ASX Active Digital Signal Cross-Connect
Part of ADC KRONE’s innovative family of active digital signal cross-connect products, the ASX
fully integrates an SDH multiplexer with a FlexDSX® cross-connect chassis. The product allows
easy migration of 2 Mbit equipment to next generation equipment, as well as enabling additional
capacity and transition to fibre optic backhaul to support increasing data rates.
The ASX is compatible with existing DSX installations and supports standard DSX functionalities
and advantages:
• Modular construction, featuring either wire-wrap or LSA-PLUS® punchdown cable
termination methods
• Easy circuit identification through the integrated LEDs
• Four-port jack cards with dual monitoring ports enable individual circuit monitoring in
both directions
• Cross-connection and patching of circuits
• Superior, intuitive cable management
The extremely compact STM-1 level SDH multiplexer supports 1+1 MSP on the link side and
management features are accessed via GIU interface. By fully integrating an SDH multiplexer into
the digital distribution frame, the ASX provides space savings, as well as reducing cabling and
maintenance costs.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
ASX Active Digital Signal Cross-Connect
O rd e r i n g I n f o r m a t i o n
Description
Catalog Number
ASX with LSA-PLUS® cross-connects, singlemode LC duplex fibre optic connectors, 155 Mbps
1310 wavelength; distance: 20km
1310 wavelength; distance: 50km
1550 wavelength; distance: 80km
1550 wavelength; distance: 120km
1550 wavelength; distance: 160km
ASX-100008-LC
ASX-110008-LC
ASX-120008-LC
ASX-130008-LC
ASX-140008-LC
ASX with LSA-PLUS® cross-connects, singlemode SC fibre optic connectors, 155 Mbps, bidirectional
Tx: 1310, Rx: 1550; distance: 20km
ASX-100008-SC
ASX-110008-SC
ASX-120008-SC
ASX-130008-SC
ASX-140008-SC
ASX-150008-SC
Tx: 1550, Rx: 1310; distance: 20km
Tx: 1310, Rx: 1550; distance: 40km
Tx: 1550, Rx: 1310; distance: 40km
Tx: 1310, Rx: 1550; distance: 80km
Tx: 1550, Rx: 1310; distance: 80km
ASX with STM-1 connector type: 1.6/5.6, 45° angled
Wire-wrap
ASX-220001
LSA-PLUS®
ASX-220008
Accessories
Three-conductor bantam patch cords for E1 jack interface
Single plug
0,3 m
PJ712
0,92 m
PJ716
1,83 m
PJ722
3,05m
PJ1210
PJ1212
PJ1415
PJ1420
PJ1425
PJ1430
PJ1450
3,66 m
4,58 m
6,1 m
7,63 m
9,15 m
15,25 m
Dual plug
0,3 m
PJ762
0,92 m
PJ766
1,83 m
PJ772
3,05m
PJ1310
PJ1312
PJ1520
PJ1525
PJ1530
PJ1550
3,66 m
6,1 m
7,63 m
9,15 m
15,25 m
Category 5 RJ45 to RJ45 patch cords
1 m
7063 2 527-04
7063 2 527-10
3 m
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
O rd e r i n g I n f o r m a t i o n
Description
Catalogue Number
Fibre optic patch cords
LC duplex connector (UPC) to LC duplex connector (UPC), 2 m
7066 1 788-52
7066 1 718-52
7066 1 528-52
7061 2 203-00
FOA-INLC015
LC duplex connector (UPC) to SC duplex connector (UPC), 2 m
LC duplex connector (UPC) to 2 FC duplex connectors (UPC), 2 m
Universal fibre optic adapter (duplex)
Fibre optic attenuator, LC 15 dB
Cross-connect wire
152 m roll
DSX-CCW/500
DSX-CCW/1000
DSX-CCW/2000
305 m roll
601 m roll
Wire-wrap tool kits
Manual
AUX-0X0165
AUX-0X0800
6417 2 055-01
Electronic
LSA-PLUS® insertion tool
Specifications
Dimensions (W x H x D): 209 x 482.6 x 254 mm
Weight:
15 kg
Power:
<11 Watts, -48VDC; 0.38 Watts for each LED
ENvIRONMENTAL
Operations:
Storage:
Transport:
ETS300-019-2-3 class 3.2
ETS300-019-2-1 class 1.2
ETS300-019-2-2 class 2.3
Interfaces:
64x E1, multiple mapping schemes are supported including 2Mbps framed,
2Mbps unframed, (2) STM-1, optical (IR/SR/LR) and electrical via SFP modules
1+1 MSP
Protection:
Reliability:
MTBF > 30 years.
Management:
Web-based integrated craft interface (ICI) including the support of smart default
settings IP based management
Local management access via 10/100BaseT interface
SNMP with trap messages supported
Non-volatile software and database stores including back-up and restoration
Timing:
E1 and line timing (Timing Marker) support
Integrated SDH equipment slave clock (SEC) according to ITU G.813
Re-timing option on the E1 interfaces
Standards:
In compliance with the ITU, ETSI, IEC, IEEE, IETF standards for E1 and SDH equipment
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
105350AE 11/07 Original
©
2007 ADC Telecommunications, Inc. All Rights Reserved
|