HEXALYN™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
HEXALYN™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet ledge
Shown with 4801.862 Amarilis/Heritage faucet
with Triune handles (not included)
❏ 0485.013 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0485.027 Faucet holes on 4" (102mm) centers
❏ 0485.033 Center hole only
Nominal Dimensions:
543 x 489mm
(21-3/8" x 19-1/4")
610mm
(24)
51mm
203mm
(8)
(2)
OPTIONAL
Bowl sizes:
432mm (17") wide
305mm (12") front to back
73mm
(2-7/8)
FINISHED
WALL
OR
184mm
(7-1/4)
SPLASH BACK
152mm (6") deep
203mm
(8)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
489mm
(19-1/4)
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
851mm
(33-1/2)
686mm
(27)
MIN.
543mm
(21-3/8)
Vitreous China Fixtures
152mm
(6)
MAX.
COUNTERTOP (BY OTHERS)
SEALING
COMPOUND
11mm
(7/16)
BARRIER FREE
CLEARANCE
229mm
(9)
182mm
(7-3/16)
*
273mm
(10-3/4)
MIN.
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
327mm
(12-7/8)
*
178mm
(7)
203mm
(8)
SUPPLIES
AS REQ'D.
787mm (31)
851mm (33-1/2)
1-1/4 O.D.
WASTE
FINISHED
FLOOR
❏ Faucet Finish:
❏ Supplies:
1-1/4 O.D.
TAILPIECE
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
J36
© 2008 AS America Inc.
Revised 2/08
|