AT-6102
IEEE 802.3af Universal
Multi-voltage PoE Splitter
Installation and User Guide
PN 613-000635 Rev A
Contents
Electrical Safety and Emissions Standards...................................................................................2
Safety and Electromagnetic Emissions Certifications ..............................................................2
Contents ......................................................................................................................................3
Figures...................................................................................................................................3
Preface........................................................................................................................................4
Purpose of This Guide............................................................................................................4
How This Guide is organized..................................................................................................4
Document Conventions ..........................................................................................................4
Where to Find Web-based Guides..........................................................................................4
Contacting Allied Telesis..............................................................................................................5
Online Support .......................................................................................................................5
Email and Telephone Support.................................................................................................5
Returning Products.................................................................................................................5
Sales or Corporate Information...............................................................................................5
Management Software Updates..............................................................................................5
Tell Us What You Think..........................................................................................................5
Chapter 1.....................................................................................................................................6
Introduction ............................................................................................................................6
Features.................................................................................................................................6
Hardware description..............................................................................................................6
Package Content....................................................................................................................7
Chapter 2.....................................................................................................................................8
Installation..............................................................................................................................8
Specifications.........................................................................................................................8
Figures
Figure 1: AT-6102 typical application..........................................................................................6
Figure 2: The Data In & Data Out/Power Out ports.....................................................................6
Figure 3: Power LED Indicator....................................................................................................7
Figure 4: DIP Switch...................................................................................................................7
Figure 5: Package content..........................................................................................................7
AT-6102 Installation and User Guide
3
Preface
Purpose of This Guide
This guide is intended for network administrators who are responsible for installing and maintaining
the AT-6102 IEEE 802.3af PoE Splitter.
How This Guide is organized
This guide contains the following chapters and appendices:
Chapter 1
Introduction: describes the features, functions, LEDs, and ports on the
equipment.
Chapter 2
Installation: describes how to install the equipment.
Specifications: provides equipment specifications.
Document Conventions
This guide uses several conventions that you should become familiar with before you begin to install
the product:
ꢀ
Note
A note provides additional information. Please go to the Allied Telesis website
www.alliedtelesis.com for the translated safety statement in your language.
Warning
A warning indicates that performing or omitting a specific action may result in bodily injury.
Caution
A caution indicates that performing or omitting a specific action may result in equipment
damage
or loss of data.
Where to Find Web-based Guides
The installation and user guides for all Allied Telesis products are available in portable document
online or download them onto a local workstation or server.
AT-6102 Installation and User Guide
4
Contacting Allied Telesis
This section provides Allied Telesis contact information for technical support as well as sales and
corporate information.
Online Support
You can request technical support online by accessing the Allied Telesis Knowledge Base:
http://www.alliedtelesis.com/kb/. You can use the Knowledge Base to submit questions to our
technical support staff and review answers to previously asked questions.
Email and Telephone Support
For Technical Support via email or telephone, refer to the Support & Services section of the Allied
Warranty
For product registration and warranty conditions please visit Allied Telesis website:
Returning Products
Products for return or repair must first be assigned a return materials authorization (RMA) number.
A product sent to Allied Telesis without an RMA number will be returned to the sender at the
sender’s expense.
To obtain an RMA number, contact Allied Telesis Technical Support through our web site:
Sales or Corporate Information
You can contact Allied Telesis for sales or corporate information through our web site:
http://www.alliedtelesis.com/. To find the contact information for your country, select Contact Us
-> Worldwide Contacts.
Management Software Updates
New releases of management software for our managed products are available from either of the
following Internet sites:
•
Allied Telesis web site: http://www.alliedtelesis.com/support/software/
Allied Telesis FTP server: ftp://ftp.alliedtelesis.com/
•
If you prefer to download new software from the Allied Telesis FTP server from your workstation’s
command prompt, you will need FTP client software and you must log in to the server. Enter
“anonymous” for the user name and your email address for the password.
Tell Us What You Think
If you have any comments or suggestions on how we might improve this or other Allied Telesis
documents, please contact us at http://www.alliedtelesis.com.
AT-6102 Installation and User Guide
5
Chapter 1
Introduction
Thank you for purchasing the AT-6102 IEEE 802.3af PoE Splitter.
The Power over Ethernet Splitter allows a network device that is not POE capable to be remotely
powered through an 802.3af compliant line. The following figure shows how Power over Ethernet
Splitter works.
Non PoE devices
AT-6102
AT-6101
Figure 1: AT-6102 typical application
Features
•
•
•
•
•
•
•
•
•
IEEE802.3af compliant
Short circuit protection
Delivering power and data to equipment
5V, 7.5V, 9V & 12V DC User selectable output voltage
Plug-and-Play
Light weight and compact size
Easy table top and wall mounting
Self-sticking Velcro strips for attaching to powered device
For Wireless AP, Bluetooth AP, IP Camera, VoIP Telephones and any other remote power
feeding application
•
•
•
•
Regulated output voltage
RoHS and WEEE compliant
CE, FCC, GOST, C-Tick Approved
UL Listed
Hardware description
The Power over Ethernet Splitter has three connection ports, one LED indicator, and a Dipswitch
for voltage adjusting.
•
Data In port: It is a RJ-45 Ethernet interface port for connection to an 802.3af compliant data
and power source like a POE injector or a POE capable LAN Switch.
•
Data Out port: It is a non detachable 315mm long cable terminated with an RJ-45 plug. It
carries the Ethernet signal to the powered device.
Figure 2: The Data In & Data Out/Power Out ports
AT-6102 Installation and User Guide
6
•
•
Power Out port: It supports two types of power cable – Inner dimension 5.5 x 2.0mm, length
360 mm and 5.5 x 2.5 mm, length 360mm. Both cables are included in the POE Splitter
package. The Power Out port is capable of feeding 5V, 7.5V, 9V or 12V DC power to the
device.
LED indicator: one Power LED indicator for the system unit. It is located on the topside of the
Power over Ethernet Splitter
Figure 3: Power LED Indicator
•
Dipswitch: It allows the user to select the output DC voltage among four different values 5V,
7.5V, 9V and 12V. The POE Splitter comes factory set at 5V. Before changing the output
voltage level the POE Splitter must be switched off disconnecting the POE RJ-45 cable from
the Data In port.
Figure 4: DIP Switch
Package Content
Check your router package for the following items. If an item is missing or damaged, contact your
Allied Telesis sales representative for assistance.
1 x PoE Splitter
1 x DC Power Jack 5.5 x 2.0 mm, length 360 mm
1 x DC Power Jack 5.5 x 2.5 mm, length 360 mm
1 pair of self sticking Velcro Strips
This Installation and User Guide
Figure 5: Package content
AT-6102 Installation and User Guide
7
Chapter 2
Installation
To install the Power over Ethernet Splitter, please follow the following steps in this exact order:
1. Select on the POE Splitter an output Voltage compatible with the device to be powered. Be
aware that Voltage DIP switch is factory set on 5V. When you change voltage by DIP
switching to different voltage, the Power over Ethernet Splitter must be in power off status.
2. Connect the Data In port on the Power over Ethernet Splitter to a PoE capable LAN Switch or
to the Data Out port of a POE Injector.
3. Choose the power cable (Internal Diameter 2.0mm or 2.5mm) and plug it into the Power Out
port on the Power over Ethernet Splitter.
4. Plug in the other end of the PoE Splitter’s power cable to the device to be powered (Access
Point, VoIP Phone, IP Camera …).
5. Connect the Data Out RJ-45 plug of the PoE Splitter to the powered device (Access Point,
VoIP Phone, IP Camera, …)
Specifications
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
Standard
IEEE802.3af Power over Ethernet
2 power cables with straight plug
Plug dimensions: 5.5 x 2.0mm, 5.5 x 2.5mm length 360mm each
4 segments switch for output voltage select.
Data and Power in pin usage :
Power jack diameter
Adjust Switch
Data In & Power In
Connector
Power : 4 & 5(V+), 7 & 8 (V-) ; 1,&2(V+), 3&6(V-)
Data :1 & 2, 3 & 6
Data Out Connector
Power Out Connector
Data only out: 1 x RJ-45, Data pin 1,2,3,6
Power out jack: 5V, 7.5V, 9V, 12V (User Adjustable)
Maximum feeding current: 2.0A@5V
Maximum output power: 10W
10BASE-T: 2 or 4-pair UTP/STP Cat.3, 4,5 cable EIA/TIA-568 100-ohm
(100m)
100BASE-TX: 2 or 4-pair UTP/STP Cat.5 cable EIA/TIA-568 100-ohm
(100m)
System: power (green)
Network Cables
LED
Power Input
DC 48V
Temperature Range: 0°C~ 40°C
Humidity: 90% (non-condensing)
Temperature Range: 0°C~ 70°C
Humidity: 90% (non-condensing)
80mm x 55mm x 26mm (L x W x H) (main device only)
Operating conditions
Storage conditions
Dimension
EMI & Safety
certifications
Other Certifications /
Markings
CE, FCC, UL, GOST, C-Tick
WEEE, RoHS
AT-6102 Installation and User Guide
8
|