Alvin Indoor Furnishings LB1218 User Manual

ALVIN Satin-Glow Lightboxes  
Instructions for Cutting Glass  
1
8
• Double-strength window glass*  
• Thickness: ⁄ "  
• Chamfer smooth all edges  
MODEL No.  
Cut Glass to This Size  
15  
15  
16  
16  
LB1218  
LB1620  
LB1824  
LB2436  
11 ⁄ " x 17 ⁄ "  
15 15  
16  
16  
15 ⁄ " x 19 ⁄ "  
15  
15  
16  
16  
17 ⁄ " x 23 ⁄ "  
15  
15  
16  
16  
23 ⁄ " x 35 ⁄ "  
IMPORTANT NOTE  
It is highly recommended that these dimensions be  
double-checked against your lightbox before cutting glass.  
* It is best to purchase glass from a glass dealer rather than a hardware or home center.  
Care and Use Instructions  
1. To install glass, remove the two aluminum  
strips on the top surface of the lightbox. For  
your own safety, use gloves when handling  
glass. Place the glass on top of the Plexiglas  
sheet and replace the aluminum strips.  
2. To operate, depress the on/off switch and  
hold for one or two seconds until the lights  
illuminate. Note: Bulbs may loosen during  
shipping. If bulbs don’t illuminate check that  
they are properly seated in fixture.  
3. The Satin-Glow Lightbox is designed to  
operate on 110V AC, 60 cycle. Please do  
not use any other power source.  
4. Removal of the back panel or tampering  
with the electrical circuitry will void the  
warranty and releases the manufacturer  
from all responsibility for damages, loss  
of property and/or personal injury.  
To Replace Fluorescent Tubes  
1. “Daylight” bulbs with CRI of 70 or  
greater are recommended. Always use  
direct replacement lamps in order to  
prevent overheating.  
4. Remove the hold-down screws and lift  
off the light diffusers.  
5. Remove and replace fluorescent tubes.  
6. Return diffusers, glass and Plexiglas  
panels to their original positions.  
Re-install aluminum strips and screws.  
2. Disconnect the power cord.  
3. Remove the screws and aluminum strips from  
the top surface of the lightbox. Carefully  
remove glass and Plexiglas panels.  
Degrees of Illumination  
MODEL No.  
Lumens  
per Tube  
Tubes  
per Box  
Lumens at  
Light Box Surface  
LB1218  
LB1620  
LB1824  
LB2436  
650  
650  
650  
1750  
1 F15T8  
2 F15T8  
2 F15T8  
3 F30T8  
650  
1300  
1300  
5100  
All electrical components are U.L. listed.  
Alvin & Company, Inc.  
Bloomfield, CT  
Grand Prairie, TX  
 

Abocom Network Router ISM56CL User Manual
ADC Network Router Building Entrance Terminals BET User Manual
AEG Cooktop 6510K7 M User Manual
AEG Washer L61270BI User Manual
Agilent Technologies Network Router 87075C User Manual
Aiphone Speaker System LAF 10S User Manual
Alto Shaam Kitchen Entertainment Center 2020W User Manual
Aspen Touch Solutions Computer Monitor ATM 123R Series User Manual
Audiovox Automobile Alarm PRO 9232A User Manual
Axis Communications Computer Hardware AXIS 243Q User Manual