FEATURES
• High Quality US 2nd or 3rd gen. light intensifier tube
• Super fast lens system provides the user with a clear and sharp image
• Dual eye viewing system for long viewing sessions
• Built-in Infra Red illuminator lets you see even in total darkness
• Interchangeble lenses for different magnification
• Head or helmet mounted for hands free use
• Rugged and versatile design
• Easy to use digital controls
• Two years warranty (optional extended warranty)
SPECIFICATIONS
Magnification ..................................................1X (4X with doubler)
Intensifier tube................................................US Gen. 2+ or Gen.3
Detection range ..............................................100(Gen.2) or 180(Gen.3) m/y
Recognition range ..........................................150(Gen.2) or 200(Gen.3) m/y
Lens System...................................................35 mm; F1:1.2
Field of view....................................................40°
Range of Focus...............................................0.25m to
Power Supply..................................................1.5 volt AA size
Battery Life .....................................................10 hours
Operating Temp..............................................-30°F to +110°F
Dimensions.....................................................172x62x102 mm (6.7” x 2.5” x 4”)
Weight.............................................................0.45kg (0.9 lb)
APPLICATION
PVS-7 goggles (standard PVS-7 is 50% heavier and 100% larger). Rugged (metal not plastic),
and a top-notch performer the NVG7 is an exceptional choice for hands free usage.
The NVG-7 goggles have a built in IR for total darkness with indicator “ON” light within the FOV
and a flip-up headset.
The NVG7 is available with a wide range of image intensifier options to meet a wide array of
specification requirements.
The NVG-7 night vision goggles is a complex opticoelectronic system for individual use. The
device consists of the objective lens assembly, eyepiece and the body. The body contains a
image intensifier tube assembly with an integrated high voltage power source and the battery
housing.
Objective lens protective cover (not shown) is intended to protect the objective lens from dust
and scratches. It also will act as a daylight filter, allowing you to test the scope in daylight or
other bright light situations. The pinhole in the center of the protective cover allows the user to
check the operation ability of the device in daylight conditions.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for
more than ten (10) minutes.
2
OPERATION
• Take the monocular out of the case.
• Install the battery into the housing with the polarity order as shown on the scope. Battery
Type: 1.5 Volt, AA size .
• Press the button (short press - less than 1.5 sec.) to turn the unit on by the protective lens
cover still attached to the lens. Do not turn the unit on in the daytime without the protec-
tive lens cap on. You should see green glow in the eyepiece.
• Observe the scene and adjust the diopter for optimal image clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus.
You should not have to readjust the diopter.
• To turn the unit off, push the button again by short press (less than 1.5 sec.).
FOCUSING
To focus the NVG-7, first you will need to adjust
the diopter. Simply turn the diopter clockwise until
it stops. Then, while looking throught the diopter
at an object, slowly turn the diopter back counter
clockwise until the grain in the image is sharp.
Diopter adjasting
NOTE: We suggest that you focus the diopter
during daylight with the filter on.
Next focus the front lens until the image and the
grain are both sharp. When you are in low-light
conditions and the daylight filter is off, you may
focus the front lens to receive sharp image, the
diopter should not be adjusted.
Lens focus
adjusting
NOTE: The front lens should be readjusted as you
view objects at different distances.
INFRA-RED ILLUMINATOR
Infra-red illuminators, or IR illuminators, are common to
night vision. The IR light greatly enhances the perform-
ance of the NVG-7 while remaining almost totally invis-
ible to the naked eye.
The NVG-7 goggles have a built in IR with indicator “ON”
light within the FOV. To turn the IR on, push the button
by long press (more than 1.5 sec.). It is important to
remember that the IR illuminator is simply an infra red
light source, and like any light source, it may loose its
effectiveness over a great distance.
Built-in Infra-red
Illuminators
To turn the IR off, push the button again by long press
(more than 1.5 sec.).
NOTE: The IR will automatically turn off when the unit’s power is turned off.
3
FLIPUP HEADSET
PART I
1) The first step that you want to take in mounting NVG-7 on your head is to fit the headgear to
your size. Adjust the headgear fist befor attaching the NVG-7 to it.
2) Loosen all the straps and plase the headgear on
your head.
3) You will want to tighten the straps.
PART II
Now you are ready to mount the NVG-7 on to your
headgear.
1) Remove the already adjausted headgear from your
head.
2) Slide the NVG-7 on to the rail.
F100 FRONT LENS
(optional)
The NVG-7 with F100 front lens can be used as a powerful night
vision bi-ocular.. To change the front lens unscrew the front lens
off the body of the NVG-7 (make sure that the unit is turned off).
Screw the F100 lens.
F100 Front Lens
STORAGE AND CARE
• If the device is not to be used for extended period of time (more than 10 days) remove the
battery.
• Avoid touching lenses. If fingerprints or traces of dirt or dust appear, clean their surface with
a Photographic lens cleaning tissue.
• Keep lens cap/daylight filter on when not in use.
• The NVG-7 is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and eyepiece: it will void your warranty.
• Evaluate the scope function by looking through it in a lit environment with the daylight filter
lens cap on. Never use in daylight without the daylight filter lens cap on.
• Never point the NVG-7 at a bright light source.
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light
(moon or starlight) may diminish the effective viewing distance.
4
TROUBLE SHOOTING
Q: Flashes, flickers, or clicking occur while operating
S: If it occurs within the first five minutes of inserting new batteries, it is normal and the device
will resume normal operation soon thereafter. If it occurs for more than 10 minutes, contact for
service instructions.
Q: Dark spots on screen.
S: These are either cosmetic blemishes in the intensifier tube or dust particles.
Q: Screen becomes darker than at previous use.
S: Replace batteries. If problem persists, contact your dealer or other authorized service rep-
resentative for service instructions.
Q: Image not clear.
S: Adjust objective lens, and/or the eyepiece.
5
2 YEAR PRODUCT WARRANTY
This product is guaranteed to be free from manufacturing defects in material and workmanship
under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that
is covered by the foregoing warranty occurs during the applicable period stated above, ATN, at its
option, will either repair or replace the product, and such action on the part of ATN shall be the full
extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not
cover a product (a) used in other than its normal and customary manner; (b) subjected to misuse;
(c) subjected to alterations, modifications or repairs by the Customer of by any party other than ATN
without prior written consent of ATN; (d) special order or “close-out” merchandise or merchandise
sold “as-is” by either ATN or the ATN dealer; or (e) merchandise that has been discontinued by the
manufacturer and either parts or replacement units are not available due to reasons beyond the con-
trol of ATN. ATN shall not be responsible for any defects or damage that in ATN’s opinion is a result
from the mishandling, abuse, misuse, improper storage or improper operation, including use in con-
junction with equipment which is electrically or mechanically incompatible with or of inferior quality
to the product, as well as failure to maintain the environmental conditions specified by the manufac-
turer. CUSTOMER IS HEREBY NOTIFIED THAT OPERATION OF THE EQUIPMENT DURING
DAYLIGHT HOURS OR UNDER ANY EXCESSIVE LIGHT CONDITIONS MAY PERMANENTLY
DAMAGE THE INTERNAL COMPONENTS OF THE UNIT AND SAID DAMAGE WILL NOT BE
COVERED UNDER THIS WARRANTY. This warranty is extended only to the original purchaser.
Any breach of this warranty shall be waived unless the customer notifies ATN at the address noted
below within the applicable warranty period.
The customer understands and agrees that except for the foregoing warranty, no other warranties
written or oral, statutory, expressed or implied, including any implied warranty of merchantability or
fitness for a particular purpose, shall apply to the product. All such implied warranties are hereby
and expressly disclaimed.
LIMITATION OF LIABILITY
ATN will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or
liabilities arising out of the use of this product. Operation and use of the product are the sole respon-
sibility of the Customer. ATN’s sole undertaking is limited to providing the products and services
outlined herein in accordance with the terms and conditions of this Agreement. The provision of
products sold and services performed by ATN to the Customer shall not be interpreted, construed,
or regarded, either expressly or implied, as being for the benefit of or creating any obligation toward
any third party of legal entity outside ATN and the Customer; ATN’s obligations under this Agree-
ment extend solely to the Customer. ATN’s liability hereunder for damages, regardless of the
form or action, shall not exceed the fees or other charges paid to ATN by the customer or
customer’s dealer. ATN shall not, in any event, be liable for special, indirect, incidental,
or consequential damages, including, but not limited to, lost income, lost revenue, or lost
profit, whether such damages were foreseeable or not at the time of purchase, and whether
or not such damages arise out of a breach of warranty, a breach of agreement, negligence,
strict liability or any other theory of liability.
PRODUCT WARRANTY REGISTRATION
In order to validate the warranty on your product, ATN must receive a completed Product Warranty
Registration Card for each unit. Please complete the form below and immediately mail it to our
Service Center: ATN Corporation, 20 South Linden Ave., Suite 1B, South San Francisco CA 94080.
Products qualifying for warranty repair will be either repaired or replaced within 10 business days of
receipt of merchandise unless the customer is notified otherwise.
OBTAINING WARRANTY SERVICE
To obtain warranty service on your unit, take or send the product, postage paid, with a copy of your
sales receipt to our service center, ATN Corporation at the address noted above. All merchandise
must be fully insured with the correct postage; ATN will not be responsible for improper postage, or,
missing or damaged merchandise during shipment.Lortie el del ing exercil ex eummy nosto eliquat
iureetuer ipit ea feum zzriusci tion er sim zzrilissit vel ing esto eniamet luptatet la augait nulputat, vul-
laor sequi et la feugue facing erit wis am zzril iustis nim esequismolore doluptat. Ut la feu feu faccum
eum quipis estrud elent utpatue dunt velit lorperci euismodig ismolortie velese diam, consed
6
For customer service and technical support, please contact
American Technologies Network Corp.
North American Office
20 S. Linden Ave. Suite 1B, South San Francisco, CA 94080
phone: 800-910-2862, 650-875-0130; fax: 650-875-0129
European Office
phone: 44(0)870-0111286, fax: 44(0) 845-3349142
The following countries can use our
toll free number 00 800 9102-8620
Austria, France, Germany, Holland, Italy, Spain, Sweden, Switzerland
©2002 ATN Corporation
|