ACCUSPLIT®
E X C L U S I V E
AX602
STOPWATCH
ACCUSPLIT, Inc.
6120 Stoneridge Mall Rd., Suite 210
Pleasanton, CA 94588 USA
800-965-2008 • 925-226-0888 • FAX 925-463-0147
OPERATING
INSTRUCTIONS
980-312
• LARGE-SIZED THREE-ROW DISPLAY PANEL
ACCUSPLIT® AX602
DIGITAL 100 MEMORY STOPWATCH
WITH SPLIT AND LAPTIME MEASUREMENT AND
STROKE/FREQUENCY MEASURING FUNCTIONS
Total elapsed time, split time and lap time are displayed at the same
time in separate rows, and they can be measured successively
without releasing split or lap time measurement.
• MEMORY FUNCTION
Up to 100 measurements can be stored in memory, and they can be
recalled after the measurement is over.
FEATURES
The Quartz Stopwatch is a digital
stopwatch featuring memory and
stroke/frequency measuring func-
tions. In addition, the stopwatch
is water resistant. Therefore, it is
suitable for aquatic sports or use
in rainy weather.
• TIME/CALENDAR DISPLAY
Year, month, date, hour, minutes, and seconds can be displayed while
the stopwatch is not in use.
• BATTERY LIFE INDICATOR
Lithium battery CR2032 or equivalent is used.
• ACCUSPLIT “X” CASE
Exclusive professional case with no-fail buttons.
• STOPWATCH
The stopwatch can measure up
to 10 hours in 1/100 seconds.
• SPLIT TIME/LAP TIME
MEASUREMENT
Up to 100 split times and lap
times can be measured.
2
3
2. ACCUMULATED ELAPSED TIME MEASUREMENT
START STOP
• “Split time” refers to an elapsed time required to cover a distance from
the start to a given point.
• “Lap time” refers to an elapsed time required to cover a given section
of the whole distance.
RESTART
A
A
Lap time
Start
Split time
1. STANDARD MEASUREMENT
RESET
STOP
START
STOP
RESET
B
A
A
A
B
Restart and stop
of the stopwatch
can be repeated
by pressing “A”.
Hour
Seconds
Minutes
1/100 seconds
8
9
SPLIT-LAP 2
3. SPLIT TIME/LAP TIME MEASUREMENT
4. HOW TO USE THE MEMORY FUNCTION
B
The stopwatch can store up to 100 split times, 100 lap times and total elapsed
time. They are automatically entered into the memory.
• With each press of “C”, the time stored is recalled. The time can be
recalled successively by keeping the button pressed.
START
SPLIT-LAP 1
Split time
Lap time
A
B
C
C
C
Accumulated
elapsed time
Split/lap number
The split/lap time can
be measured repeated
by pressing “B”.
RESET
STOP
“RECALL” more
C
SPLIT-LAP 8
B
A
B
A
B
Finish time
Reset to “00”
Finish time
Note: When the number of stored measurements
• To stop the recall of the stored data, press “A”, “B”, or “D”. The
exceeds 90, flashing “FULL” appears, and when
it exceeds 100, a warning sound starts beeping.
measurements when the stopwatch was stopped will be shown.
Then, press “B” to reset the digits to “00”.
10
11
STOKE/FREQUENCY MEASURING
• The time stored in the memory can be recalled even while the stopwatch
is measuring.
Press “D” to show the STROKE/FREQUENCY MEASURING display.
Start the measurement by pressing “A” and stop the measurement by pressing
“A” after the third stroke was made. The number of strokes per minute will be
displayed.
With each press of “C”
When the stopwatch is stopped
When the stopwatch is measuring
Split time and lap time are recalled
starting with the first ones.
Start
Stop
Measuring
Reset
The times are recalled starting with
the last ones.
B
A
A
B
• To measure the lap time and split time while the stored data are being
recalled operate the buttons as follows.
A
B
Press “B” to measure new lap time and split time.
Press “A” to stop the measurement.
Start
Stop
Press “D” to return to the measurement mode.
STROKE/
FREQUENCY
MEASURING
mode
The number
of strokes
per minute
(23.2)
Notes:
1. Even if the digits are reset to “00”, stored times are not erased and can be
recalled by pressing “C” unless new measurement is started.
2. If the stopwatch is left untouched with the recalled times shown, the display
will automatically return the STOPWATCH display in 1 to 20 minutes.
12
13
Notes:
REGISTER NOW Please return
your AX602 Registration to the
Repair Center address in the
warranty, and we will let you
know about future products.
Email (preferred)
User
1. During 1 second after the measurement has been started by pressing “A”,
flashing “180.0” is displayed. If the measurement is stopped by pressing
“A” during this period, “Err” will appear. If the measurement is not stopped
by pressing “A” after more than 18 seconds have elapsed, “Err” will
automatically appear. Therefore, note that measurable number of strokes
per minute is between 10 and 180.
NO-PROOF-OF-PURCHASE LIMITEDWARRANTY
See label on back of unit for details, or check
Error
2. If “B” is pressed while the measurement is stopped or “Err” is shown, the
digits will be reset “0.0”. Even if the digits are not reset to “0.0” with the
measurement stopped or “Err” shown on the display, the measurement
can be started by pressing “A”.
14
15
|