QUICK REFERENCE GUIDE
MITEL
Turning the Handset On/Off
Transferring a Call
1. Press the More softkey.
2. Select New Call.
3. Dial the number to which you want to
transfer the call and press Call.
4. Select Release to connect the two parties.
5604 Wireless Handset
1. Press and hold the On-hook key
until “Switch on/off is displayed.
2. Press “Yes/No.”
1 Top/Alarm Button
2 Earpiece Speaker
3 Volume Up
Making a Call
4 Volume Down
5 Mute Button
6 Softkeys
7 Off-Hook Key
OR
Dial the number and press
of the called party is displayed if available.
OR
. The name
Wait for an answer, announce the transfer
and then select Release.
8 Five-way Navigation Key
9 Voice Mail Access
10 Key Lock and Upper/Lower Case
11 Microphone
Press
to open the call list and use the
Conference
Navigation key to scroll the list of your last
twenty calls. Press
OR
1. Press the Menu softkey.
2. Select Contacts, and select Call contact.
3. Select contact from list.
to dial.
1. Press the More softkey.
12 Space
2. Select New Call to put the current call on
hold.
13 Sound Off key
14 Tactile Indicators
15 On-hook and On/Off key
16 Colour Display
17 Headset Connector
18 LED
3. Dial the number of the third party.
4. Wait for an answer.
4. Press
or Call to dial the number.
5. Press More and then select Join to
conference all the parties together.
Answering a Call
Display Icons
Rejecting a Call
•
Press
to answer a call in normal
Signal Strength
Battery Status
Voice Mail
mode.
Read Message
New Colored Message
Missed Call
•
When the ring signal sounds, press
Call information will be stored in the
Call list.
OR
•
Press the
Handsfree key to answer
in speaker mode.
Adjusting Volume Levels
Microphone Off
Incoming Call
Outgoing Call
System Connection
Key Lock
Ending a Call
Press to end a call.
To adjust earpiece volume
during a call:
Loudspeaker On
Loudspeaker Off
Sound Off
•
•
Press upper and lower volume
buttons to increase/decrease volume.
Placing a call on Hold
To change ringer volume:
1. Press the More softkey.
Headset Connected
New Message
2. Select Hold/Retrieve to put the call on
hold.
Phone Lock
•
In the menu, select Settings.
Personal Alarm
New Message, Important
•
•
•
Select Sound & Alerts.
To retrieve the Held call:
Select Volume.
1. Press the More softkey.
Use the navigation key arrows to adjust
2. Select Hold/Retrieve to retrieve the call
on hold.
selected volume and press Back to save.
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2010, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
|