-LAN support
Network Interface
• Broadcom® BCM5721 PCI Express Gigabit Ethernet controller
• 10/100/1000 BASE-T controller with integrated transceiver
• RJ-45 LAN port
ASUS PEB-G21 User Guide
8
LED descriptions
The RJ-45 LAN port allows Gigabit connection to a Local Area Network (LAN). Refer
to the table below for the LAN port LED indications.
LAN port LED indications
ACT/LINK LED
Status Description
SPEED LED
Status
OFF
Description
OFF
No link
10 Mbps connection
100 Mbps connection
1 Gbps connection
GREEN
BLINKING
Linked
ORANGE
GREEN
Data activity
ACT/LINK
LED
SPEED
LED
RJ-45 port
ASUS PEB-G21 User Guide
9
System requirements
Your PC or server should meet the following system requirements before installing
the ASUS PEB-G21 network interface card:
• PCI Express x1, x4, x8 or x16 slot (PCI Express 1.0a host interface)
• optical drive
• at least 10 MB free hard disk space
• supported operating system (any of the following)
- Windows Server 2000/2003, Windows 2003 64-bit
- Red Hat Enterprise Linux ES 3.0 64-bit, Red Hat Enterprise Linux AS 3.0,
Red Hat 9.0
- SuSE Linux 9.1, SuSE Linux Enterprise 8.0
- NetWare 6.5
- Solaris 9.0
- UnixWare 7.1.3
- Open Server 5.0.7
ASUS PEB-G21 User Guide
10
Installing the network card
Follow these steps to install the card into your PC.
CAUTION! Before handling the network card, touch a bare metal portion of your
PC to discharge the static electricity from your body. Wear a wrist strap grounded
to the PC chassis when handling the card.
1.
2.
3.
Unplug the power cord from the electrical socket.
Remove the PC cover.
Locate an empty, PCI Express x1 slot and remove its slot cover. Save the
screw for later use.
IMPORTANT! Do not install the network card in a shared PCI Express x1 slot.
Check your PC documentation to ensure that you install the card into the correct
slot.
4.
5.
6.
Carefully insert the card into the PCI Express x1 slot.
Secure the card with the screw that you removed earlier.
Replace the PC cover and plug in the power cord.
ASUS PEB-G21 User Guide
11
Connecting the network cable
Follow these steps to connect the card to the network.
The RJ-45 port on the network card provides a 10, 100, or 1000 Mbps connection,
depending on the speed of the connected hub or switch.
1.
Plug the RJ-45 connector of the twisted-pair network cable into the RJ-45 port
on the card backplate.
2.
3.
Connect the other end of the network cable to an active network port.
Turn on the PC.
ASUS PEB-G21 User Guide
12
Running the installation program
The support CD that came with the PCI Express card package contains the drivers
that you have to install to avail all the features of this card.
Windows® Server 2003 Advanced Server Driver Software
Installing the Driver Software
When the Windows Server 2003 system first boots up after installing a new
hardware device, such as a ASUS PEB-G21 PCI Express x1 Network Interface Card,
the system automatically detects the new hardware and prompts you to install the
driver software for that device.
A network device driver must be installed before the ASUS PEB-G21 PCI Express x1
Network Interface Card can be used with your Windows Server 2003 system.
ASUS PEB-G21 User Guide
13
Using the Driver Installer
To install the adapter software for Windows Server 2003, do the following
Before beginning this procedure, verify that the Windows Server 2003 system has
been upgraded to the latest version with the latest service pack applied. The
following instructions are based on the latest beta versions of Server 2003.
1.
Start Windows Server 2003 and log in. Note that you must have Administrator
privileges to install the driver software.
When you boot up the Windows Server 2003 system after installing the adapter
card, a series of Found New Hardware windows are displayed.
2.
Place the Support CD into the optical drive. The CD automatically displays the
Drivers menu if Autorun is enabled in your computer.
If Autorun is not enabled in your computer, browse the contents of the
Support CD to locate the file ASSETUP.EXE in the BIN folder. Double-click the
ASSETUP.EXE file to run the installation program.
OR
ASUS PEB-G21 User Guide
14
From the Windows Start menu, click Run and type the following on the
command line, d:\BIN\ASSETUP.EXE then press the Enter key.
(Assuming that d:\ is your optical drive)
The following screen appears.
3.
From the Drivers tab, click the PEB-G21 LAN card item.
ASUS PEB-G21 User Guide
15
The following describes the items on the menu:
PEB-G21 LAN Card
Installs the PEB-G21LAN card driver.
PEB-G21 LAN Card Driver Disk Image
Allows you to create a driver disk for the PEB-G21 LAN card.
Broadcom Software Utility
Installs the Broadcom® software utility.
4.
Follow the succeeding screen instructions.
ASUS PEB-G21 User Guide
16
Windows® 2000 Driver Software
Installing the Driver Software
The ASUS PEB-G21 PCI Express x1 Network Interface Card must be physically
installed in your system prior to installing the driver software. See Installing the
Hardware for details.
When the Windows 2000 system first boots up after installing a new hardware
device, such as a Gigabit Ethernet Adapter, the system automatically detects the
new hardware and prompts you to install the driver software for that device.
A network device driver must be installed before the Gigabit Ethernet Adapter can
be used with your Windows 2000 system.
Installing the Adapter Software
To install the adapter software for Windows 2000:
Before beginning this procedure, verify that the Windows 2000 system has been
upgraded to the latest version with the latest service pack applied.
ASUS PEB-G21 User Guide
17
When updating the adapter software on existing ASUS devices, the Advanced
Property settings may not be updated unless the existing ASUS device is removed
by following the instructions in the Removing the Driver Software section. You must
then perform a scan for hardware changes in the device manager, followed by
reinstalling the ASUS device with the current adapter software as described in the
Installing the Driver Software section. Prior to uninstalling the Broadcom device,
ensure to capture all Advanced Property settings because the properties will be lost.
1.
Start your Windows 2000 system and log in. You must have Administrator
privileges to install the driver software.
When you boot up the Windows 2000 system after installing the adapter card,
a series of Found New Hardware Wizard windows are displayed.
2.
3.
4.
In the Install Hardware Device Drivers window, click Search for a suitable driver
for my device (recommended), then click Next.
In the Locate Driver Files window, select the applicable search location check
boxes, then click Next.
When prompted, insert the media to be searched into your CD-ROM drive, type
the path to the driver, and select OK.
ASUS PEB-G21 User Guide
18
Example: e:\
Where "e" is the designation of the CD-ROM drive on your system.
5.
In the Driver Files Search Results window, verify that the correct path to the
driver software is shown, then click Next.
If the Insert Disk screen appears, do not insert the Windows 2000 disk. Some early
versions of Windows 2000 may display a spurious message prompting you to
insert the Windows 2000 disk. If this occurs, leave the software and drivers
CD-ROM in the drive and click OK. If asked to specify the location of the
Windows 2000 CD-ROM instead, click Browse (do not use the text field) and
locate the path to the ASUS PEB-G21 PCI Express x1 Network Interface Card
drivers.
ASUS PEB-G21 User Guide
19
Windows NT® Driver Software
Installing the Driver Software
•
The ASUS PEB-G21 PCI Express x1 Network Interface Card must be physically
installed in your system prior to installing the driver software. See "Installing
the Hardware" for details.
•
A network device driver must be installed before the Gigabit Ethernet Adapter
can be used with your Windows NT system. BACS2 Help files require Internet
Explorer 4.0 or later to work properly.
•
•
•
We recommend using Internet Explorer 5.0 to view help files.
Hot Plug installation is not supported on dual port devices with Windows NT4.
We recommend using Internet Explorer 5.0 to view help files.
To install the adapter software for Windows NT:
1.
2.
Verify that the Windows NT system is upgraded with Service Pack 4 or later.
Start your Windows NT system and log in. You must have System
Administrator privileges to install the driver software.
ASUS PEB-G21 User Guide
20
3.
4.
5.
6.
Open the Control Panel.
In the Control Panel, double-click the Network icon.
When the Network window opens, select the Adapters tab.
To install a new adapter, select the adapter and click Add .
All previously installed drivers are listed under Network Adapters.
7.
When the Select Network Adapter window opens, click Have Disk....
ASUS PEB-G21 User Guide
21
8.
When prompted, insert the driver installation media, or choose a location to
install the driver from. Type the path to the driver, and click OK.
For example, to install the adapter driver software for Windows NT, type e:\ in the
Insert Disk location box (where "e:" is the designation of the CD-ROM drive on your
system).
If you acquired the adapter software on floppy disk or from the ASUS support
website, enter the path to where the adapter driver files reside on your system.
9.
With Gigabit Ethernet Controller highlighted in the Select OEM Option window,
click OK.
The adapter files are installed, then the Network window appears showing the newly
installed adapter.
10. Click Close, then the Microsoft TCP/IP Properties window appears.
11. Configure the TCP/IP protocol and click OK.
12. When prompted to restart your computer, click Yes.
ASUS PEB-G21 User Guide
22
Installing Linux Driver Software
Installing Source RPM Package
1.
Install the source RPM package:
rpm -ivh bcm5700-<version>.src.rpm
2.
Change the directory to the RPM path and build the binary driver for your
kernel:
cd /usr/src/{redhat,OpenLinux,turbo,packages,rpm ..}
rpm -bb SPECS/bcm5700.spec or rpmbuild -bb SPECS/
bcm5700.spec
Note that the RPM path is different for different Linux distributions.
3.
Install the newly built package (driver and man page):
rpm -ivh RPMS/i386/bcm5700-<version>.i386.rpm
Note that the force option is needed if installing on some distributions that may
already contain an older version of the driver.
ASUS PEB-G21 User Guide
23
The driver will be installed in one of the following paths:
•
•
•
2.2.x kernels:
/lib/modules/<kernel_version>/net/bcm5700.o
2.4.x kernels:
/lib/modules/<kernel_version>/kernel/drivers/net/bcm5700.o
2.4.x kernels with bcm5700 driver patched in:
/lib/modules/<kernel_version>/kernel/drivers/net/bcm/
bcm5700.o
or
/lib/modules/<kernel_version>/kernel/drivers/addon/
bcm5700/bcm5700.o
2.
3.
Load the driver:
insmod bcm5700
To configure the network protocol and address, refer to Linux-specific
documentation.
ASUS PEB-G21 User Guide
24
Building Driver From TAR File
1.
Create a directory and extract the TAR files:
tar xvzf bcm5700-<version>.tar.gz
Build the driver bcm5700.o as a loadable module for the running kernel:
cd bcm5700-<version>/src
make
2.
3.
4.
Test the driver by loading it:
insmod bcm5700.o
Install the driver and man page:
make install
See the RPM instructions above for the location of the installed driver.
5.
To configure network protocol and address, refer to the manuals supplied with
your operating system.
ASUS PEB-G21 User Guide
25
Installing Novell NetWare Server 4.2/5.x/6.0 Driver
Software
The following instructions outline the installation of Novell NetWare Server 4.2, 5.x,
or 6.0 driver software. If you need instruction on installing Novell NetWare Server
6.5 driver software, proceed to Installing Novell NetWare Server 6.5 Driver
Software.
Ensure that the server has the latest support pack available installed. The latest
want to create an archive disk by copying all the files from the
CDROM\NetWare\Driver directory onto a floppy disk. If you choose to use the
CDROM directly, ensure that the CDROM.NLM is loaded and that you are aware of the
NetWare Volume name for the CD ROM that you just installed.
1.
From the NetWare Server console, type LOAD NWCONFIG (or just NWCONFIG)
and press Enter.
2.
3.
From the Configuration Options screen, select Driver options and press Enter.
Select the Configure network drivers option and press Enter.
ASUS PEB-G21 User Guide
26
4.
5.
Choose the Load an additional driver option and press Enter.
Insert the CD or driver disk created using the Broadcom MakeDisk utility, and
select the Install an unlisted driver option, by pressing Insert.
6.
If you are using the archive disk that you created, insert the disk into drive A:
and press Enter. If you have the CD ROM mounted as a NetWare volume, press
F3 and enter <Volume Name>: NetWware\Driver as the source path. Where
<Volume Name> is the name of the NetWare Volume for the CD ROM and
NetWare\Driver is the directory of the specific files on the CD ROM needed for
this installation.
7.
8.
9.
The name of the driver displays.
Press Enter to select the highlighted driver.
A copy the driver prompt appears.
10. Select Yes and press Enter.
11. Select Yes and press Enter to copy the .LDI file. This is the installation script
for the driver.
12. Follow the instructions for the installation.
13. Select Save parameters and load driver to continue.
14. Choose Exit to return to the server console prompt.
ASUS PEB-G21 User Guide
27
If you are performing an initial installation of NetWare 4.2/5.x/6.0 and have more
than two adapters installed, the install program will allow you to allocate the actual
number of packet receive buffers needed by the adapter. During installation, the
RxBuffers value should be set to 32, the minimum number of buffers the driver
requires for each adapter. Although this setting affects adapter performance, it
allows installation of the operating system and up to eight adapters during initial
install. After installation is complete, you need to increase the number of buffers
allocated to the driver.
15. After NetWare 5.x/6.0 has been successfully installed, set the minimum packet
receive buffers parameter in the startup.ncf file to 1500 for each adapter in
the system. Set the maximum packet receive buffers to three times the
minimum packet receive buffers. Typically 4 MB of RAM is required per 1000
receive buffers.
16. In the autoexec.ncf file, delete the packet receive buffers parameter
(RxBuffers=32) in the load statement for this adapter. Deleting the receive
buffers phrase from the load statement resets the receive buffers parameter
to the default value of 200 for this adapter.
The server must be restarted for the new configuration.
ASUS PEB-G21 User Guide
28
Example: The default maximum number of receive buffers for the system is 500; the
default minimum is 128. Edit the startup.ncf file to have the following entries. The
actual numbers will be a function of the number of ports in the system. The following
is an example for a system with 8 ports installed:
set maximum packet receive buffers = 36000
set minimum packet receive buffers = 12000
ASUS PEB-G21 User Guide
29
Installing Novell NetWare Server 6.5 Driver Software
The following instructions outline the installation of Novell NetWare Server 6.5
driver software. If you need instruction on installing Novell NetWare Server 4.2,
5.x, or 6.0 driver software, please proceed to Installing Novell NetWare Server 4.2/
5.x/6.0 Driver Software.
Please ensure that the server has the latest support pack available installed. The
You may want to create an archive disk by copying all the files from the
CDROM\NetWare\Driver directory onto a floppy disk. If you choose to use the CD-
ROM directly, ensure that the CDROM.NLM is loaded and that you are aware of the
NetWare Volume name for the CD ROM that you just installed.
1.
2.
From the NetWare Server console, type HDETECT and press Enter.
From Options, press Enter to accept Platform Support Module and HotPlug
Support Module and continue detecting devices.
3.
From Options, scroll down to select Modify and press Enter to change focus to
detected devices.
ASUS PEB-G21 User Guide
30
4.
5.
6.
Scroll down to Network boards and press Enter.
From Additional Driver Options, scroll down to Modify and press Enter.
Insert the CD or driver disk created using the Broadcom MakeDisk utility, and
select the Add option, by pressing Insert.
7.
8.
Select the Install an unlisted driver option, by pressing Insert.
If you are using the archive disk that you created, insert the disk into drive A:
and press Enter. If you have the CD ROM mounted as a NetWare volume, press
F3 and enter <Volume Name>: NetWare\Driver as the source path. Where
<Volume Name> is the name of the NetWare Volume for the CD-ROM and
NetWare\Driver is the directory of the specific files on the CD-ROM needed for
this installation.
9.
The name of the driver displays.
10. Press Down Arrow or Tab to switch back to Additional Driver Options.
11. Choose Return to driver summary and press Enter.
12. Choose Continue in Options .
13. Choose Continue from Protocol Options unless you want to configure and bind
protocols before continuing. Installation is now complete.
ASUS PEB-G21 User Guide
31
Installing Solaris Driver Software
The driver for Solaris 8.0 is released in three formats:
1.
2.
3.
BRCMbcme.pkg : Datastream format
BRCMbcme.tar.Z : Compressed and TAR file system format
bcmedu.img : Driver Update (DU) binary image which is used to create DU
diskette.
Installing the Driver
1.
2.
or
Change directory to where BRCMbcme.pkg resides
pkgadd -d BRCMbcme.pkg
Copy BRCMbcme.tar.Z to /tmp
cd /tmp
uncompress BRCMbcme.tar.Z
tar xvf BRCMbcme.tar
pkgadd -d /tmp
ASUS PEB-G21 User Guide
32
3.
4.
5.
Execute prtconf to determine instance number of the NIC.
ifconfig bcme[instance_number] plumb
ifconfig bcme[instance_number] ip_address netmask....
To make these changes permanent, follow these steps:
1.
2.
Use a text editor (e.g., vi) and create a file named
hostname.bcme[instance_number] in the /etc directory. Add the IP address of
the interface to this file, then save and exit.
Add a proper subnet mask to the file /etc/netmasks.
In Solaris 7.0 (Intel platform), the operating system only allocates 36 pages of 4K
physically contiguous memory. The driver needs about 130K of physically contiguous
memory per NIC. In order to use more than one NIC the O/S has to allocate more
memory. This can be done by setting an O/S system variable "lomempages" in /etc/
system. For instance, when 4 NICs are installed in a Solaris 7 system, the physically
contiguous memory is calculated as follows:
4 NICs * 130K = 520 K ==> 130 pages of 4K is required.
ASUS PEB-G21 User Guide
33
Since this memory might be used by other driver in the system, 200 of 4K of
memory is allocated. Add the following line in file /etc/system:
set lomempages=200
ASUS PEB-G21 User Guide
34
Installing the UNIX Driver Software: SCO OpenServer 5.0.7
Overview
This procedure describes the installation of the SCO OpenServer driver. This driver is
released as a media image file containing the driver package. The media image file
can be copied to the target machine directly for installation, or from an installation
diskette that you can create.
Creating a Diskette
1.
2.
Copy the file VOL.000.000 to an SCO system.
Create a diskette using: dd if=VOL.000.000 of=/dev/rfd0135ds18.
Installing the Driver
1.
Use custom or scoadmin software to install the SCO OpenServer driver from
the media image or from the floppy created above.
2.
After the package is installed, use netconfig to add the new network adapter.
ASUS PEB-G21 User Guide
35
3.
After added, modify the hardware configuration in Advanced Options to change
the Line Speed and Flow Control if desired. The settings for these properties
are listed below:
Line Speed
•
•
•
•
•
•
•
•
•
•
•
•
AutoNegotiate (default) (all speeds advertised)
Fixed HalfDuplex10
Auto HalfDuplex10 (only 10 Mbps half-duplex advertised)
Fixed FullDuplex10
Auto FullDuplex10 (only 10 Mbps full-duplex advertised)
Fixed HalfDuplex100
Auto HalfDuplex100 (only 100 Mbps half-duplex advertised)
Fixed FullDuplex100
Auto FullDuplex100 (only 100 Mbps full-duplex advertised)
Auto HalfDuplex1000 (only 1000 Mbps half-duplex advertised)
Fixed FullDuplex1000 (NOTE 1)
Auto FullDuplex1000 (only 1000 Mbps full-duplex advertised)
ASUS PEB-G21 User Guide
36
1000 Mbps (1 Gbps) full-duplex fixed speed is only valid for fiber connections. For
copper, twisted-pair connections, 1 Gbps can only be set through auto-negotiation
with a 1 Gbps partner.
Flow Control
•
•
•
•
•
Off
AutoNegotiate (Symmetric Pause advertised) (NOTE 2) (default)
RxPause
TxPause
RxPause/TxPause
1. Auto-negotiation of Flow Control is only valid when the Line Speed is set to
AutoNegotiate (all speeds advertised or single speed advertised).
2. A kernel relink and reboot is required before the new configuration will take
effect.
ASUS PEB-G21 User Guide
37
Installing the UNIX Driver Software: UnixWare/OpenUnix 8
Overview
This procedure describes the installation procedure for the UnixWare driver. The
driver is released as an installable package in datastream format.
Installing the Driver
1.
Do the following to install the bcme package on the Unixware system:
pkgadd -d <install-path>.
Where <install-path> is the full path name of the installable package bcme-
<version>.pkg.
2.
3.
After the package is installed, use netcfg or scoadmin network to add the new
network adapter.
When prompted, select the Line Speed and then select Advanced Option for
Flow Control, MAC Address , and Jumbo MTU Size settings, if desired. The
settings for these properties are listed below:
Line Speed
Auto-Negotiate (default) (all speeds advertised)
•
ASUS PEB-G21 User Guide
38
•
•
•
•
•
•
•
•
•
•
•
10 Mbps Half-Duplex Fixed
10 Mbps Half-Duplex Auto (only 10 Mbps half-duplex advertised)
10 Mbps Full-Duplex Fixed
10 Mbps Full-Duplex Auto (only 10 Mbps full-duplex advertised)
100 Mbps Half-Duplex Fixed
100 Mbps Half-Duplex Auto (only 100 Mbps half-duplex advertised)
100 Mbps Full-Duplex Fixed
100 Mbps Full-Duplex Auto (only 100 Mbps full-duplex advertised)
1000 Mbps Half-Duplex Auto (only 1000 Mbps half-duplex advertised)
1000 Mbps Full-Duplex Fixed (NOTE 1)
1000 Mbps Full-Duplex Auto (only 1000 Mbps full-duplex advertised)
1000 Mbps (1 Gbps) full-duplex, fixed speed is only valid for fiber connections. For
copper, twisted-pair connections, 1 Gbps can only be set through auto-negotiation
with a 1 Gbps link partner.
ASUS PEB-G21 User Guide
39
Flow Control
•
•
•
•
•
Disabled
Auto Negotiation (Symmetric Pause advertised) (NOTE 2) (default)
Receive Pause
Transmit Pause
Receive & Transmit Pause
ASUS PEB-G21 User Guide
40
ASUS Contact Information
ASUSTeK COMPUTER INC. (Asia-Pacific)
Marketing
Technical Support
Address:
15 Li-Te Road
Peitou, Taipei, Taiwan 112
MB/Others (Tel):
Notebook (Tel):
Desktop/Server (Tel):
Support Fax:
+886-2-2890-7121 (English)
+886-2-2890-7122 (English)
+886-2-2890-7123 (English)
+886-2-2890-7698
General Tel.: +886-2-2894-3447
General Fax: +886-2-2894-3449
Web Site:
ASUS COMPUTER INTERNATIONAL (America)
Marketing
Address:
Technical Support
Support Fax:
General Support:
Web Site:
44370 Nobel Drive, Fremont,
CA 94538, USA
+1-502-933-8713
+1-502-995-0883
usa.asus.com
General Fax: +1-502-933-8713
General Email: [email protected]
Support E-mail:
ASUS COMPUTER GmbH (Germany and Austria)
Marketing
Technical Support
Address:
Harkortstr. 25 D-40880 Ratingen,
BRD, Germany
Support Hotline:
+49-2102-95990 (Components)
+49-2102-959910 (Notebook PC)
+49-2102-959911
(for online support)
General Fax: +49-2102-9599-31
General Email: [email protected]
Support Fax:
Support (Email):
(for marketing requests only)
Web Site:
15-065091000
|