Abocom Network Card RE450 User Manual

10M Ethernet  
PC Card Adapter  
Quick Installation Guide  
 
INTRODUCTION  
The PCMCIA Ethernet card is a credit-card-size Type  
II PCMCIA Ethernet adapter that complies with the  
PCMCIA 2.1 and IEEE 802.3 standards.  
It works with computers that incorporate a compatible  
interface. The drivers associated with this card allow  
you to use the most popular Network Operating System  
(NOS) in the PC environment very easily.  
System Requirement  
An IBM compatible PC with 386SX or higher  
At least one type II PCMCIA socket  
Drivers and utilities provided with this product  
PCMCIA release 2.1 compliant Card Services and  
Socket Services  
10BaseT or 10Base2 Ethernet connectivity to your  
LAN.  
SPECIFICATIONS  
IEEE 802.3 10BaseT, 10Base2  
10Mbps speed  
Internal buffer memory, No system memory used  
NE2000 compatible ODI client, Packet driver and  
NDIS version 2.x, 3.x driver supported  
Operating Environment  
Novell Netware 3.x, 4.x  
Microsoft LAN Manager  
Packet Driver Applications  
Microsoft Windows for Workgroups 3.11,  
Windows 3.1  
Microsoft Windows NT 3.51, NT 4.0  
- 1 -  
 
Windows 95  
Windows 98  
Windows ME  
Windows 2000  
Windows XP  
Lantastic 6.0  
IBM OS/2 Warp Version 3  
Physical Specification  
PCMCIA Type II  
3.37 in. x 2.128 in. x 0.197 in.  
85.6mm x 54mm x 5mm  
Weight: 35 g  
Power: +5V ±5%, @150mA  
- 2 -  
 
INSTALLATION  
Hardware Connections  
1. Insert the PCMCIA Ethernet card into the  
PCMCIA slot with the 68 pin connector toward  
your notebook’s PCMCIA slot and the label  
facing up.  
2. Connect the media coupler to the PC card’s 15-pin  
connector.  
3. Connect one end of an Ethernet cable to the  
coupler media. Plug the other end of the cable into  
a switch hub.  
Software Installation  
Insert the driver diskette into the floppy drive and set  
the current drive to the floppy drive. Then run  
INSTALL to install the real mode drivers such as ODI  
or NDIS 2.x or Packet Drivers into the target disk.  
Windows 95 Installation  
Make sure that the drivers of PCMCIA slot are well  
installed. The System Icon in the Control Panel can  
report on its functionality. Apart from above mentioned,  
any questions on this layer need to be taken up with the  
computer's manufacturer.  
1. Insert PCMCIA Ethernet Card into PCMCIA slot.  
In New Hardware Found dialog box, select Driver  
from disk provided by hardware manufacturer”.  
- 3 -  
 
2. Please input the path, A:\ and insert driver diskette.  
The driver will be installed and you may be asked  
for the original Windows 95 CD/disks.  
3. For the first time installation, please click Network  
icon in Control Panel to add Protocols, Client and  
Service if you needed  
4. Reboot the machine and the card will be fully  
functional.  
Windows 98 Installation  
Make sure that the drivers of PC Card slot are well  
installed. The System Icon in the Status Area can  
report on its functionality. Apart from which is  
mentioned above, any questions on this layer need to  
be taken up with the computer's manufacturer.  
1. Once the PC Card is connected to your computer,  
Windows will automatically detect the new device.  
Windows will prompt an ADD NEW  
HARDWARE WIZARD dialog box, then press  
Next.  
- 4 -  
 
2. Select Search for the best… and press Next.  
3. Select Floppy disk drives and insert driver  
diskette. Then press Next, the driver will be  
installed.  
4. Click Next to continue. Windows will start to  
copy the appropriate driver to your system. If  
Windows asks you to supply your original  
Windows 98 installation CD-ROM, load it in the  
CD-ROM drive.  
5. For the first time installation, please click  
Network icon in Control Panel to add Protocols,  
Client and Service if you needed.  
6. Reboot the machine and the card will take effect.  
- 5 -  
 
Windows ME Installation  
1.  
Once the PC Card is connected to your computer,  
Windows will automatically detect the new  
device. Insert the device Driver Disk into the  
floppy disk drive of your system. Select  
Automatic search for  
a
better driver  
(Recommended) and click Next.  
2
3
Windows will copy the appropriate driver to your  
system. If Windows ME asks you to supply your  
original Windows ME installation CD-ROM, load  
it in the CD-ROM drive.  
Click Finish to complete the software installation.  
- 6 -  
 
Windows NT 4.0  
1. Make sure that the Network Services already  
installed in the NT 4.0 system.  
2. Insert the Ethernet Adapter into one of the  
system's PCMCIA Slots  
3. Power up Windows NT 4.0  
4. Open My Computer  
5. Open Control Panel  
6. Run the Network  
7. Select Adapters page  
8. Press Add to add network adapter  
9. Press Have Disk button  
10. Insert the driver disk into drive A:  
11. Specify the path to ” A:\ and press OK  
12. A dialog box will appear to adjust the  
driver's settings. The resources assignment to the  
adapter must be unique in the system.  
13. Press OK when all settings are completed. Press  
Close to complete network setting.  
Windows 2000 Installation  
1. Connect one end of the cable for the PCMCIA  
Ethernet card to your computer and the other end  
to the port of the new hardware device. Windows  
will appear the following picture. Click Next.  
- 7 -  
 
2. Select Search for a suitable driver for my  
device (recommended). Click Next.  
3. Select Floppy disk drives and insert the disk  
associated with the PCMCIA Ethernet card in the  
disk drive. Click Next.  
- 8 -  
 
4. Click Next to make Windows install the  
appropriate driver for the new device.  
5. Click Yes to continue.  
- 9 -  
 
6.  
Click Finish to complete the software  
installation.  
Windows XP Installation  
1
Once the device is connected, Windows will  
automatically detect the new device. Insert the  
device Driver Disk into the floppy disk drive of  
your system.  
Click Install the software  
automatically (Recommended) and click Next.  
- 10 -  
 
2.  
Click Continue Anyway to proceed.  
3.  
4
Wait while Windows copies the appropriate  
driver to your system.  
Click Finish to complete the software installation.  
- 11 -  
 
- 12 -  
 

Abit Computer Hardware IC7 MAX3 User Manual
AEG Refrigerator 1450 7 TK User Manual
AeroComm Network Card CL4490 1000 User Manual
Agri Fab Spreader 45 0364 User Manual
Air King Ventilation Hood GRANADA User Manual
AMD Computer Hardware K3780E User Manual
AMX Stud Sensor IRX SM+ User Manual
Audiovox Remote Starter APS 650RS User Manual
Axis Communications Security Camera Q1615 E User Manual
Axis Communications Security Camera Q7424R User Manual