ALCATEL Mobile Phones E100 User Manual

Phone Function Keys  
Read First Before Use  
Installation and Set-up  
Set time and date  
Mute/unmute microphone  
Delete a phonebook entry  
1
OK key  
Press to select the function displayed on the  
handset screen directly above it.  
Choosing a site for the base unit and charger pod  
Note: If you subscribe to the Caller Display service, the time and date will be  
set automatically when you receive a call, but you may still need to set the  
correct year.  
Precautions  
When the microphone is muted, the handset displays MUTE ON, and your caller  
cannot hear you.  
1. Press MENU key to enter menu selection.  
/
/
/
/
If you have a Broadband line  
The signal quality will depend on the location and environment of the base and  
handset. Position your Versatis E100 / Versatis E150 away from sources of  
excessive heat (radiators, direct sunlight, etc.) and protect it from vibrations and  
dust. Never allow your telephone to come into contact with water or other liquids,  
or with aerosols. To reduce the risk of interference and optimize reception, take  
particular care not to install the base in the immediate vicinity of windows, large  
metal objects, reinforced concrete, televisions, music centres, VCR or DVD  
players, halogen lamps or heating devices, fluorescent lighting, burglar alarms,  
microwave ovens, computers, etc.  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key  
to select.  
2
Back/clear key  
If you connect your telephone to a line with a broadband connection, you  
will need to insert a microfilter between the telephone and the telephone  
line, otherwise you may get interference between the telephone and the  
broadband, which could cause problems.  
Press to delete a digit/a character in editing mode  
Press to return to idle mode.  
Press and hold to change the handset idle display  
between handset name and date/time.  
During a call, press the MUTE key to turn on/off the microphone.  
1. Press MENU key to enter menu selection.  
3. Press NAVIGATION key to select DELETE and then press OK key to select.  
4. Press NAVIGATION key to select an entry to delete and then press OK key.  
5. Press OK key again to confirm. A confirmation beep is played.  
Paging  
2. Press NAVIGATION key to select CLOCK&ALARM and then press OK key  
to select.  
The paging feature enables you to locate a missing handset if the handset is  
in range and contains charged batteries.  
3
Navigation key  
Press UP to access the call log* and press DOWN  
to access the phonebook when in idle mode.  
Press UP/DOWN to increase or decrease  
earpiece volume during a call.  
Press to increase or decrease the ringer volume.  
Press UP/DOWN to increase or decrease  
handsfree volume (Versatis E150 only)  
Scroll up/down a list.  
3. Press OK key to select DATE/TIME. The last stored date is displayed.  
Enter the current date (YY-MM-DD), press OK, then enter the time (HH-MM).  
Press HANDSET LOCATOR key located at the back of the base  
station. All the registered handsets start to ring.  
Once retrieved, press any key on the handset or the HANDSET  
LOCATOR key again to end the paging.  
Delete all entries from the phonebook list  
1. Press MENU key to enter menu selection.  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key  
to select.  
1
2
5
Change your handset’s name  
3
4
1. Press MENU key to enter menu selection.  
This telephone requires an electrical power supply in order to function.  
To clean your Versatis E100 / Versatis E150, use an antistatic cloth lightly  
moistened with water.  
3. Press NAVIGATION key to select DELETE ALL and then press OK key  
to select.  
2. Press NAVIGATION key to select PERSONAL SET and then press OK  
key to select.  
Call waiting  
6
8
4
Talk key  
Press to accept or make a call  
Press to activate handsfree mode (Versatis E150  
only)  
7
If you have subscribed to Call Waiting service, the earpiece will emit a beep  
tone to inform you that there is a second incoming call. The number or name  
of the second caller will also be displayed on your phone if you have  
subscribed to Caller Line Identification service (CLI). Please contact your  
network provider for more information on this service.  
4. Press OK key again to confirm. A confirmation beep is played.  
3. Press NAVIGATION key to select HANDSET NAME and then press OK  
key to select. The current handset name is displayed.  
4. Press BACK/CLEAR key to delete the characters one by one.  
Enter the new name (maximum 10 characters) and press OK key to confirm.  
A confirmation beep is played.  
NB: Your Versatis E100 / Versatus E150 is a DECT™* standard appliance  
designed to receive and transmit telephone calls. It is designed for  
connection to the public telecommunications network.  
Direct access memory  
5
Hang-up/Exit key  
Press and hold to switch the handset power  
on/off.  
Press to end a call.  
There are 2 direct access memories (Keys 1 & 2) in addition to the phonebook  
memory. A long press on the keys in idle mode will automatically dial the  
stored phone number.  
9
10  
12  
Fit the rechargeable batteries in each handset  
Press to return to idle mode in other menus.  
1) Install the AAA batteries (Brand name: CORUN, Capacity: Ni-MH 1.2V/  
400mAh, or Brand name: SANIK, Capacity: Ni-MH 1.2V/400mAh) into handset  
in accordance with the polarity marked in the battery compartment.  
2) Close the battery compartment cover, sliding it into place and pressing firmly  
to make sure it is secure.  
11  
Using your phonebook  
6
Recall (Flash) key  
Access to operator services*  
Menu key  
Press to access the main menu.  
Redial key  
Press to access the Redial list.  
Change the display language  
Your phone can store up to 50 phonebook memories.  
How to enter characters?  
Add/edit direct access memory  
1. Press MENU key to enter menu selection.  
2. Press NAVIGATION key to select PERSONAL SET and then press OK  
key to select.  
7
1. Press MENU key to enter menu selection.  
When you select a field in which you can enter text, you can enter the letters  
that are printed on the keys by pressing the relevant key once or several times.  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key to  
select.  
8
9
Star key  
3. Press NAVIGATION key to select LANGUAGE and then press OK key  
to select.  
For example, press  
the letter B, and so on... Spaces and other symbols can be entered using  
or  
once to insert the letter ‘A’, press  
twice to insert  
3. Press NAVIGATION key to select DIRECT MEM. and then press OK key to  
select.  
Press and hold to lock/unlock keypad.  
Press and hold to toggle between the external and internal calls when both are set up.  
4. Press NAVIGATION key to your desired language and press OK key to  
confirm. A confirmation beep is played.  
10 Hash key  
.
4. Press NAVIGATION key to select KEY 1 or KEY 2 and then press OK key.  
The stored name is displayed, or NO NUMBER if it is empty.  
If there is no number stored for the selected key or if you want to change the  
name or number currently stored, press MENU key to enter direct memory  
menu to add/edit the name or number.  
USER'S GUIDE  
Press and hold to insert a pause during a call.  
Press and hold to turn the ringer on/off.  
Store a contact in the phonebook  
Note : Once the display language is set, the option menus on the handset will  
switch to display in the selected language immediately.  
11 Mute key  
1. Press MENU key to enter menu selection.  
Press to mute / unmute the handset microphone.  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key  
to select.  
12 Call transfer/Intercom key  
Press to initiate an internal call.  
Make and answer calls  
5. Press NAVIGATION key to select EDIT NUMBER and then press OK key  
to select. The display shows the currently stored name, or ENTER NAME if  
there is no number stored. Edit or enter the name you want and then press  
OK key. The display shows the currently stored number, or ENTER NUMBER  
if there is no number stored. Edit or enter the number you want and then press  
OK key to confirm. A confirmation beep is played.  
ATLINKS Europe, 22 quai Gallieni 92150 Suresnes – France  
Make a callPredialling  
Press to hold the line and page another handset during a call.  
Press and hold to initiate a conference call.  
3. Press OK key again to enter NEW ENTRY.  
4. Enter the name of the contact (maximum 12 characters).  
To edit, press BACK/CLEAR key to delete the last character entered.  
Press OK key to confirm the name entry.  
Alcatel Logo and Alcatel name are trademarks of Alcatel and used under license by Atlinks.  
Dial the number (maximum 24 digits) and then press TALK key.  
*Subject to subscritption and availability of the service from the fixed line operator.  
Direct dialling  
Battery safety - CAUTION  
Connecting AC (electrical) power  
Unpacking your phone  
Press TALK key to take the line and then dial the number  
(maximum 24 digits).  
ONLY use the rechargeable batteries supplied with the handset.  
DO NOT use non-rechargeable batteries - they may explode and cause  
damage to your telephone.  
1. Plug the base adaptor cord into the power jack on rear panel of the base  
and the other end into a 100-240 Vac 50-60Hz electrical outlet.  
2. Connect telephone line cord into the phone jack on rear panel of the base  
and the other end into a main socket.  
In the box you will find:  
5. Enter the number of the contact (maximum 24 digits) and then press OK  
key to confirm. A confirmation beep is played.  
Base station  
the cordless handset (two handsets with a Twin system, and three with a  
Triple system)  
Call from redial list  
Delete direct access memory  
HANDSET LOCATOR button  
Press to page handsets.  
Press and hold to start registration procedure.  
Press REDIAL key in idle mode.  
Press NAVIGATION key to select an entry in the redial list and then  
press TALK key.  
• the base unit  
1. Press MENU key to enter menu selection.  
Only use rechargeable batteries with exactly the same specifications as  
those supplied with the product.  
Using non-rechargeable or non-conforming batteries can damage the  
product and could pose a health hazard (see Chapter 9 “Technical  
Specifications”).  
Failure to comply with this recommendation will invalidate the manufacturer's  
warranty.  
Batteries can split or leak if incorrectly inserted, opened or exposed to heat.  
Never dispose of batteries in a fire: they could explode.  
3. In case of twin or triple system, plug the charger power adaptor cord into  
the power jack on rear panel of charger and the other end into a 100-240  
Vac 50-60Hz electrical outlet.  
• two rechargeable battery cells for each handset  
• a battery compartment cover for each handset  
• a telephone line cable for the base unit  
• a mains power lead and adapter for the base unit  
• charger pods, each with an attached mains power lead and adapter, for  
multihandset system  
Access phonebook  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key  
to select.  
1. Press  
in idle mode to browse the phonebook entries. Alternatively, you  
Call from the call log  
3. Press NAVIGATION key to select DIRECT MEM. and then press OK key  
to select.  
can press MENU key, to display PHONEBOOK and then press OK.  
2. Press NAVIGATION key to select LIST and then press OK key to confirm.  
The phonebook entries will be listed in alphabetical order, and you can press  
NAVIGATION key to scroll through the stored entries.  
Before you use the cordless handset for the first time, it’s important to  
charge the batteries fully.  
Press  
in idle mode.  
What’s on the display?  
Press NAVIGATION key to select an entry in the call list and then  
press TALK key.  
4. Press NAVIGATION key to select KEY 1 or KEY 2 and then press OK key.  
The stored name is displayed (or NO NUMBER if it is already empty).  
5. Press MENU key to enter direct memory menu.  
6. Press NAVIGATION key to select DELETE and then press OK key to select.  
Press OK key again to confirm. A confirmation beep is played.  
A Display Icons  
B Displays when in menu mode to confirm  
your selection.  
C Indicates that more options are available.  
Use the UP / DOWN keys to scroll up/down.  
D Displays when in menu mode.  
Select BACK to return to the previous menu  
level. Select BACK to delete the last digit/  
character entered.  
Leave the handset on the charging cradle for 15 hours.  
A
3. Press OK key to view the details of the selected entry.  
CAUTION: Use only the power supply that came with this unit. Using other  
power supplies may damage the unit.  
Note: You need to subscribe to Caller Line Identification service to be able  
to see the caller’s number or name in the call log.  
Before you start to use your telephone make sure that all batteries are fully  
Note : Instead of pressing NAVIGATION key to browse the phonebook entries,  
you can press the numeric key corresponding to the first letter of the entry you  
wish to locate.  
charged for 15 hours.  
B
D
C
Base and charger power adaptor :  
Call from the phonebook  
S003IV060050 100-240V 16V 500mA ou IA5060 100-240V 16V 500mA  
S003IV060015 100-240V 16V 150mA ou IA5060 100-240V 16V 500mA  
Important note: This telephone is not designed for Emergency calls when the  
mains power fails  
Using the redial list  
Press  
Press NAVIGATION key to select an entry in the phonebook and then  
press TALK key.  
in idle mode.  
The redial list stores the last 5 numbers dialed.  
What the icons mean?  
Modify a phonebook entry  
For Emergency calls you should have a basic phone that operates without  
mains power, connected to your line so that you can make calls during a  
power failure.  
1. Press MENU key to enter menu selection.  
2. Press NAVIGATION key to select PHONEBOOK and then press OK key  
to select.  
Access redial list  
Indicates battery is fully charged.  
Indicates battery is fully discharged.  
Your Telephone Operations  
Switching on/off  
1. Press REDIAL key in idle mode and press NAVIGATION key to browse the  
redial list. The last number dialed will appear first in the redial list.  
2. Press OK key to view the details of the selected entry.  
Answer and end a call  
Indicates that an external call is connected or held.  
Icon blinks when receiving an incoming call.  
1. When the phone rings, press TALK key. You can also use handsfree mode  
thanks to a long press on TALK key (only on Versatis E150)  
2. To end a conversation, press HANG-UP/EXIT key.  
Press and hold the HANG-UP/EXIT key for more than 2 seconds to  
switch on/off the handset in idle mode.  
3. Press NAVIGATION key to select EDIT ENTRY and then press OK key  
to select.  
Indicates you have a new Voice Mail message*.  
Indicates you have new missed calls*, or the call log is being viewed.  
Displays when the phonebook is accessed.  
Save a redial number into the phonebook  
Notes: When the handset is OFF, it cannot be used for making calls including  
emergency calls. There will be no ringing during an incoming call. To answer  
a call, you will need to switch it back on. It may take some time for the handset  
to re-establish a radio link with the base unit.  
4. Press NAVIGATION key to select an entry to edit and then press OK key.  
The current name is displayed.  
1. Press REDIAL key in idle mode to go to the redial list.  
IMPORTANT NOTE: You can simply place the handset back on its base  
station or charger pod to end the call.  
2. Press NAVIGATION key to select an entry.  
Displays when the alarm clock is activated.  
Edit the name and then press OK key to confirm.  
5. Edit the number and then press OK key to confirm. A confirmation beep is  
played.  
3. Press MENU key to display SAVE NUMBER, then press OK key to display  
ENTER NAME. Enter the name of the contact (maximum 12 characters) and  
then press OK key to save the entry, and return the display to the redial list.  
Displays when handsfree is activated (Versatis E150 only).  
Displays when ringer volume is turned off.  
Use handsfree (only for Versatis E150)  
To lock/unlock the keypad  
Press and hold the TALK key at any moment to talk in handsfree mode.  
To deactivate the handsfree mode, press again the TALK key.  
Indicates that the handset is registered and within range of the base station.  
Icon blinks when the handset is out of range or is searching for a base.  
Press and hold the STAR key for 1 second to lock/unlock the keypad  
in idle mode.  
Displays when in menu mode to confirm your selection.  
Adjust the earpiece volume  
Note: Incoming calls can still be answered even if the keypad was locked.  
Indicates that more options are available.  
Use the UP / DOWN keys to scroll up/down.  
During a call, press NAVIGATION key to select from VOLUME 1 to VOLUME 3.  
Displays when in menu mode.  
Select BACK to return to the previous menu level.  

HP Hewlett Packard Hewlett Packard Computer Monitor Q1910S User Manual
Hobart Corp Convection Oven CN 901 CN904 User Manual
GE TRIVECTION ZET3058 User Manual
Electrolux Modular Cooking Range 900XP User Manual
Electrolux Cooktop ehs60041p User Manual
Dell PowerEdge SL300 User Manual
Cisco Systems Cisco Unified IP Conference Station 7937G User Manual
A T International CL82451 User Manual
Asus Computer Hardware TR DLS User Manual
ASRock Computer Hardware 775i915PL SATA2 User Manual