STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
STRATFORD 5-1/2' WHIRLPOOL AND
BATHING POOL
❏ 2470.028W Whirlpool Featuring System I:
®
• Americast brand engineered material
• Acid-resistant porcelain finish
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• End drain outlet
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
To Be Specified - Required:
❏
❏
❏
Color:
Bath Filler: (specify finish)
Bath Drain: 1583.470 (specify finish)
❏ 2470.128W Whirlpool Massage featuring
System I with Grab Bar Drilling
• Same as 2470.028W except with grab bar
drilling (grab bar must be ordered
seperately)
To Be Specified - Optional:
❏
❏
Safe-T-Heater*: 9075.120
Jet Trim Ring Kit: 9860.200-one per kit
(specify color) for Body Massage Jets only
Universal Tile Bead Kit: 751755-100
❏ 2470.028WC StayClean™ Whirlpool
Massage featuring System I
❏
• Same as 2470.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
❏ 2470.128WC StayClean™ Whirlpool
Massage featuring System I
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
• Same as 2470.128W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan® and grab bar
drilling (grab bar must be ordered
seperately)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
❏ 2470.002 Bathing Pool
❏ 2470.102 Bathing Pool with Grab Bar Drilling
• Same as 2470.002 except with grab bar
drilling (grab bar must be ordered seperately
• NFPA 258 for Smoke Density
Nominal Dimensions: 66" x 32" x 20"
(1676 x 813 x 508mm)
Bathing Well Dimensions: 60" x 27" x 18"
(1524 x 686 x 457mm)
NOTE: Roughing-in dimensions shown on reverse
side of page.
Americast® brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.
BV-36
© 2005 American Standard Inc.
Rev. 4/05
|