ISU512e
512 kbps ISDN Inverse Multiplexer with SNMP
®
™
Product Features
The ADTRAN ISU 512e is a standalone
ISDN Service Unit that connects data
The ISU 512e supports synchronous data
rates from 56 kbps to 512 kbps. At rates over
64 kbps, the ISU 512e supports BONDING
Mode 1 and MLPPP utilizing from one to
eight 64 kbps B channels. By supporting
BONDING the ISU 512e interoperates with
other BONDING-compatible inverse multi-
plexers and ISDN terminal adapters. By
supporting MLPPP the ISU 512e interoperates
with MLPPP compatible routers and bridges.
I Low cost inverse
terminal equipment (DTE) to the ISDN net-
work. The ISU 512e is specifically designed as
a low-cost solution for applications such as
video-conferencing, T1 backup, LAN/WAN
connectivity, and high-speed file transfer.
multiplexing
I Applications include
video-conferencing,
LAN/WAN connectivity,
high-speed file transfer,
and T1 backup
Embedded SNMP & Telnet are available
through a 10BaseT Ethernet port. Through
the Management Information Base (MIB)-II
standard and an ADTRAN-supplied enterprise
MIB, the ISU 512e can be configured, moni-
tored and diagnosed using standard SNMP
network management programs such as HP
I Supports up to four ISDN
Basic Rate lines
I Operates at synchronous
data rates of up to 512 kbps
The ISU 512e can be configured and main-
tained, locally or remotely, using a VT100
terminal interface. For remote configuration,
the unit can be accessed over the ISDN line.
I Supports industry stan-
dard BONDING and
Multilink PPP
®
®
®
Openview , Netview and SunNet Manager.
The front panel of the ISU 512e consists
of a two-line by 16 character LCD display,
seven LEDs, and a 16-button keypad. This
allows for configuring, dialing, testing, and
monitoring of the unit without data terminal
or test equipment.
I Dialing options include
front panel, stored number,
V.25 bis, DTR dialing, and
an RS-366 dial interface
The ISU 512e connects directly to the
ISDN network using up to four Basic Rate
ISDN (BRI) lines. By terminating four BRI
circuits, the ISU 512e can create an aggregate
bandwidth of up to 512 kbps which can be
used to backup a T1 circuit.
I Flash memory for
easy upgrades
Dialing from the unit is accomplished by
using the front panel, stored numbers, DTR
assertion, or V.25 bis in-band dialing. The
RS-366 parallel dial interface is available
for applications such as video-conferencing.
The ISU 512e also supports dedicated 2B1Q
services. This provides a dedicated point-to-
point service (as in a limited distance modern
or leased line application) with no dialing
necessary.
I Remote configuration
over ISDN line
Since ISDN is a switched digital service,
bandwidth can be established and utilized on
an as needed basis. Therefore, the ISU 512e is
well suited for applications where a high
bandwidth connection is needed to support
bursty or infrequent traffic like medical image
or large file transfer.
I Embedded SNMP
and Telnet
I 10BaseT Ethernet
SNMP access
I Standard five-year
warranty
|