|
Nokia 3710 fold User Guide
Issue 1.2
Safety
3
Safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read
the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when
it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
4
Get started
Get started
Get to know your device, insert the battery, SIM card, and memory card, and learn some
important information about your device.
Keys and parts
1
2
3
4
5
6
7
8
9
Earpiece
Display
Navi™ key (scroll key)
Call key
Microphone
Keypad
Secondary camera
Left and right selection keys
End/Power key
Get started
5
10 Camera flash
11 Camera lens
12 Nokia AV Connector (2.5 mm)
13 Volume keys
14 Loudspeaker
15 Hidden display
16 Charger connector
17 Micro USB cable connector
18 Wrist strap eyelet
Insert the SIM card and battery
Note: Switch off the power and disconnect the charger and any other device
before removing the covers. Avoid touching electronic components while changing the
covers. Always store and use the device with the covers attached.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1
Open the back cover, and remove it.
6
Get started
2
3
Remove the battery.
Open the SIM card holder. Insert the SIM card into the holder withthe bevelled corner
facing down and the contact surface area facing toward the contacts of the device.
The side with the bevelled corner fits below the rim of the device. Close the SIM card
holder.
4
Line up the battery contacts, and insert the battery.
Get started
7
5
Place the battery cover on the device, that the hooks at the upper part of the cover
are aligned with the corresponding recesses on the device. Slide the back cover to
close it.
Insert and remove the memory card
Use only compatible microSD cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but some brands may not be fully
compatible with this device. Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Your device supports microSD cards with a capacity of up to 8 GB. The size of a single
file must not exceed 2 GB.
Insert the memory card
1
2
Switch the device off, and remove the back cover and battery.
Slide the memory card holder inwards to unlock.
8
Get started
3
Open the card holder, and insert the memory card into the holder with the contact
surface facing inwards.
4
5
Close the card holder, and slide it to lock.
Replace the battery and back cover.
Remove the memory card
1
2
Remove the back cover and the battery.
Open the memory card holder, and remove the memory card. Close the memory
card holder.
3
Replace the battery and back cover.
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1
Connect the charger to a wall outlet.
2
3
Connect the charger to the device.
When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
You can also charge the battery with a USB cable, using power from a computer.
1
2
Connect the USB cable to a USB port of a computer and to your device.
When the battery is fully charged, disconnect the USB cable.
If the battery is completely discharged, USB charging may not work. Use the charger
instead.
You do not need to charge the battery for a specific length of time, and you can use the
device while it is charging. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
Charging the device while listening to the radio may affect the quality of reception.
Get started
9
GSM antenna
Your device may have internal and external antennas. Avoid touching the antenna area
unnecessarily while the antenna is transmitting or receiving. Contact with antennas
affects the communication quality and may cause a higher power level during operation
and may reduce the battery life.
The figure shows the GSM antenna area marked in grey.
Accessories
Connect a USB cable
Headset
Warning:
When you use the headset, your ability to hear outside sounds may be affected. Do not
use the headset where it can endanger your safety.
When connecting any external device or any headset, other than those approved by
Nokiaforusewiththis device, to the NokiaAV Connector, pay special attention tovolume
levels.
10 Switch it on
Do not connect products that create an output signal as this may cause damage to the
device. Do not connect any voltage source to the Nokia AV Connector.
Strap
1
2
3
Open the back cover.
Thread the strap, and tighten it.
Close the back cover.
Switch it on
Learn how to switch on your device, and how to use the basic functions.
About your device
The wireless device described in this guide is approved for use on the GSM 850, 900,
1800, 1900 and WCDMA 900, 1700-2100, 2100 MHz networks. Contact your service
provider for more information about networks.
Your device may have preinstalled bookmarks and links for third-party internet sites
and may allow you to access third-party sites. These are not affiliated with Nokia, and
Nokia does not endorse or assume liability for them. If you access such sites, take
precautions for security or content.
Switch it on 11
Warning:
To use any features in this device, other than the alarm clock, the device must be
switched on. Do not switch the device on when wireless device use may cause
interference or danger.
When using this device, obey all laws and respect local customs, privacy and legitimate
rights of others, including copyrights. Copyright protection may prevent some images,
music, and other content from being copied, modified, or transferred.
Make back-up copies or keep a written record of all important information stored in
your device.
When connecting to any other device, read itsuser guide for detailed safety instructions.
Do not connect incompatible products.
The images in this guide may differ from your device display.
Refer to the user guide for other important information about your device.
Network services
To use the device you must have service from a wireless service provider. Some features
are not available on all networks; other features may require that you make specific
arrangements with your service provider to use them. Network services involve
transmission of data. Check with your service provider for details about fees in your
home network and when roaming on other networks. Your service provider can explain
what charges will apply.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device menu. Your
device may also have customized items such as menu names, menu order, and icons.
Access codes
To set how your device uses the access codes and security settings, select Menu >
Settings and Security >Access codes.
•
The security code helps to protect your device against unauthorised use. The preset
code is 12345. You can change the code and set the device to request the code.
Some operations require the security code regardless of the settings, for example,
if you want to restore the factory settings. Keep the code secret and in a safe place
separate from your device. If you forget the code and your device is locked, your
device will require service and additional charges may apply. For more information,
contact a Nokia Care point or your device dealer.
•
•
The PIN code, supplied with the SIM card, helps to protect the card against
unauthorised use.
The PIN2 code, supplied with some SIM cards, is required to access certain services.
12 Switch it on
•
PUK and PUK2 codes may be supplied with the SIM card. If you enter the PIN code
incorrectly three times in succession, you are asked for the PUK code. If the codes
are not supplied, contact your service provider.
•
•
The barring password is required when using the call barring service to restrict calls
to and from your device (network service).
To view or change the security module settings for the browser, select Menu >
Settings and Security >Security module.
Switch the device on and off
Switch on and off
Press and hold the power key.
Enter the PIN code
If requested , enter the PIN code (displayed as ****).
Set the time and date
If requested, enter the time and date.
You may be prompted to get the configuration settings from your service provider
(network service). For more information, contact your service provider.
Home screen
When the device is ready for use, and you have not entered any characters, the device
is in the home screen.
Switch it on 13
Display
1
2
3
4
5
6
7
8
9
Signal strength of the cellular network
Battery charge status
Indicators
Name of the network or the operator logo
Clock
Date (only if the enhanced home screen is deactivated)
Display
Function of the left selection key
Function of the scroll key
10 Function of the right selection key
You can change the function of the left and right selection key. See " Left and right
Enhanced home screen
With the enhanced home screen, you can display a list of selected information and
features that you can directly access.
Select Menu >Settings and Display >Home screen.
Activate the enhanced home screen
Select Home screen mode >On.
Organise and personalise the enhanced home screen
Select Personalise view.
Select the key used to activate the enhanced home screen
Select Home screen key.
14 Switch it on
Navigate in the home screen
Scroll up or down to navigate the list, and select Select, View, or Edit. The arrows
indicate that further information is available.
Stop navigating
Select Exit.
Shortcuts
When your device is in the home screen, you can use shortcuts.
List missed, received, and dialled calls
Press the call key. To make a call, scroll to the number or name, and press the call key.
Open the web browser
Press and hold 0.
Call the voice mailbox
Press and hold 1.
Use other keys as shortcuts
Indicators
You have unread messages.
You have unsent, cancelled, or failed messages.
The keypad is locked.
The device does not ring for incoming calls or text messages.
An alarm is set.
/
The device is registered to the GPRS or EGPRS network.
A GPRS or EGPRS connection is open.
/
/
The GPRS or EGPRS connection is suspended (on hold).
Bluetooth connectivity is activated.
A GPS signal is available.
No GPS signal available.
If you have two phone lines, the second line is in use.
All incoming calls are diverted to another number.
Calls are limited to a closed user group.
The currently active profile is timed.
A headset is connected to the device.
The device is connected to another device, using a USB cable.
Switch it on 15
Navigate the menus
The device offers a range of functions that are grouped into menus.
1
2
3
4
5
To access the menu, select Menu.
Scroll through the menu, and select an option (for example, Settings).
If the selected menu contains further submenus, select one (for example, Call).
Select the setting of your choice.
To return to the previous menu level, select Back.
To exit the menu, select Exit.
Change the menu view
Select Options >Main menu view. Scroll right, and select from the available options.
Rearrange the menu
Select Options >Organise. Scroll to the menu item to be moved, and select Move.
Scroll to where you want to move the menu item, and select OK. To save the change,
select Done >Yes.
Lock the keys
Lock the keypad to prevent accidental keypresses.
Lock the keypad
Select Menu, and press * within 3.5 seconds.
Unlock the keypad
Select Unlock, and press * within 1.5 seconds. If requested, enter the lock code.
Answer a call when the keypad is locked
Press the call key. When you end or reject a call, the keypad locks automatically.
Further features are Automatic keyguard and Security keyguard. See "Phone
When the device or keypad is locked, calls may be possible to the official emergency
number programmed into your device.
Functions without a SIM card
Some functions of your device may be used without inserting a SIM card, such as
Organiser functions and games. Some functions appear dimmed in the menus and
cannot be used.
Flight profile
In radio sensitive environments, where you are asked not to use your device, you can
still access your calendar, contacts list, and offline games by activating the flight profile.
16 Support and updates
indicates that the flight profile is active.
Activate the flight profile
Select Menu >Settings >Profiles and Flight >Activate or Personalise.
Deactivate the flight profile
Select any other profile.
Warning:
With the Flight profile you cannot make or receive any calls, including emergency calls,
or use other features that require network coverage. To make calls, you must first
activate the phone function by changing profiles. If the device has been locked, enter
the lock code.
If you need to make an emergency call while the device is locked and in the Flight profile,
you may be also able to enter an official emergency number programmed in your device
in the lock code field and select 'Call'. The device will confirm that you are about to exit
Flight profile to start an emergency call.
Support and updates
Nokia helps you in many ways to gain the most benefit from your device.
Support
When you want to learn more about how to use your product or you are unsure how
your device should function, see the user guide or see the support pages at
www.nokia.com/support or your local Nokia website, or with a mobile device,
If this does not resolve your issue, do one of the following:
•
Restart the device: switch off the device, and remove the battery. After about a
minute, replace the battery, and switch on the device.
•
•
Restore the original factory settings as explained in the user guide.
Update your device software regularly for optimum performance and possible new
features, as explained in the user guide.
If your issue remains unsolved, contact Nokia for repair options. See www.nokia.com/
repair. Before sending your device for repair, always back up the data in your device.
My Nokia
Select Menu >Applications >Extras >Collection >My Nokia.
My Nokia is a free service that regularly sends you text messages containing tips, tricks,
and support for your Nokia device. It also allows you to browse the My Nokia site where
Support and updates 17
you can find details about Nokia devices and download tones, graphics, games, and
applications.
To use the My Nokia service, it must be available in your country and supported by your
service provider. You must sign up to use the service. Call charges apply when you send
messages to sign up or unsubscribe. For terms and conditions, see the documentation
Download content
You may be able to download new content (for example, themes) to your device
(network service).
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
For the availability of different services and pricing, contact your service provider.
Update device software using your PC
You can use the Nokia Software Updater PC application to update your device software.
To update your device software, you need a compatible PC, a high-speed internet
connection, and a compatible USB data cable to connect your device to the PC.
To get more information and to download the Nokia Software Updater application, go
Software updates over the air
Your service provider may send device software updates over the air directly to your
device (network service). This option may not be available, depending on your device.
Downloading software updates may involve the transmission of large amounts of data
(network service).
Make sure that the device battery has enough power, or connect the charger before
starting the update.
Warning:
If you install a software update, you cannot use the device, even to make emergency
calls, until the installation is completed and the device is restarted. Be sure to back up
data before accepting installation of an update.
Request a software update
1
2
Select Menu >Settings and Phone >Phone updates to request available
software updates from your service provider.
Select Current sw details to display the current software version and check
whether an update is needed.
18 Make it your device
3
4
Select Downl. phone sw to download and install a software update. Follow the
instructions.
If the installation was cancelled after the download, select Install sw update to
start the installation.
The software update may take several minutes. If there are problems with the
installation, contact your service provider.
Restore factory settings
To restore the device back to the factory settings, select Menu >Settings >Rest. fact.
sett. and from the following:
Settings only — Reset all preference settings without deleting any personal data.
All — Reset all preference settings, and delete all personal data, such as contacts,
messages, media files, and activation keys.
Make it your device
Set up your device, personalise it, and connect it in several ways.
Basic settings
Phone settings
Select Menu >Settings and Phone.
Select from the following:
Language settings — To set the language of your device, select Phone language and
a language. To set the language of your device according to the information on the SIM
card, select Phone language >Automatic.
Memory status — View the memory consumption.
Automatic keyguard — Set the keypad to lock automatically after a preset time delay
when the device is in the home screen and no function has been used.
Security keyguard — Set the device to prompt for the security code to unlock the
keypad.
Voice recognition — Set up voice commands, or start voice recognition training.
Flight query — Set the device to prompt for the flight profile when you switch the
device on. In the flight profile, all radio connections are closed.
Phone updates — Allow software updates from your service provider (network
service). The available options may vary.
Network mode — To use GSM and (when available) 3G networks, select Dual mode.
This option is not available during an active call.
Operator selection — Manually select which network to use.
Help text activation — Set the device to display help text.
Start-up tone — Play a tone when you switch the device on.
Fold close handling — Select the behaviour of the device when the fold is closed.
Make it your device 19
Confirm SIM actions — Access additional network services from your SIM card. This
option may not be available, depending on your SIM card.
Security settings
Select Menu >Settings and Security.
When security features that restrict calls are in use (such as call barring, closed user
group, and fixed dialling), calls may be possible to the official emergency number
programmed into your device. Call barring and call diverting cannot be active at the
same time.
Select from the following:
PIN code request or UPIN code request — Set the device to request for the PIN or
UPIN code every time the device is switched on. Some SIM cards do not allow the code
request to be deactivated.
Call barring service — Restrict incoming calls to and outgoing calls from your device
(network service). A barring password is required.
Fixed dialling — Restrict your outgoing calls to selected phone numbers if supported
by your SIM card. When fixed dialling is activated, GPRS connections are not possible
except while sending text messages over a GPRS connection. In this case, the recipient’s
phone number and the message centre number must be included in the fixed dialling
list.
Closed user group — Define a group of people whom you can call and who can call
you (network service).
Security level — To request the security code whenever a new SIM card is inserted into
the device, select Phone.
Access codes — Change the security code, PIN code, UPIN code, PIN2 code, or barring
password.
PIN2 code request — Set the device to request the PIN2 code when using a specific
device feature protected by the PIN2 code. Some SIM cards do not allow the code request
to be deactivated. This option may not be available depending on your SIM card. For
details, contact your service provider.
Code in use — Display and select the type of PIN code to be used.
Auth. certificates or User certificates — View the list of the authority or user
certificates available on your device.
Security module — View Sec. module details, activate Module PIN request, or change
the module PIN and signing PIN.
Personalise your device
Give your device a personal touch with ringing tones, display backgrounds, and themes.
Add shortcuts for your preferred features, and attach enhancements.
20 Make it your device
Profiles
Your device has several profiles, which you can customise.
Select Menu >Settings and Profiles.
Select the desired profile and from the following:
Activate — Activate the profile.
Personalise — Modify profile settings.
Timed — Set the profile to be active for a certain period of time. When the time set for
the profile expires, the previous profile that was not timed becomes active.
Themes
With themes, you can personalise your device.
Select Menu >Settings and Themes.
Select a theme
Select Select theme >Themes and a theme.
Download more themes
Select Theme downld..
Tones
You can modify the tone settings of the currently active profile.
Select Menu >Settings and Tones. You can find the same settings in the Profiles menu.
Lights
You can activate or deactivate light effects associated with different device functions.
Select Menu >Settings and Lights.
Display
Select Menu >Settings and Display.
Select from the following:
Wallpaper — Add a background image to the home screen.
Home screen — Activate, organise, and personalise the home screen.
Home scr. font col. — Select the font colour for the home screen.
Navigat. key icons — Display the scroll key icons in the home screen.
Notification details — Display details in missed call and message notifications.
Fold animation — Display an animation when you open or close the fold.
Main menu view — Select the layout of the main menu.
Make it your device 21
Font size — Set the font size for messaging, contacts, and web pages.
Operator logo — Display the logo of the currently selected operator.
Cell info display — Display the cell identity, if available from the network.
My shortcuts
With personal shortcuts, you get quick access to frequently used functions of your
device. Select Menu >Settings and My shortcuts.
Left and right selection keys
To change the function assigned to the left or right selection key, select Left selection
key or Right selection key, and the desired function.
In the home screen , if the left selection key is Go to, to add, remove, or reorganise
functions, select Go to >Options >Select options or Organise.
Other shortcuts
Select from the following:
Navigation key — Assign other functions from a predefined list to the scroll key.
Home screen key — Select the movement of the scroll key to activate the home screen.
Assign dialling shortcuts
Create shortcuts by assigning phone numbers to the number keys 3-9.
1
2
Select Menu >Contacts >Speed dials, and scroll to a number key.
Select Assign, or, if a number has already been assigned to the key, select
Options >Change.
3
Enter a number or search for a contact.
Voice commands
You can use voice commands to make phone calls, launch applications, and activate
profiles. Voice commands are language-dependent.
Select Menu >Settings and Phone.
Set the language
Select Language settings >Phone language and the language.
Train voice recognition to your voice
Select Voice recognition >Voice training.
Activate a voice command for a function
Select Menu >Settings >Phone >Voice recognition >Voice commands, a feature,
and the function. indicates that the voice command is activated. If is not displayed,
select Add.
22 Make it your device
Play an activated voice command
Select Play.
Use voice commands
Rename or deactivate a voice command
Scroll to a function, and select Options >Edit or Remove.
Activate or deactivate all voice commands
Select Options >Add all or Remove all.
Connect
Your device provides several features to connect to other devices to transmit and receive
data.
Bluetooth wireless technology
With Bluetooth wireless technology, you can connect your device, using radio waves,
to a compatible Bluetooth device within 10 metres (32 feet).
Select Menu >Settings >Connectivity >Bluetooth.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following
profiles: SIM access, object push, file transfer, headset, handsfree, generic access, serial
port, generic object exchange, dial-up networking, device ID, phonebook access, service
discovery application, advanced audio distribution, audio video remote control, and
generic audio/video distribution. To ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved accessories for this model. Check
with the manufacturers of other devices to determine their compatibility with this
device.
Features using Bluetooth technology increase the demand on battery power and reduce
the battery life.
Set up a Bluetooth connection
1
2
Select My phone's name, and enter a name for your device.
To activate Bluetooth connectivity, select Bluetooth >On.
indicates that
Bluetooth connectivity is active.
3
4
5
To connect your device to an audio accessory, select Conn. to audio acc. and the
accessory.
To pair your device with any Bluetooth device in range, select Paired devices >
Add new device.
Scroll to a found device, and select Add.
Make it your device 23
6
Agree on a passcode (up to 16 characters) with the user of the other device and
enter the passcode on your device. To establish the connection, enter the passcode
on the other device, when requested.
Operating the device in hidden mode is a safer way to avoid malicious software. Do not
accept Bluetooth connectivity from sources you do not trust. Alternatively, switch off
the Bluetooth function. This does not affect other functions of the device.
Connect your PC to the internet
You can use Bluetooth technology to connect your compatible PC to the internet without
the PC Suite software. Your device must be able to connect to the internet (network
service), and your PC must support Bluetooth technology.
1
2
Make sure that your device can connect to the internet.
Pair your device with your PC using Bluetooth connectivity. Your device
automatically opens a packet data connection to the internet.
USB data cable
You can use the USB data cable to transfer data between your device and a compatible
PC or a printer supporting PictBridge.
Select USB mode
To activate the device for data transfer or image printing, connect the USB data cable,
and select from the following:
PC Suite — Use Nokia PC Suite on your PC.
Printing & media — Use your device with a PictBridge compatible printer or with a
compatible PC.
Data storage — Connect to a PC that does not have Nokia software, and use your device
as data storage
Change USB mode
Select Menu >Settings >Connectivity >USB data cable and the desired USB mode.
Connect a USB device
You can connect a USB storage device (for example, a memory stick) to your device and
browse the file system and transfer files.
1
2
3
Connect a compatible adapter cable to the USB port of your device.
Connect the USB storage to the adapter cable.
Select Menu >Gallery and the USB device.
Not all USB storage devices are supported, depending on their power consumption.
Synchronisation and backup
Select Menu >Settings >Sync & backup >Synchronisation and from the following:
24 Make it your device
Phone switch — Synchronise or copy selected data between your device and another
device using Bluetooth technology.
Create backup — Create a backup of selected data.
Restore backup — Select a stored backup file, and restore data to the device. Select
Options >Details for information about the selected backup file.
Data transfer — Synchronise or copy selected data between your device and another
device, PC, or network server (network service).
Packet data
General packet radio service (GPRS) is a network service that allows mobile devices to
send and receive data over an internet protocol (IP) based network.
Select Menu >Settings and Connectivity >Packet data >Packet data conn..
Select from following:
When needed — Establish the packet data connection only when an application needs
it. The connection is closed when the application is closed.
Always online — Automatically connect to a packet data network when you switch
the device on.
You can use your device as a modem by connecting it to a compatible PC. For details,
see the Nokia PC Suite documentation.
Network provider services
Your network provider provides several additional services you may want to use. For
some of these services, charges may apply.
Operator menu
Access a portal to services provided by your network operator. The operator can update
this menu with a service message. For more information, contact your network
operator.
SIM services
Your SIM card may provide additional services. You can access this menu only if it is
supported by your SIM card. The name and contents of the menu depend onthe available
services.
Accessing these services may involve sending messages or makinga phone call for which
you may be charged.
Position log
The network may send you a position request (network service). To subscribe and agree
upon the delivery of positioning information, contact your service provider.
Make it your device 25
Accept or reject an incoming position request
Select Accept or Reject.
View the latest position requests
Select Menu >Log >Positioning and Position log.
If you miss the request, the device automatically accepts or rejects it according to what
you have agreed with your service provider.
Info messages and SIM messages
Select Menu >Messaging.
View info messages
Select More >Info messages. You can receive messages on various topics from your
service provider (network service). For more information, contact your service provider.
View SIM messages
Select Options >SIM messages. SIM messages are specific text messages that are
saved to your SIM card. You can copy or move those messages from the SIM to the device
memory, but not vice versa.
Configuration settings
You can configure your device with settings that are required for certain services. You
may receive these settings as a configuration message from your service provider.
Select Menu >Settings.
Select Configuration and from the following:
Default config. sett. — View the service providers saved in the device, and set a default
service provider.
Act. def. in all apps. — Activate the default configuration settings for supported
applications.
Preferred access pt. — View the saved access points.
Device mgr. settings — Allow or prevent the device from receiving software updates.
This option may not be available, depending on your device.
Personal settings — Add manually new personal accounts for various services, and
activate or delete them. To add a new personal account, select Add or Options >Add
new. Select the service type, and enter the required parameters. To activate a personal
account, scroll to the account, and select Options >Activate.
26 Stay in touch
Stay in touch
Learn how to make calls, write text, send messages, and use the mail functionality of
your device.
Make calls
Make a voice call
Dial a number manually
Enter the phone number, including the area code, and press the call key.
For international calls, press * twice for the international prefix (the + character replaces
the international access code), enter the countrycode, the areacode withoutthe leading
0, if necessary, and the phone number.
Redial a number
To access the list of dialled numbers, in the home screen , press the call key. Select a
number or name, and press the call key.
Call a contact
Select Menu >Contacts and Names. Select a contact, and press the call key.
Handle voice calls
To handle calls with the fold, select Menu >Settings and Call >Answ. on fold
open.
Answer an incoming call
Press the call key, or open the fold.
End a call
Press the end key, or close the fold.
Mute the ringing tone
Select Silence.
When the fold is closed, press a volume key.
Reject an incoming call
Press the end key.
When the fold is closed, press and hold a volume key.
Adjust the volume in a call
Use the volume keys.
Stay in touch 27
Make a video call
In a video call, the video recorded with the front camera on your device is shown to the
video call recipient. To make a video call, you must have a USIM card and be connected
to a WCDMA network. For availability and subscription to video call services, contact your
service provider. The video call can be made to a compatible device or an ISDN client
between two parties. Video calls cannot be made while another voice, video, or data
call is active.
1
2
To start a video call, enter the phone number, including the area code.
Press and hold the call key, or select Options >Video call.
Starting a video call may take a while. If the call is not successful, you are asked to
try making a voice call or to send a message instead.
3
To end the call, press the end key.
Dialling shortcuts
You can assign phone numbers to the number keys 3-9.
1
2
Select Menu >Contacts >Speed dials, and scroll to a number key.
Select Assign, or, if a number has already been assigned to the key, select
Options >Change.
3
4
Enter a number or search for a contact.
To activate one key dialling, select Menu >Settings and Call >Speed dialling >
On
Use a dialling shortcut
Press a number key, then the call key.
Use one key dialling
Press and hold a number key.
Voice dialling
Make a phone call by saying the name that is saved in Contacts.
As voice commands are language-dependent, before voice dialling, select Menu >
Settings and Phone >Language settings >Phone language, and your language.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
1
In the home screen, press and hold the right selection key. A short tone sounds, and
Speak after the tone is displayed.
2
Say the name of the contact you want to dial. If the voice recognition is successful,
a list of proposed matches is displayed. The device plays the voice command of the
first match on the list. If it is not the correct command, scroll to another entry.
28 Stay in touch
Options during a call
Many of the options that you can use during a call are network services. For availability,
contact your service provider.
Activate options during a call
Select Options.
Some of the network options are Hold, New call, Add to conference, End all calls, and
the following:
Send DTMF — Send tone strings.
Swap — Switch between the active call and the call on hold.
Transfer — Connect a call on hold to an active call and disconnect yourself.
Conference — Make a conference call.
Private call — Start a private discussion in a conference call.
Voice messages
The voice mailbox is a network service to which you may need to subscribe. For more
information, contact your service provider.
Call your voice mailbox
Press and hold 1.
Edit your voice mailbox number
Select Menu >Messaging >More >Voice messages and Voice mailbox no..
Video messages
The video mailbox is a network service to which you may need to subscribe. For more
information, contact your service provider.
Call your video mailbox
Press and hold 2.
Edit your video mailbox number
Select Menu >Messaging and More >Video messages >Video mailbox no..
Call log
To view details of your calls, messages, data, and synchronisation, select Menu >Log
and the desired item.
Stay in touch 29
Note: The actual invoice for calls and services from your service provider may
vary, depending on network features, rounding off for billing, taxes, and so forth.
Call settings
Select Menu >Settings and Call and from the following:
Call divert — Divert your incoming calls (network service). You may not be able to
divert your calls if some call barring functions are active.
Anykey answer — Answer an incoming call by briefly pressing any key, except the
power key, the left and right selection keys, or the end key.
Automatic redial — The device redials the number automatically if a call fails. The
device tries to call the number 10 times.
Video-voice redial — The device automatically makes a voice call to the same number
to which a video call has failed.
Voice clarity — Improve speech intelligibility, especially in noisy environments.
Speed dialling — Dial the names and phone numbers assigned to the number keys
(2-9) by pressing and holding the corresponding number key.
Call waiting — The network notifies you of an incoming call while you have a call in
progress (network service).
Call dur. display — Display the duration of the call in progress.
Summary after call — Briefly display the approximate duration after each call.
Send my caller ID — Show your phone number to the person you are calling (network
service). To use the setting agreed upon with your service provider, select Set by
network.
Outgoing call line — Select the phone line for making calls, if your SIM card supports
multiple phone lines (network service).
Answ. on fold open — Answer or end a call by opening or closing the fold.
Text and messages
Write text, and create messages and notes.
Write text
Text input modes
To enter text, for example, when writing messages, you can use traditional
or
predictive
, and
Switch between text input modes
Select and hold Options. Not all languages are supported by predictive text input.
text input.
,
indicate the character cases.
indicates number mode.
30 Stay in touch
Switch between character cases
Press #.
Switch between letter and number modes
Press and hold #.
Set the writing language
Select Options >More >Writing language.
Traditional text input
Write a word
Press a number key, 2-9, repeatedly until the desired character is displayed. The
available characters depend on the selected writing language. If the next letter you
want to enter is located on the same key as the present one, wait until the cursor is
displayed, and enter the letter.
Insert common punctuation marks
Press 1 repeatedly.
Insert special characters
Press *, and select a character from the list.
Insert a space
Press 0.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add new
words.
Write a word
Press number keys, 2-9. Press each key only once for one letter.
Confirm a word
Scroll right, or press 0 to add a space.
Select the correct word
If the proposed word is not correct, press * repeatedly, and select the desired word from
the list.
Add a word to the dictionary
If the ? character is displayed after the word, the word you intended to write is not in
the dictionary. To add the word to the dictionary, select Spell. Enter the word using
traditional text input, and select Save.
Stay in touch 31
Write a compound word
Write the first part of the word, and scroll right to confirm it. Write the next part of the
word, and confirm again.
Text and multimedia messages
You can create a message and optionally attach, for example, a picture. Your device
automatically changes a text message to a multimedia message when a file is attached.
Text messages
Your device supports text messages beyond the limit for a single message. Longer
messages are sent as two or more messages. Your service provider may charge
accordingly. Characters with accents, other marks, or some language options take more
space, and limit the number of characters that can be sent in a single message.
The total number of characters left and the number of messages needed for sending
are displayed.
To send messages, the correct message centre number must be stored in your device.
Normally, this number is set by default through your SIM card.
Set the message centre number manually
1
2
Select Menu >Messaging and More >Msg. settings >Text messages >
Message centre.
Enter the name and the number supplied by the service provider.
Multimedia messages
A multimedia message can contain text, pictures, and sound or video clips.
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving device.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
For availability and subscription to the multimedia messaging service (MMS), contact
your service provider.
Create a message
1
2
Select Menu >Messaging and Create message.
Write your message.
To insert a special character or a smiley, select Options >Insert symbol.
32 Stay in touch
To attach an object to the message, select Options >Insert object. The message
type changes automatically to multimedia message.
3
4
To add recipients, select Send to and a recipient.
To enter a phone number or mail address manually, select Number or e-mail. Enter
a phone number, or select E-mail and enter a mail address.
Select Send.
Multimedia messages are indicated with an icon at the top of the display.
Service providers may charge differently depending on the message type. For details,
contact your service provider.
Read a message and reply
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Read a received message
Select View.
Reply to a message
Select Reply.
Read several received messages
Select Menu >Messaging and Inbox, and the desired message.
Send and organise messages
To send a message, select Send.
Note: The message sent icon or text on your device screen does not indicate
that the message is received at the intended destination.
If message sending is interrupted, the device tries to resend the message a few times.
If these attempts fail, the message is marked as failed in the Sent items folder.
The device saves received messages in the Inbox folder.
Flash messages
Flash messages are text messages that are instantly displayed upon reception.
Select Menu >Messaging.
1
Select More >Other messages >Flash message.
2
Write your message.
Stay in touch 33
3
Select Send to and a contact.
Nokia Xpress audio messages
Create and send audio messages using MMS in a convenient way.
Select Menu >Messaging.
1
2
3
4
Select More >Other messages >Audio message. The voice recorder opens.
To record your message, select
To stop recording, select
Select Send to and a contact.
.
.
Message settings
Select Menu >Messaging and More >Msg. settings.
Select from the following:
General settings — Set the font size for messages, and activate graphical smileys and
delivery reports.
Text messages — Set up message centres for text messages and SMS mail.
Multimedia msgs. — Allow delivery reports and the reception of multimedia messages
and advertisements, and set up other preferences related to multimedia messages.
E-mail messages — Allow mail reception, and set up other preferences related to mail.
Service messages — Activate service messages, and set up preferences related to
service messages.
Mail and Instant Messaging
Set up your device to send and receive mails from your mail account or to chat in your
instant messaging (IM) community.
Your device may support the Nokia Messaging Service (NMS) or the classic Nokia Mail
and Nokia IM, depending on your country. To see which messaging system is in use
select Menu >Messaging >More >E-mail.
If
appears on top of the display, the Nokia
Nokia Messaging Mail
Access your mail accounts from different providers with your mobile device to read,
write, and send mail.
34 Stay in touch
Before you can use mail, you must have an mail account. If you do not have already an
mail account, create it in Ovi. The menus may vary depending on the mail provider.
Set up mail
You can sign in to an existing mail account or set up a new Ovi Mail account.
Select Menu >Messaging >More >E-mail.
Sign in to your mail account
1
2
3
Select your mail service provider.
Enter your account ID and password.
Select Remember password to disable the password query when you access your
mail account.
4
Select Sign In.
To sign in to an additional mail account, select Add account.
Set up Ovi Mail
If you do not already have a mail account, you can create a Nokia account, which includes
the Ovi Mail service.
1
2
Select Get Ovi Mail.
Follow the instructions on the display.
Once you have created your new Nokia account, you can sign in to the Ovi Mail service
and start sending and receiving mail. You can also use the account to sign into other
Ovi services, such as IM. For more information, see www.ovi.com.
Read, create, and send mail
Select Menu >Messaging >More >E-mail and a mail account.
Read mail and reply
1
2
3
Select a mail and Open.
Use the scroll key to see the entire mail.
To reply to or forward a mail, select Options.
View and save attachments
Mails with attachments, for example, pictures, are marked with a paperclip icon. Some
attachments may not be compatible with your device, and cannot be displayed on your
device.
1
2
3
Expand the attachment list.
Select an attachment and View.
To save the attachment to your device, select Save.
Stay in touch 35
Create and send a mail
1
2
3
4
5
Select Options >Compose.
Enter the recipient’s mail address, the subject, and your message.
To attach a file to the mail, select Options >Attach file.
To capture an image to attach to the mail, select Options >Attach new image.
To send the mail, select Send.
Close the mail application
Select Sign Out.
Access IM from your mail account
Some mail service providers allow you to access your instant messaging account directly
from your mail account.
To sign in to your provider's instant messaging service when writing a mail, select
Options and your IM service.
Nokia Messaging IM
With instant messaging (IM) you can chat with other online users using your device.
You can use your already existing account with an IM community that is supported by
your device.
If you are not registered to a IM service, you can create an IM account with a supported
IM service, using your computer or your device. The menus may vary depending on the
IM service.
IM services
Sign in to an existing IM account
1
2
3
4
Select Menu >Messaging >More >IMs.
Select an IM service.
Enter your account ID and password.
Follow the instructions on the display.
Create a new Nokia account
To create a Nokia account, which includes mail and IM services, using your PC, visit
www.ovi.com. To create an account using your device, do the following:
1
2
Select Menu >Messaging >More >E-mail.
Follow the instructions on the display.
Use IM services simultaneously
To return to the IM main view, select Home from within any IM service.
1
36 Stay in touch
2
3
Select an IM service, and sign in.
To switch between IM services, in the contacts list view, scroll left or right.
Exchange messages
Select Menu >Messaging >More >IMs.
Send an IM
1
2
Select an IM service.
Select a contact from the contacts list.
Each conversation is on a tab in the conversation view.
Enter your message in the text box at the bottom of the display.
Select Send.
3
4
Receiving messages
When a new message arrives in your current conversation, the message appears at the
end of the chat history. When a new message arrives for another conversation, the
corresponding conversation tab flashes. To switch between conversations, do the
following:
1
2
Scroll up to the conversation tabs.
Scroll left or right to open a conversation.
When a new message arrives from another community, it is indicated at the top or
bottom corner.
Scroll up, and select Switch or Select.
Notification settings
Even when you are not using the application, you are notified of new messages. To
modify notification settings, do the following:
1
2
In the IM main view, select Options >IM settings.
Select a notification type and Save.
Leave the IM application
When you exit the Instant messaging (IM) application, you remain signed in to IM
services. Your sessions remain active for a period of time, according to your service
subscription. When the IM application is running in the background, you can open other
applications, and return to using IM without signing in again.
Close the IM window
Go to the IM main view, and select Exit.
Sign out from IM
Select Options >Sign Out.
Stay in touch 37
All conversations are closed.
Nokia Mail
Access your mail account with your device to read, write, and send mail. This mail
application is different from the SMS mail function.
Before you can use mail, you must have an mail account from an mail service provider.
For availability and the correct settings, contact your mail service provider. You may
receive the mail configuration settings as a configuration message.
Mail setup wizard
The mail setup wizard opens automatically if no mail settings are defined in the device.
To open the setup wizard, to add an additional mail account, select Menu >
Messaging and the existing mail account. Select Options >Add mailbox. You can also
create a new mail account on Ovi for free. Follow the instructions.
Write and send a mail
You may write your mail before connecting to the mail service.
1
2
Select Menu >Messaging and Create message >E-mail message.
Enter the recipient’s mail address, the subject, and the mail message. To attach a
file, select Options >Insert.
3
4
If more than one mail account is defined, select the account from which you want
to send the mail.
Select Send.
Read a mail and reply
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Select Menu >Messaging.
Download mail headers
Select your mail account.
Download a mail and its attachments
Select a mail and Open or Retrieve.
Reply to or forward a mail
Select Options >Reply or Forward.
38 Image and video
Disconnect from your mail account
Select Options >Disconnect. The connection to the mail account automatically ends
after some time without activity.
New mail notifications
Your device can automatically check your mail account at set intervals, and issue a
notification when new mail is received.
Select Menu >Messaging and More.
1
Select Msg. settings >E-mail settings >Edit mailboxes.
2
Select your mail account, Downloading sett., and the following options:
Update interval — Set how often your device checks your mail account for new
mail.
Automatic retrieval — Retrieve new mail automatically from your mail account.
3
To enable new mail notification, select Msg. settings >E-mail settings >New e-
mail notif..
Nokia IM
With the instant messaging (IM) network service, you can send short text messages to
online users. You must subscribe to a service and register with the IM service you want
to use. For availability, pricing, and instructions, contact your service provider. The
menus may vary depending on your IM service provider.
To connect to the service, select Menu >Messaging >IMs, and follow the instructions.
Image and video
Capture images
Activate the camera
Select Menu >Applications >Camera; or, if in video mode, scroll left or right.
Zoom in or out
In image mode, scroll up and down, or use the volume keys.
Capture an image
Select Capture.
Images are saved in Gallery.
Image and video 39
Activate the camera flash
To set the device to use the flash automatically if the lighting conditions require it, select
Options >Flash >Automatic. To set the device to always use the flash, select Flash
on.
Keep a safe distance when using the flash. Do not use the flash on people or animals at
close range. Do not cover the flash while taking a picture.
Display images after capture
Select Options >Settings >Photo preview time and the preview time.
End the image preview manually
Select Back.
Your device supports an image capture resolution of up to 1536x2048 pixels.
Record video clips
Activate video mode
Select Menu >Applications and Video camera, or, if in image mode, scroll left or right.
Start recording
Select Record.
Pause or resume recording
Select Pause or Continue.
Stop recording
Select Stop.
Video clips are saved in Gallery.
Camera and video settings
Select Menu >Applications >Camera.
In image or video mode, select Options and from the following:
Self-timer — Use the self-timer.
Effects — Apply different effects (for example, greyscale and false colour) to the
captured image.
White balance — Adapt the camera to the current light conditions.
Landscape format or Portrait format — Select the orientation of the camera.
Settings — Modify other camera and video settings, and select where to save images
and video clips.
40 Image and video
Gallery
Manage images, video clips, music files, themes, graphics, tones, recordings, and
received files. These files are stored in the device memory or on a memory card and may
be arranged in folders.
Photos
View images and play video clips with the Photos application.
Select Menu >Gallery >Photos.
Select from the following:
My photos — View images in a thumbnail grid. You can sort images by date, name, or
size.
Timeline — View images in the order they were captured.
My albums — Sort images into albums. You can create, rename and remove albums.
If you remove an album, the images inside the album are not deleted from the memory.
Rotate an image
Select Options >Landscape mode or Portrait mode.
View a slide show
A slide show uses the images of the currently selected folder or album.
1
2
3
Select My photos, Timeline, or My albums.
Select Options >Slide show.
Select Start slide show.
Edit images
You can, for example, rotate, flip, crop, and adjust the brightness, contrast, and colours
of images.
1
2
3
Select an image in My photos, Timeline, or My albums.
Select Options >Edit photo.
Select an editing option, and use the scroll key to change the settings or values.
Music and videos
Your device includes a media player for playing songs and video clips. Music and video
files stored in the music folder in the device memory or on the memory card are
automatically detected and added to the video or music library.
Select Menu >Gallery and Music & videos.
Select from the following:
Videos — List all available video clips.
Image and video 41
All songs — List all available songs. You can sort songs by artist, album, or genre, for
example.
Manage folders and files
To manage folders and files in Gallery, select Menu >Gallery.
View a list of folders
Select All content.
View a list of files in a folder
Select a folder and Open.
View the folders of the memory card when moving a file
Scroll to the memory card, and scroll right.
Print images
Your device supports Nokia XpressPrint, allowing you to print images in the JPEG file
format.
1
2
Connect your device to a compatible printer, using a USB data cable, or, if supported
by the printer, Bluetooth connectivity.
Select an image from Gallery and Options >Print.
Share images and video clips online
Share images and video clips in compatible online sharing services on the web.
To use online sharing, you must subscribe to an online sharing service (network service).
1
2
3
Select Menu >Gallery >Photos and a file.
Select Options >Send >Upload to web.
Select an online sharing service, and follow the instructions on the display.
You may also mark several images or video clips and upload them together to the online
sharing service.
You can view uploads on the internet pages of the online sharing service on your device.
For more information on online sharing and compatible service providers, see the Nokia
product support pages or your local Nokia website.
Memory card
Use a memory card to store your multimedia files, such as video clips, songs, sound files,
images, and messaging data.
Select Menu >Gallery >All content >Memory card.
42 Entertainment
Some of the folders in Gallery that contain content used by your device (for example,
Themes) can be stored on the memory card.
If your memory card has not been pre-formatted, you need to format it. When you
format a memory card, all data on the card is permanently deleted.
Format the memory card
Select Options >Mem. card options >Format memory card >Yes. When formatting
is complete, enter a name for the memory card.
Protect the memory card with a password
Select Options >Mem. card options >Set password. The password is stored in your
device, so you only have to enter the password when attempting to use the memory
card in another device.
Remove the memory card password
Select Options >Mem. card options >Delete password.
Check the memory consumption
Select Options >Details. The memory consumption of different data groups, and the
amount of available memory to install new software, is displayed.
Entertainment
Listen to music
Listen to music with the music player or radio, and record sounds or voice with the voice
recorder. Download music from the internet, or transfer music from your PC.
Warning:
Continuous exposure to high volume may damage your hearing. Listen to music at a
moderate level, and do not hold the device near your ear when the loudspeaker is in
use.
Media player
To open the media player, select Menu >Applications >Media player.
Music menu
Access your music and video files stored in the device memory or on the memory card,
download music or video clips from the web, or view compatible video streams from a
network server (network service).
Select Menu >Applications >Media player.
Entertainment 43
Play a media file
Select a file from the available folders and Play.
Download files from the web
Select Options >Downloads and a download site.
Update the music library after adding files
Select Options >Update library.
Create a playlist
1
2
3
Select Playlists >Create playlist, and enter the name of the playlist.
Add music or video clips from the displayed lists.
To store the playlist, select Done.
Configure a streaming service
You may receive the streaming settings as a configuration message from the service
provider. You can also enter the settings manually.
1
2
3
Select Options >Downloads >Streaming settings >Configuration.
Select a service provider, Default, or Personal config. for streaming.
Select Account and a streaming service account from the active configuration
settings.
Play songs
Operate the media player
Use the scroll key according to the virtual keys on the display.
Adjust the volume
Use the volume keys.
Start playing
Select
.
Pause playing
Select
.
Skip to the next song
Select
.
Skip to the previous song
Select twice.
44 Entertainment
Fast-forward the current song
Select and hold
.
Rewind the current song
Select and hold
.
Switch to the music menu
Select
.
Switch to the current playlist
Select
.
Leave the media player playing in the background
Press the end key.
Stop the media player
Press and hold the end key.
Change the media player look
Your device provides several themes to change the look of the media player.
Select Menu >Applications >Media player and Go to Media pl. >Options >
Settings >Media player theme and the desired theme.
The virtual keys may change depending on the theme.
Transfer music from a computer
You can transfer music to your device in the following ways:
•
Use Nokia Music to transfer, rip, burn, and play new music on your PC and mobile
•
Use PC Suite to connect your device to your PC using Bluetooth connectivity or a
compatible USB data cable, and use the Nokia Music Manager. To use a USB data
cable, select PC Suite as the connection mode.
•
•
Connect your device to your PC using Bluetooth connectivity or a compatible USB
data cable, and copy music files to the device memory. To use a USB data cable,
select Data storage as the connection mode.
Use Windows Media Player. Connect a compatible USB data cable, and select
Printing & media as the connection mode.
Radio
The FM radio depends on an antenna other than the wireless device antenna. A
compatible headset or accessory needs to be attached to the device for the FM radio to
function properly.
Entertainment 45
Select Menu >Applications >Radio.
Tune in to radio stations
1
To start the search, press and hold the scroll key left or right. To change the radio
frequency in 0.05 MHz steps, briefly press the scroll key left or right.
2
3
To save a station to a memory location, select Options >Save station.
To enter the name of the radio station, select Options >Stations >Options >
Rename.
Select Options and from the following:
Search all stations — Search automatically for the available stations at your location.
Set frequency — Enter the frequency of a radio station.
Station directory — Access a website with a list of radio stations.
Stations — List, rename, or delete saved stations.
Use the virtual keys on the display
Use the scroll key.
Change stations
Scroll up or down, or press the number key that corresponds to the number of the station
in the station list.
Adjust the volume
Use the volume keys.
Set the radio to play in the background
Briefly press the end key.
Close the radio
Press and hold the end key.
Radio settings
Select Menu >Applications >Radio.
Select Options >Settings and from the following:
RDS — Display information from the radio data system, such as the name of the station.
Auto-frequency — Allow the device to automatically switch to a frequency with better
reception (available when RDS is activated).
Play via — Listen using the headset or the loudspeaker.
Output — Switch between stereo and mono output.
Radio theme — Select the look of the radio.
46 Entertainment
Voice recorder
Record speech, sound, or an active call, and save the recordings in Gallery.
Select Menu >Applications >Voice recorder.
The recorder cannot be used when a data call or GPRS connection is active.
To use the graphical keys
,
, or , scroll left or right.
Start recording
Select , or, during a call, select Options >Record. While recording a call, all parties
to the call hear a faint beeping.
Pause recording
Select
.
Stop recording
Select . The recording is saved in the Recordings folder in Gallery.
To play or send the last recording, to access the listofrecordings, orto selectthe memory
and the folder to store the recordings, select Options and the appropriate option.
Equaliser
Adjust the sound when using the media player.
Select Menu >Applications >Equaliser.
Activate a predefined equaliser set
Scroll to a set, and select Activate.
Create a new equaliser set
1
2
3
Select one of the last two sets in the list and Options >Edit.
Use the scroll key to adjust the sound controls.
To save the settings and enter a name for the set, select Save and Options >
Rename.
Web
You can access various internet services with your device browser (network service).
The appearance of the internet pages may vary due to screen size. You may not be able
to see all the details on the internet pages.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
Entertainment 47
For the availability of these services, pricing, and instructions, contact your service
provider.
You may receive the configuration settings required for browsing as a configuration
message from your service provider.
Select Menu >Internet.
To set up the service, select Web settings >Configuration sett., a configuration, and
an account.
Browse the web
Select Menu >Internet.
Open the home page
Select Home; or in the home screen, press and hold 0.
Select a bookmark
Select Bookmarks.
Enter a web address
Select Go to address, enter the address, and select OK.
Select the last visited web address
Select Last web addr..
Search the web
If you search for the first time, select a search provider. Then select Search, enter the
search terms, and select Search.
Change the search provider
Select Options >Change provider.
After you connect to the service, you can start browsing its pages. The function of the
device keys may vary in different services. Follow the instructions. For more information,
contact your service provider.
Web uploads
On the web page of your online sharing service, you can view uploaded images and
video clips and modify settings (network service).
Select Menu >Internet and Web uploads.
Open an online sharing service
Select an online sharing service and a link offered by the service.
48 Entertainment
Modify settings
When an online sharing service is open, select Options >Settings.
Browser settings
While browsing the web, select Options >Settings and from the following:
Display — Select the font size, whether images are displayed, and how the text is
displayed.
General — Select the encoding type for the contents, whether web addresses are sent
as Unicode (UTF-8), and whether JavaScript™ is enabled.
The available options may vary.
Cache memory
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed are stored in the cache.
A cookie is data that a site saves in the cache memory of your device. Cookies are saved
until you clear the cache memory.
Clear the cache
While browsing, select Options >Tools >Clear the cache.
Allow or prevent cookies
Select Menu >Internet and Web settings >Security >Cookies.
Browser security
Security features may be required for some services, such as banking services or online
shopping. For such connections you need security certificates and possibly a security
module, which may be available on your SIM card. For more information, contact your
service provider.
To view or modify the security module settings, or to view a list of authority or user
certificates downloaded to your device, select Menu >Settings and Security >
Security module, Auth. certificates, or User certificates.
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used correctly
in order to benefit from increased security. The existence of a certificate does not offer
any protection by itself; the certificate manager must contain correct, authentic, or
trusted certificates for increased security to be available. Certificates have a restricted
lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the
certificate should be valid, check that the current date and time in your device are
correct.
Maps 49
Before changing any certificate settings, you must make sure that you really trust the
owner of the certificate and that the certificate really belongs to the listed owner.
Games and applications
You can manage applications and games. Your device may have some games or
applications installed. These files are stored in the device memory or an attached
memory card and may be arranged in folders.
Open an application
Select Menu >Applications >Extras.
Open a game or application
Select Games, Collection, or Memory card.
Scroll to a game or application, and select Open.
Set sounds, lights, and shakes for a game
Select Options >Application settings.
Download an application
Your device supports J2ME™ Java applications. Ensure that the application is compatible
with your device before downloading it.
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the Java
Verified™ testing.
You can download new applications and games directly or using your PC.
Download directly
Select Menu >Applications >Extras and Options >Downloads >App.
downloads or Game downloads; the list of available bookmarks is shown.
Download using your PC
Download applications and games to your PC and use PC Suite to install them on your
device.
For the availability of different services and pricing, contact your service provider.
Maps
With Maps, you can browse maps for different cities and countries, search for addresses
and different points of interest, plan routes from one location to another, see your
current location on the map if you have a GPS connection, and save locations and send
50 Maps
them to compatible devices. You can also purchase a licence for a navigation service
with voice guidance. This service is not available for all countries or regions.
About Maps
If there are maps available in your device or on an inserted memory card, you canbrowse
them without an internet connection. When you browse to an area which is not covered
by the maps already downloaded in your device, a map for the area is automatically
downloaded through the internet. You may be prompted to select an access point to
use with the internet connection.
Downloading maps may involve the transmission of large amounts of data through your
service provider's network. Contact your service provider for information about data
transmission charges.
You can also use the Nokia Map Loader PC software to download maps to your device.
To install Nokia Map Loader on a compatible PC, see www.nokia.com/maps.
Select Menu >Applications >Maps and from the following:
Last map — Open the map that was displayed last.
Find address — Search for a specific address.
Saved locations — Find a location you have saved on your device.
Rec. locations — View the locations you have browsed.
Current position — View your current location, if a GPS connection is available.
Plan route — Plan a route.
Extra services — Purchase a license for navigation.
Settings — Define the settings.
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely
solely on the cartography that you download for use in this device.
Nokia Map Loader
With the Nokia Map Loader application for PC, you can download maps and voice
guidance files from the internet. A memory card with sufficient space must be inserted
in your device. You must use the Maps application and browse maps at least once before
using Nokia Map Loader, as Nokia Map Loader uses the Maps history information to check
which version of the maps to download.
Download maps with Nokia Map Loader
1
Connect your device to the computer with a compatible USB data cable or Bluetooth
connection. If you use a data cable, select PC Suite as the USB connection method.
2
3
4
Open Nokia Map Loader on the computer.
Select a continent and a country or region.
Select the maps or services, and download and install them to your device.
Maps 51
On the Service tab of Nokia Map Loader, you can purchase navigation and traffic
information licences, travel guides, and download maps.
About GPS
The Global Positioning System (GPS) is operated by the government of the United States,
which is solely responsible for its accuracy and maintenance. The accuracy of location
data can be affected by adjustments to GPS satellites made by the United States
government and is subject to change with the United States Department of Defense civil
GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor
satellite geometry. Availability and quality of GPS signals may be affected by your
location, buildings, natural obstacles, and weather conditions. GPS signals may not be
available inside buildings or underground and may be impaired by materials such as
concrete and metal.
GPS should not be used for precise location measurement, and you should never rely
solely on location data from the GPS receiver and cellular radio networks for positioning
or navigation.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also
be affected by availability and quality of GPS signals.
GPS receiver
Your device has an internal GPS receiver. For the best signal from the satellites, place
your device in a position with an unobstructed view to the sky.
You can use GPS to support the Maps application. Find out your location, or measure
distances and plot coordinates.
Navigate to your destination
You can upgrade Maps to a full navigation system to be used by car and by foot. You
need a regional licence for the full navigation system. The car navigation is fully voice-
guided with two and three-dimensional map views. Pedestrian navigation is limited to
a speed of 30 km/h (18.6 miles/h) and provides no voice guidance. The navigation
52 Organise
service is not available for all countries and regions. For details, see your local Nokia
website.
Purchase a licence for navigation
Select Extra services. The licence is region-specific and can be used only in the selected
area.
Navigate to the destination
1
2
3
4
Select Plan route, and create a route.
Select Options >Show route >Options >Start navigation.
Accept the displayed disclaimer.
Select the language for voice guidance, if prompted.
If you deviate from the set route, the device automatically plans a new route.
Repeat the voice guidance
Select Repeat.
Silence the voice guidance
Select Options >Mute audio.
Stop navigating
Select Stop.
Navigate on foot
Select Settings >Routing settings >Route selection >On foot. This optimises the
routes you create for navigation on foot.
Organise
Let your phone help you to organise your life.
Manage contacts
Save names, phone numbers, and addresses as contacts in the device and on the SIM
card.
Select Menu >Contacts.
Select the memory to use for contacts
The device memory can save contacts with additional details, such as alternative phone
numbers. You can also save an image, a tone, or a video clip for a limited number of
contacts.
The SIM card memory can save names with one phone number attached to them. The
contacts saved in the SIM card memory are indicated with
.
Organise 53
1
2
SelectMore > Settings > Memory inuse to selecttheSIM card, the devicememory,
or both for your contacts.
Select Phone and SIM to recall contacts from both memories. When you save
contacts, they are saved in the device memory.
Handle contacts
Search for a contact
Select Names.
Scroll through the list of contacts, or enter the first characters of the contact's name.
Save a name and phone number
Select Menu >Contacts and Add new.
Add and edit details
Select Names, a contact, and Details >Options >Add detail.
Delete a detail
Select Names, a contact, and Details. Select a detail and Options >Delete.
Delete a contact
Select Names, a contact, and Options >Delete contact.
Delete all contacts
Select More >Del. all contacts >From phone mem. or From SIM card.
Copy or move contacts between the device and SIM card memories
Copy single contacts
Select Names >Options >More >Marking options >Mark. Mark the contacts you
want to copy or move, and select Options >Copy marked or Move marked.
Copy all contacts
Select More >Copy contacts or Move contacts.
Create a contact group
Arrange contacts into caller groups with different ringing tones and group images.
1
2
3
Select More >Groups.
Select Add or Options >Add new group to create a new group.
Enter the group name, optionally select an image and a ringing tone, and select
Save.
4
Select the group and View >Add to add contacts to the group.
54 Organise
Business cards
You can send and receive a person’s contact information from a compatible device that
supports the vCard standard.
Select Menu >Contacts and Names.
Send a business card
Select a contact, Options >More >Send business card, and the sending type.
Save a received business card
Select Show >Save.
Date and time
Modify date and time settings
Select Menu >Settings and Date and time.
Change the time zone when travelling
Select Menu >Settings and Date and time >Date & time settings >Time zone:,
and scroll left or right to select the time zone of your location.
The time and date are set according to the time zone and enable your device to display
the correct sending time of received text or multimedia messages.
For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of
Greenwich, London (UK).
Alarm clock
You can set an alarm to sound at a desired time.
Set the alarm
1
2
3
4
Select Menu >Applications >Alarm clock.
Set the alarm, and enter the alarm time.
To issue an alarm on selected days of the week, select Repeat: >On and the days.
Select the alarm tone. If you select the radio as the alarm tone, connect the headset
to the device.
5
Set the length of the snooze time-out period, and select Save.
Stop the alarm
Select Stop. If you let the alarm sound for a minute or select Snooze, the alarm stops
for the length of the snooze time-out period, then resumes.
Calendar
Select Menu >Calendar.
Organise 55
The current day is framed. If there are any notes set for the day, the day is in bold type.
Make a calendar note
Scroll to the date, and select Options >Make a note. Select the note type, and fill in
the fields.
View the day notes
Select View.
View a week
Select Options >Week view.
Delete all notes in the calendar
Select Options >Delete notes >All notes.
Delete old notes automatically after a specified time
Select Options >Settings >Auto-delete notes.
Edit settings related to the date and time
Select Options >Settings.
To-do list
You can save a note for a task you must do.
Select Menu >Applications >To-do list.
Add a note
If no note is added, select Add; otherwise, select Options >Add. Fill in the fields, and
select Save.
View a note
Select a note and View.
Notes
Select Menu >Applications >Notes.
Add a note
If no note is added, select Add; otherwise, select Options >Make a note. Write the
note, and select Save.
Send a note
Select Options >Send note and the sending type.
56 Organise
Nokia PC Suite
With Nokia PC Suite, you can manage your music and synchronise contacts, calendar
entries, notes, and to-do notes between your device and a compatible PC or a remote
internet server (network service). For more information, and to download PC Suite, visit
Calculator
Your device provides a standard, a scientific, and a loan calculator.
Select Menu >Applications >Calculator.
Select Options to select the calculator type or to view the operating instructions.
This calculator has limited accuracy and is designed for simple calculations.
Countdown timer
Select Menu >Applications >Countd. timer.
Normal timer
1
Select Normal timer, enter a time, and write a note that is displayed when the time
expires.
2
Select Start.
Interval timer
To have an interval timer with up to 10 intervals started, do the following:
1
2
Select Interval timer.
Select Start timer >Start.
To select how the interval timer should start the next period, select Settings >Cont.
to next period.
Stopwatch
You can measure time, take intermediate times, or take lap times using the stopwatch.
Select Menu >Applications >Stopwatch and from the following:
Split timing — Take intermediate times. To reset the time without saving it, select
Options >Reset.
Lap timing — Take lap times.
Continue — View the timing that you have set to the background.
Show last — View the most recently measured time if the stopwatch is not reset
View times or Delete times — View or delete the saved times
To set the stopwatch timing to the background, press the end key.
Green tips 57
Green tips
Here are tips on how you can contribute to protecting the environment.
Save energy
When you have fully charged the battery and disconnected the charger from the device,
unplug the charger from the wall outlet.
You do not need to charge your battery so often if you do the following:
•
•
•
Close and disable applications, services, and connections when not in use.
Decrease the brightness of the screen.
Set the device to enter the power saver mode after the minimumperiod of inactivity,
if available in your device.
•
Disable unnecessary sounds, such as keypad and ringing tones.
Recycle
Most of the materials in a Nokia phone are recyclable. Check how to recycle your Nokia
Recycle packaging and user guides at your local recycling scheme.
Learn more
For more information on the environmental attributes of your device, see
Product and safety information
Digital rights management
Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property,
including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can
access content protected with WMDRM 10, OMA DRM 1.0, OMA DRM 1.0 forward lock, and OMA DRM 2.0. If certain DRM software
fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be
revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM
software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content.
Digital rights management (DRM) protected content comes with an associated licence thatdefines your rights to use the content.
If your device has OMA DRM-protected content, to back up both the licence and the content, use the backup feature of Nokia PC
Suite.
58 Product and safety information
Other transfer methods may not transfer the licence which need to be restored with the content for you to be able to continue
the use of OMA DRM-protected content after the device memory is formatted. You may also need to restore the licence in case
the files on your device get corrupted.
If your device has WMDRM-protected content, both the licence and the content will be lost if the device memory is formatted.
You may also lose the licence and the content if the files on your device get corrupted. Losing the licence or the content may
limit your ability to use the same content on your device again. For more information, contact your service provider.
Some licence may be connected to a specific SIM card, and the protected content can be accessed only if the SIM card is inserted
in the device.
Accessories
Warning:
Use only batteries, chargers, and accessories approved by Nokia for use with this particular model. The use of any other types
may invalidate any approval or warranty, and may be dangerous. In particular, use of unapproved chargers or batteries may
present a risk of fire, explosion, leakage, or other hazard.
For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory,
grasp and pull the plug, not the cord.
Battery
Battery and charger information
Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4S. Nokia may make
additional battery models available for this device. This device is intended for use when supplied with power from the following
chargers: AC-8/AC-15. The exact charger model number may vary depending on the type of plug. The plug variant is identified
by one of the following: E, EB, X, AR, U, A, C, K, or UB.
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times
are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to
connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it
may take several minutes before the charging indicator appears on the display or before any calls can be made.
Safe removal. Always switch the device off and disconnect the charger before removing the battery.
Proper charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge
over time.
Avoid extreme temperatures. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures
reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery
performance is particularly limited in temperatures well below freezing.
Do not short-circuit. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct
connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might
happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the
battery or the connecting object.
Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. In the event of a battery leak, prevent
battery liquid contact with skin or eyes. If this happens, flush the affected areas immediately with water, or seek medical help.
Product and safety information 59
Damage. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or
other liquids. Batteries may explode if damaged.
Correct use. Use the battery only for its intended purpose. Improper battery use may result in a fire, explosion, or other hazard.
If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a
service centre for inspection before continuing to use it. Never use any charger or battery that is damaged. Keep your battery
out of the reach of small children.
Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from a
Nokia authorised service centre or dealer, and inspect the hologram label using the following steps:
Authenticate hologram
1
When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the
Nokia Original Enhancements logo when looking from another angle.
2
When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.
Successful completion of the steps is not a total assurance of the authenticity of the battery. If you cannot confirm authenticity
or if you have any reason to believe that your Nokia battery with the hologram on the label is not an authentic Nokia battery,
you should refrain from using it, and take it to the nearest Nokia authorised service centre or dealer for assistance.
Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will
help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing
it.
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold temperature,
moisture can form inside the device and damage electronic circuit boards.
60 Product and safety information
•
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry cloth
to clean the surface of the device.
•
•
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could
damage the device and may violate regulations governing radio devices.
•
•
•
Use chargers indoors.
Backup all data you want to keep, such as contacts and calendar notes.
To reset the device from time to time for optimum performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery, charger, or any accessory.
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you
help prevent uncontrolled waste disposal and promote the recycling of materials. Check product environmental information
The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and
electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This
requirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For more
Additional safety information
The surface of this device is nickel-free.
Small children
Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines in the normal use position at the ear or at least 1.5 centimetres (5/8 inch)away from
the body. Any carry case, belt clip, or holder for body-worn operation should not contain metal and should position the device
the above-stated distance from your body.
To send data files or messages requires a quality connection to the network. Data files or messages may be delayed until such
a connection is available. Follow the separation distance instructions until the transmission is completed.
Medical devices
Operation of radio transmitting equipment, including wireless phones, may interfere with the function of inadequately
protected medical devices. Consult a physician or the manufacturer of the medical device to determine whether they are
adequately shielded from external RF energy. Switch off your device when regulations posted instruct you to do so. Hospitals
or health care facilities may use equipment sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device
and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference
with the medical device. Persons who have such devices should:
•
•
•
Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
Not carry the wireless device in a breast pocket.
Hold the wireless device to the ear opposite the medical device.
Product and safety information 61
•
•
Turn the wireless device off if there is any reason to suspect that interference is taking place.
Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel
injection, electronic antilock braking, electronic speed control, and air bag systems. For more information, check with the
manufacturer of your vehicle or its equipment.
Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate your warranty. Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the
device, its parts, or accessories. Remember that air bags inflate with great force. Do not place your device or accessories in the
air bag deployment area.
Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft and may be illegal.
Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or death. Switch off the device at refuelling points such as near gas
pumps at service stations. Observe restrictions in fuel depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are often, but notalways, clearly marked. They include
areas where you would be advised to turn off your vehicle engine, below deck on boats, chemical transfer or storage facilities
and where the aircontains chemicals or particles such as grain, dust, ormetal powders. You shouldcheck with themanufacturers
of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their
vicinity.
Emergency calls
Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed
functions. If your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular
phone. The device may attempt to make emergency calls over both the cellular networks and through your internet call provider
if both are activated. Connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device
for essential communications like medical emergencies.
To make an emergency call:
1
If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to
complete the following:
•
•
•
Insert a SIM card if your device uses one.
Remove certain call restrictions you have activated in your device.
Change your profile from Offline or Flight profile to an active profile.
2
3
4
Press the end key as many times as needed to clear the display and ready the device for calls.
Enter the official emergency number for your present location. Emergency numbers vary by location.
Press the call key.
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the
only means of communication at the scene of an accident. Do not end the call until given permission to do so.
62 Copyright and other notices
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were developed by the independent scientific organisation ICNIRP
and include safety margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The
SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with the device transmitting at its highest certified power level in all tested
frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed
to use only the power required to reach the network. That amount changes depending on a number of factors such as how
close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.95 W/kg.
Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and testing
requirements and the network band. Additional SAR information may be provided under product information at
Copyright and other notices
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-509 product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Ovi, Nokia Xpress print, Nokia Xpress audio messaging, and Navi are trademarks or registered
trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Portions of the Nokia Maps software are ©1996-2010 The FreeType Project. All rights reserved.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior
written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior notice.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection
with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal
Copyright and other notices 63
and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license
is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE
RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER
CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES
THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may vary by region. Please check with
your Nokia dealer for details and availability of language options. This device may contain commodities, technology or software
subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).
The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require
assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by
Nokia could void the user's authority to operate this equipment.
Model number: 3710a-1
/Issue 1.2 EN
64 Index
Index
dialling
dialling shortcuts
digital rights
display settings
Symbols/Numbers
3G
18 downloads
A
E
access codes
11 e-mail
answering calls
anykey answer
applications
26 e-mail, attachments
29 e-mail, creating
49 e-mail, reading and replying to
33 equaliser
audio messages
B
F
backing up data
barring password
battery
23 factory settings, restoring
11 file management
13 flight profile
battery charge level indicator
Bluetooth
G
browser
browser security
browser settings
business cards
48 games
48 GPRS (general packet radio service)
54 GPS (global positioning system)
C
H
cable connection
cache memory
calculator
calendar
23 handsfree
48 headset
56 help application
54 home screen
call
I
call divert
call log
28 IM
call waiting
caller id
29 IM (instant messaging)
29 images
camera
38 in-call timer
39 indicators
camera settings
chat services (IM)
configuration
contacts
38 info messages
25 instant messaging
52 internet
cookies
K
D
keyguard
54 keypad lock
26 keys
date and time
dial
Index 65
L
PUK
language settings
lights
R
radio
location information
loudspeaker
redial
rejecting calls
restoring data
restoring settings
M
mail
mail setup
Maps
S
screen settings
scrolling
maps
media player
memory
security code
security module
security settings
sharing, online
shortcuts
memory card
message centre number
message sending
message settings
messages
signal strength indicator
SIM card
modem
SIM messages
software updates
speed dialling
status indicators
stopwatch
music
music player
My Nokia
N
strap
navigation
support resources
switching device on/off
synchronisation
Nokia Map Loader
Nokia support information
notes
T
O
text input
offline profile
text messages
themes
online sharing service
operator menu
time and date
to-do list
P
tones
packet data connection
PC Suite
transferring, files
phonebook
photographs
PictBridge
PIN
U
updates
—
device software
USB cable connection
position log
printing
USB connection
profiles
|
