Installation
Instructions
ENFIELD
ON/OFF VALVE TRIM
T37370X
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
Certified to comply with ANSI A112.18.1M
ASSE 1016
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
M968663
ROUGHING-IN DIMENSIONS
Model 7001.000
Model 7011.000
1/2" NPT
3/4" NPT
35mm-59mm
60mm±13mm
(1-3/8 - 2-3/8)
(2-3/8 ± 1/2)
3/4'' NPT
70mm
70mm
(2-5/8)
MALE
(2-5/8)
52mm
52mm
THREADED
OUTLET
1/2" NPT
FEMALE
OUTLET
(2-1/8)
(2-1/8)
DIA. HOLE
DIA. HOLE
64mm
(2-1/2)
51mm
(2)
3/4" NPT
FEMALE
THREADED
INLET
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
FINISHED
WALL
FINISHED
WALL
Recommended Tools
Phillips Screwdriver
Flat Blade Screwdriver
CARE INSTRUCTIONS:
Remove as much surface dirt and film using clear
water and soft cotton cloth (as described above).
To keep your new faucet looking new, please follow
these simple care instructions:
Use any of the following to remove tough surface
film and build-up:
Mild liquid detergents
DO:
Simply rinse the faucet clean with clear water.
Dry the faucet with a soft cotton cloth.
Clear ammonia free liquid glass cleaners
Non-acidic, non-abrasive gentle liquid or fully
dissolved powder cleansers mixed according to
manufacturers directions.
DO NOT:
Do not use any abrasive cleaners, cloths, or
paper towels.
Non-abrasive liquid polishers
Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
Failure to follow these care instructions may
damage the Faucet's finish.
ENFIELD
ON/OFF VALVE TRIM
MODEL NUMBER
T37370X
012297-0070A
ESCUTCHEON
HOLDER KIT
A907621-YYY0A
ESCUTCHEON
A923348-0070A
HANDLE ADAPTER
A907293-YYY0A
M950118-420A
LEVER HANDLE
VALVE COVER
A918605-0070A
ESCUTCHEON HOLDER
SCREWS
M918318-0070A
HANDLE SCREW
M950119-420A
CROSS HANDLE
Replace the "YYY" with
appropriate finish code
CHROME
002
008
068
295
POLISHED NICKEL
BLACKENED BRONZE
SATIN NICKEL
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-12-00
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2007
M968663
|